Mononuclear and Dinuclear Copper Complexes of Tridentate Redox-active Ligands with Tunable H-bonding Donors: Structure,Spectroscopy and H+/e− Reactivity

In this research article, we describe the synthesis and characterization of mononuclear and dinuclear Cu complexes bound by a family of tridentate redox-active ligands with tunable H-bonding donors. The mononuclear Cu-anion complexes were oxidized to the corresponding “high-valent” intermediates by oxidation of the redox-active ligand. These species were capable of oxidizing phenols with weak O−H bonds via H-atom abstraction. Thermodynamic analysis of the H-atom abstractions, which included reduction potential measurements, pK_a determination and kinetic studies, revealed that modification of the anion coordinated to the Cu and changes in the H-bonding donor did not lead to major differences in the reactivity of the “high-valent” CuY complexes (Y: hydroxide, phenolate and acetate), which indicated that the tridentate ligand scaffold acts as the H⁺ and e⁻ acceptor.     

CiADS束流负载效应前馈补偿的仿真评估

在高功率超导质子直线加速器中，束流负载效应是影响超导腔幅相稳定性的一个重要因素。本工作基于谐振腔建场模型，开发了超导腔系统束流负载效应的时域仿真程序，分析了束流负载效应对超导腔幅相稳定性的影响，并在C-ADS注入器II上通过相关实验测量对仿真结果进行了验证。利用该程序，评估了CiADS超导直线加速器脉冲束流的脉冲长度，以及前馈补偿的时序抖动和束流纹波等因素对腔中电磁场幅相稳定度的影响。仿真结果表明:在当前CiADS直线加速器设计参数下，为满足超导腔中电磁场0.1%与在高功率超导质子直线加速器中，束流负载效应是影响超导腔幅相稳定性的一个重要因素。本工作基于谐振腔建场模型，开发了超导腔系统束流负载效应的时域仿真程序，分析了束流负载效应对超导腔幅相稳定性的影响，并在C-ADS注入器II上通过相关实验测量对仿真结果进行了验证。利用该程序，评估了CiADS超导直线加速器脉冲束流的脉冲长度，以及前馈补偿的时序抖动和束流纹波等因素对腔中电磁场幅相稳定度的影响。仿真结果表明:在当前CiADS直线加速器设计参数下，为满足超导腔中电磁场0.1%与$0.1^{\circ}$的幅相稳定度指标，前馈时序抖动的偏差不能超过0.79 μs，束流流强的直流偏差不能超过0.9%，并且给出了束流纹波的最大抖动幅值与纹波频率之间的关系。这些结果将为CiADS超导直线加速器相关子系统技术指标的确定提供依据。     

The Calibrating Theory in the Network Parameters Measurement of Microwave and MMW Devices

The paper introduces a special system calibration technology in s-parameters measurement of microwave and millimeter wave devices. The 8-term errors module is built by analyzing the signals flowing in the measurement system. Then the calibration technology using non-standard kits is designed on the base. Finally, the experiment using the calibration technology is introduced.     

Crystallographic report: catena‐Aqua(2,2′‐bipyrimidine)lithium(I) perchlorate

A lithium(I) coordination polymer has been formed from LiClO₄ and the 2,2′‐bipyrimidine (bpym) ligand in which each square pyramidal lithium(I) atom is coordinated in the basal plane by four nitrogen donor atoms derived from two bpym ligands and one water molecule at the apical position. These are connected into a layer structure via hydrogen‐bonding interactions involving the perchlorate anions. Copyright © 2004 John Wiley & Sons, Ltd.     

免疫算法在车辆调度问题中的应用

免疫算法是模仿生物体高度进化、复杂的免疫系统仿生的一种智能化启发式算法。本文根据车辆调度问题的具体情况，应用免疫算法解决车辆调度中路线安排问题，并提出了一种基于分组匹配的亲和力的计算方法。实验结果表明，免疫算法能有效地应用于车辆调度中路线安排问题。     

利用半导体光放大器进行光脉冲消基座的理论研究

提出了一种利用半导体光放大器(SOA)联合可调谐光滤波器进行高阶孤子压缩消基座的新方法.进行了详尽的理论分析和优化.数值计算表明,在一定条件下,这种方法能够在不展宽脉冲的前提下,对基座进行有效地抑制.     

Measurements of AIM for Visible Wavelength Based on Individual Eye Model

We measure and calculate the aerial image modulation （AIM） of human retina for visible wavelengths based on the individual eye model. By employing the optical design software ZEMAX, we obtain the modulation transfer function （MTF） of human eye in visible wavelengths. Using CSV-1000 and VAF-1000, the contrast sensitivity function （CSF） and the visual acuity （VA） for the same eye are measured. Then the AIM of human retina could be acquired by the relations between MTF and CSF and between MTF and VA. The AIM of human retina is independent of MTF, and the values of AIM for normal eyes （without retina disease） are similar, so the assembly average for large numbers of normal eyes can be a standard AIM curve, which is helpful for the diagnosis of diseases in the retina system.