Preparation of New Photosensitive ZrO2 Gel Films Using Hydroxyl-Substituted Aromatic Ketones as Chemical Modification Reagents and their Patterning

ZrO₂ gel films were prepared from zirconium tetra-n-butoxide chemically modified with one of hydroxyl-substituted aromatic ketones and 1′-hydroxy-2′-acetonaphthone, by the sol-gel method. The obtained gel film showed an absorption band, characteristic of the π-π* transition of chelate ring, at around 410 nm. The band was shifted to longer wavelength region than those for the gel films using β-diketones. The reason is thought that the hydroxyl-substituted aromatic ketone has π-electron system to form the condensed chelate ring. The absorption band associated with the chelate ring gradually decreased in intensity with UV-irradiation using a high pressure mercury lamp. This indicates that the chelate ring dissociates by the UV-irradiation and that the gel film exhibits photosensitivity. Utilizing the photosensitivity, fine patterns (about 1 μm) could be fabricated by UV-irradiation through a mask and leaching.     

Potentiometric flow-injection determination of boron by using a flow-through tetrafluoroborate ion-selective poly(vinyl chloride) membrane electrode

A highly sensitive tetrafluoroborate ion-selective poly(vinyl chloride) membrane electrode was constructed and applied to a detector in the flow-injection determination of boron. Boron at the 10 ng ml^?1 level can be determined by converting it to tetrafluoroborate ion in a flow of hydrofluoric acid. A sampling rate of 30 h^?1 was achieved with a relative standard deviation of less than 2%.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Construction of an asymmetric quaternary carbon via an asymmetric aza-Claisen rearrangement and its application in the total synthesis of (+)-α-cuparenone

Excess lithium hexamethyldisilazide (LHMDS) with LiCl prompted the asymmetric aza-Claisen rearrangement of carboxamide and retarded the decomposition of its amide enolate. The addition of these two reagents was a key step that led to the total synthesis of (+)-α-cuparenone with a stereogenic quaternary center.     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

Synthesis,Properties, and π‐Dimer Formation of Oligothiophenes Partially Bearing Orthogonally Fused Fluorene Units

A series of oligothiophenes that incorporate cyclopenta[c]thiophene‐based units bearing spiro‐substituted dialkylfluorene was synthesized. Photophysical measurements indicated that there was no interruption in the conjugation along the oligothiophene backbones, irrespective of the number or position of this unit. Electrochemical measurements showed that the thiophene 7‐mers and 11‐mer exhibit reversible multi‐oxidation waves. The formation of cationic species was clearly observed from UV/Vis/NIR measurements. Furthermore, the UV/Vis/NIR spectra at 223 K under one‐electron oxidation conditions revealed that the unsubstituted thiophene or bithiophene units remained in the absence of intermolecular π–π interactions, whereas the formation of π‐dimeric species was observed for the thiophene 7‐mer containing an unsubstituted terthiophene ( U₃ ) unit. Theoretical calculations indicated that the combination of the U₃ unit and the all‐trans conformation decreased the intermolecular steric repulsion between the fused cyclopentene ring and its facing thiophene, which may contribute to the formation of the dimeric structure.