Effect of aeration on lignin peroxidase production by Streptomyces viridosporus T7A

The effect of aeration on lignin peroxidase production by Streptomyces viridosporus T7A was studied in a bench-scale bioreactor using a previously optimized growth medium (0.65% yeast extract and 0.1% corn oil, pH7.0) at 37°C and natural pH. Airflow rates of 0.3, 1.0, and 1.5 vvm and a fixed agitation of 200 rpm were initially studied followed by 1.0 vvm and 200, 300, 400, and 500 rpm. The use of 1.0 vvm and 400 rpm increased enzyme concentration 1.8-fold (100–180 U/L) and process productivity 4.8-fold (1.4–6.7 U/[L·h]) in comparison with the use of 200 rpm and 0.3 vvm. The inexpensive corn oil, used as carbon source, besides its antifoam properties, proved to be nonrepressive for enzyme production.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Degradation of ²-O-4 lignin model and related compounds by the ascomyceteChrysonilia sitophila (TFB 27441 strain)

Growth of the ascomyceteChrysonilia sitophila during degradation of lignin model dimers and monomers was compared to a glucose control. An inhibition of growth by Cα-carbonyl monomers and stimulation by β-O-4 lignin model and vanillyl alcohol were observed. A comparison of the degradation by this ascomycete with the basidiomycetePhanerochaete chrysosoporium showed similarities in relation to the type of degradation caused.     

The deformation of dextran molecules. Causes and consequences in ultrafiltration

The transfer of dextran T70 solutions through a skinned polysulfone hollow fiber membrane was studied with and without applied pressure. The molecular weight distributions of dextran in the feed and in the permeate were obtained by high pressure liquid chromatography. Two different phenomena appear to play important roles with regard to solute transfer. One is related to the shear stress imposed by the flow at the pore entrances, i.e. to permeate flux, and the other is related to the influence of solute concentration on the expansion of the macromolecular chains. These phenomena explain the observed variations with operating conditions of the overall rejection coefficient.     

Babassu mesocarp (Orbignya phalerata Mart) nanoparticle-based biosensors for indirect sulfite detection in industrial juices

Journal of Solid State Electrochemistry - The present work proposes a new electrochemical sulfite biosensor based on babassu mesocarp nanoparticles (BMNPs) immobilized on the surface of a pyrolytic...     

Chemometric Strategies to Develop a Nanocomposite Electrode for Simultaneous Determination of Ascorbic Acid,Dopamine, and Uric Acid

A simple and sensitive method for simultaneously measuring dopamine (DA), ascorbic acid (AA), and uric acid (UA) using a poly(1‐aminoanthracene) and carbon nanotubes nanocomposite electrode is presented. The experimental parameters for composite film synthesis as well as the variables related to simultaneous determination of DA, AA, and UA were optimized at the same time using fractional factorial and Doehlert designs. The use of carbon nanotubes and poly(1‐aminoanthracene) in association with a cathodic pretreatment led to three well‐defined oxidation peaks at potentials around ?0.039, 0.180 and 0.351 V (vs. Ag/AgCl) for AA, DA, and UA, respectively. Using differential pulse voltammetry, calibration curves for AA, DA, and UA were obtained over the range of 0.16–3.12×10^?3 mol L^?1, 3.54–136×10^?6 mol L^?1, and 0.76–2.92×10^?3 mol L^?1, with detection limits of 3.95×10^?5 mol L^?1, 2.90×10^?7 mol L^?1, and 4.22×10^?5 mol L^?1, respectively. The proposed method was successfully applied to determine DA, AA, and UA in biological samples with good results.     

Quartz Crystal Microbalance monitoring the real-time binding of lectin with carbohydrate with high and low molecular mass

A Quartz Crystal Microbalance (QCM) was used to monitor the mass changes on a quartz crystal surface containing immobilized lectins that interacted with carbohydrates. The strategy for lectin immobilization was developed on the basis of a multilayer system composed of Au–cystamine–glutaraldehyde–lectin. Each step of the immobilization procedure was confirmed by FTIR analysis. The system was used to study the interactions of Concanavalin A (ConA) with maltose and Jacalin with Fetuin. The real-time binding of different concentrations of carbohydrate to the immobilized lectin was monitored by means of QCM measurements and the data obtained allowed for the construction of Langmuir isotherm curves. The association constants determined for the specific interactions analyzed here were (6.4 ± 0.2) × 10⁴ M^− 1 for Jacalin–Fetuin and (4.5 ± 0.1) × 10² M^− 1 for ConA–maltose. These results indicate that the QCM constitutes a suitable method for the analysis of lectin–carbohydrate interactions, even when assaying low molecular mass ligands such as disaccharides.     

Thermal behavior of verapamil hydrochloride and its association with excipients

The thermal properties of verapamil hydrochloride (VRP) and its physical association as binary mixtures with some common excipients were evaluated. Thermogravimetry (TG) was used to determine the thermal mass loss, as well as to study the kinetics of VRP thermal decomposition, using the Flynn-Wall-Ozawa model. Based on their frequent use in pharmacy, five different excipients (microcrystalline cellulose, magnesium stearate, hydroxypropyl methylcellulose, polyvinylpyrrolidone and talc) were blended with VRP. Samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (m/m). DSC curves for pure VRP presented an endothermic event at 143 ± 2 °C (ΔH_melt = 132 ± 4 J g⁻¹), which corresponds to the melting (literature T_m = 143.7 °C, ΔH_melt = 130.6 J g⁻¹). Comparisons among the observed results for each compound and their binary physical mixtures presented no relevant changes. This suggests no interaction between the drug and excipient.     

Ethylbenzene to chemicals: Catalytic conversion of ethylbenzene into styrene over metal-containing MCM-41

Isomorphously substituted (MeDM) and impregnated metal-containing MCM-41 (MeO_x/IM) catalysts, in which Me = Co, Cu, Cr, Fe or Ni, have been prepared. Structural and textural characterizations of the catalysts were performed by means of X-ray diffraction (XRD), chemical analysis, Raman spectroscopy, electron paramagnetic resonance (EPR), N₂ adsorption isotherms and temperature programmed reduction (TPR). Cu²⁺, Co²⁺, and Cr⁴⁺/Cr³⁺ species were found over the catalysts as cations incorporated in the MCM-41 structure (MeDM) or highly dispersed oxides on the surface (MeO_x/IM). The MeDM catalysts exhibited a good performance in the dehydrogenation of ethylbenzene with CO₂. However, MeO_x/IM catalysts had a low performance in styrene production (activity less than 15 × 10^?3 mmol h^?1 and selectivity for styrene less than 80%) due to the high reducibility of the metals species. However, Ni²⁺ or Fe³⁺ coordinated with the MCM-41 framework, as well as NiO_x and Fe₂O₃ extra-framework species, is continuously oxidized by the CO₂ to maintain the active sites for dehydrogenating ethylbenzene. Deactivation studies on the FeDM sample showed that Fe³⁺ species produced active sp² carbon compounds, which are removed by CO₂; the referred sample is catalytically selective for styrene and stable over 24 h of reaction. In contrast, highly active Ni²⁺ and Ni⁰ species produced a large amount of polyaromatic carbonaceous deposits from styrene, as identified by TPO, TG and Raman spectroscopy. An acid–base mechanism is proposed to operate to adsorb ethylbenzene and abstract the β-hydrogen. CO₂ plays a role in furnishing the lattice oxygen to maintain the Fe³⁺ active sites in the dehydrogenation of ethylbenzene to form styrene.     

Theoretical analysis of aggregation in block‐copolymer films: The optical signature

We focus this work on the theoretical investigation of the block‐copolymer poly[oxyoctyleneoxy‐(2,6‐dimethoxy‐1,4phenylene‐1,2‐ethinylene‐phenanthrene‐2,4diyl) named as LaPPS19, recently proposed for optoelectronic applications. We used for that a variety of methods, from molecular mechanics to quantum semiempirical techniques (AM1, ZINDO/S‐CIS). Our results show that as expected isolated LaPPS19 chains present relevant electron localization over the phenanthrene group. We found, however, that LaPPS19 could assemble in a π‐stacked form, leading to impressive interchain interaction; the stacking induces electronic delocalization between neighbor chains and introduces new states below the phenanthrene‐related absorption; these results allowed us to associate the red‐shift of the absorption edge, seen in the experimental results, to spontaneous π‐stack aggregation of the chains. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010