Preliminary study of the thermally stimulated blue luminescence of ulexite

In this paper, novel results on the blue thermally stimulated luminescence (TSL) emission of ulexite (NaCaB₅O₆(OH)₆·5H₂O) have been studied. The four maxima appearing at 60, 110, 200 and 240°C on the TSL glow curves of this borate could be respectively associated to: (i) the first dehydration (NaCaB₅O₆(OH)₆·5H₂O→NaCaB₅O₆(OH)₆·3H₂O), (ii) the creation-annihilation of the three-hydrated phase, (iii) the Na-coordinated chains dehydroxylation and the starting point of the alkali self-diffusion through the lattice and (iv) the amorphisation of the lattice. These results are fairly well correlated with the differential thermal analyses (DTA), in situ thermal observations under environmental scanning electron microscope (TESEM) and thermal X-ray diffraction (TXRD) techniques.     

The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

Determination of oxytetracycline, tetracycline, and chlortetracycline in milk by liquid chromatography with postcolumn derivatization and fluorescence detection

A multiresidue method for isolation and liquid chromatographic determination of oxytetracycline (OTC), tetracycline (TC), and chlortetracycline (CTC) in milk is presented. The sensitivity of the method is adequate to meet the needs of regulatory agencies. The European Community established 100 micrograms/kg as the maximum residue limit (MRL) in milk for TC, CTC, and OTC. Recoveries exceeded 80% for all tetracyclines at all levels, with good precision. Correlation coefficients of standards curves for individual tetracyclines isolated from fortified samples ranged from 0.991 for CTC to 0.998 for OTC. Other antibiotics that might interfere with analysis did not interfere with elution times of OTC, TC, and CTC. The procedure is rapid, precise, and quantitative and requires minimal preparation and minimal use of organic solvents. It can be applied to routine surveillance programs. We can prepare 10 samples for analysis in about 1.45 h.     

Selective palladium-catalyzed cocyclotrimerization of arynes with dimethyl acetylenedicarboxylate: A versatile method for the synthesis of polycyclic aromatic hydrocarbons

Benzyne (1a) and the substituted derivatives 4,5-difluorobenzyne (1b) and 3-methoxybenzyne (2) undergo chemoselective palladium-catalyzed [2 + 2 + 2]-cocyclotrimerization with dimethyl acetylenedicarboxylate (DMAD) to afford the corresponding phenanthrenes and/or naphthalenes. The major products are phenanthrenes if Pd(PPh(3))(4) is used as the catalyst, naphthalenes if Pd(2)(dba)(3) is used. When the method is applied to polycyclic arynes 3-6, which are generated from the corresponding o-trimethylsilylaryl triflates, the same reactivity pattern is observed: the reaction can be selectively directed either toward the cocyclization of one molecule of aryne and two molecules of alkyne or to the reaction of two molecules of aryne with one molecule of alkyne, by appropriate choice of the palladium catalyst. The synthesis of polycyclic aromatic compounds 33-39 using this methodology is reported.     

Determination of ochratoxin A in maize bread samples by LC with fluorescence detection

Ochratoxin A (OTA) is a secondary fungal metabolite produced by several moulds, mainly by Aspergillus ochraceus, A. carbonarius, A. niger and by Penicillium verrucosum. The present work shows the results of comparative studies using different procedures for the analysis of OTA in maize bread samples. The studied analytical methods involved extraction with different volumes of PBS/methanol, different extraction apparatus, and clean-up through immunoaffinity columns. The separation and identification were carried out by high-performance liquid chromatography with fluorescence detection. The optimized method for analysis of OTA in maize bread involved extraction with PBS:methanol (50:50), and clean-up with IAC column. The limit of quantification was 0.033 ng g⁻¹. Recoveries ranged from 87% to 102% for fortifications at 2.000 and 0.500 ng g⁻¹, respectively, within-day R.S.D. of 1.4% and 4.7%. The proposed method was applied to 15 samples and the presence of OTA was found in nine samples at concentrations ranging from nd to 2.650 ng g⁻¹.     

Characterization of Pentaclethra macroloba oil

The Pracaxi oil—(Pentaclethra macroloba) contains high concentrations of fatty acids with emollient action that contribute to skin hydration. The use of this oil is supported by the utilization of natural resources thus enabling regional development and social contribution. The objective of this study was to characterize the P. macroloba oil by thermogravimetry (TG, DTG, and DTA), gas chromatography, Fourier transform infrared spectroscopy (FT-IR), and oxidation stability—Rancimat, aiming at the quality control of plant raw material. Three samples of crude oil sold by Amazon Oil Industry (Ananindeua, Pará, Brazil) were studied. The analysis of these oil samples showed different fatty acids, especially the behenic, oleic, linoleic, and lignoceric acids totalizing approximately 96 % of the grease composition and in smaller percentage arachidic, lauric, myristic, palmitic, and linolenic acids were found. The major acids have wide medicinal use. According to the TG/DTG curve, thermal stability was observed up to 220 °C, indicating a greater mass loss related to the dehydration and elimination of volatile substances. The thermal decomposition process occurred in the range of 430–450° C according to the DTG curve. The absorption spectrum in the infrared region (FT-IR) showed well-defined bands confirming the presence of functional groups present in the oil. Tests in a Rancimat have shown an induction period between 8 and 10 h demonstrating that the samples are in agreement with the standards required by ANP No. 14/2012 which requires at least 6 h of testing.     

Kinetics of particle growth VII. NH4NO3from the NH3-O3 reaction in the presence of air and water vapor

Our earlier work on the formation of particulate NH₄NO₃ in the NH₃? O₃ reaction at 25°C is extended to include air as a diluent and H₂O vapor as an additive. More extensive data at different values of [NH₃]/[O₃]₀ were obtained also, where [O₃]₀ is the initial O₃ concentration. In our earlier work we concluded that NH₄NO₃ vapor was dissociated to NH₃ + HNO₃ and that the HNO₃ was removed by diffusion to the walls with a rate coefficient k_diff = 0.4 min^?1 or by condensation on the suspended particles. Particles were nucleated by 8 NH₃? HNO₃ pairs when their concentration product reached 5.8 × 10²⁷ molec²/cm⁶ with a rate coefficient k_nucl of 6.2 × 10^?224 cm⁴⁵/min and removed by coagulation with a rate coefficient k_coag of 1.3 × 10^?7 cm³/min. A corrected calculation modifies the number of pairs required to 6–7 with a correspondingly changed value of k_nucl. With the more extensive data of the present study the indications are that the vapor-phase NH₄NO₃ monomer is not dissociated and that its diffusion constant for loss to the walls varies between 0.3 and 0.9 min^?1 for different reaction conditions. Nucleation occurs when the NH₄NO₃ vapor concentration reaches 1.0 × 10¹² molec/cm³ via. where r is 9 and the nucleation rate coefficient k_nucl is 3 × 10^?108 cm²⁴/min. With 5.0 or 9.5 torr of H₂O vapor present, there is an excess of particles produced over that expected from this rate coefficient, indicating an additional nucleation step in which H₂O vapor participates directly to produce a hydrated salt. The coagulation coefficient of (1.87 ± 0.14) × 10^?7 cm³/min found here is in good agreement with that found previously.