Tetrafluorobenzyne thermochemistry: experiment and theory

Gas-phase thermodynamic properties of 1,2,3,4-tetrafluorobenzyne (1 H-(2)) were determined by Fourier transform mass spectrometry and ab initio and density functional theory methods. 1,2,3,4-Tetrafluorobenzyne radical anion was generated by abstraction of a proton and a hydrogen atom upon reaction of 1,2,3,4-tetrafluorobenzene (1) with O(-.). The resulting structure was confirmed by converting it to a species which could be independently prepared. Bracketing results provided the proton affinity of 1,2,3,4-tetrafluorobenzyne radical anion and the electron affinities of 1,2,3,4-tetrafluorobenzyne and 1,2,3,4-tetrafluorophenyl radical. These measured values were combined in a thermodynamic cycle to provide the heat of hydrogenation of 1 H(2) (DeltaH degree (hyd) = 367 +/- 18 kJ mol(-1)) and the first and second CH bond dissociation energies of 1 (481 +/- 11 and 321 +/- 13 kJ mol(-1)). The same approach failed for the meta and para isomers, but their energetics were examined using B3LYP and CCSD(T) computations.     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Co-thickness and oxidation states effect on magnetic anisotropy in Co/MgO heterostructure

Interfacial magnetism and magnetic anisotropy constant ($K_i$) in Co/MgO heterostructure have been studied using ab-initio density functional calculations. It is found that interfacial Co spin magnetic moment shows a strong interdependence on Co-O bond lengths and a reasonable spin-polarization of ～80% is established as a function of Co layers. Our results revealed a saturated positive (out-of-plane) $K_i$ of +2.80 mJ/m² at ≥12 Co layers (～1.6 nm Co thickness), which is associated with orbital magnetic moment difference in [100] and [001] direction along with a strong hybridization between $d_{xy}$ and $d_{x^2?y^2}$ orbitals through orbital angular momentum operator $\stackrel{?}{L_z}$. Furthermore, it is shown that the $K_i$ magnitude almost remains constant and weakens in the case of under- and over-oxidations in the interfacial MgO and Co layers, respectively. Interestingly, $K_i$ improved for oxygen migrated interface due to enhanced $d_{xy}$ and $d_{x^2?y^2}$ orbitals coupling. The disordered interfaces stability is checked by analyzing the formation energy. Hence, the present findings disclose that the higher Co thickness in ordered Co/MgO structure supports to out-of-plane [001] (positive) $K_i$, which could be useful for its technological implementation in high-density magnetic data storage devices with high thermal stability.     

Mathematical modeling of a slurry reactor for DME direct synthesis from syngas

In this paper,an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether(DME) from syngas.This large-scale reactor is modeled using mass and energy balances,catalyst sedimentation andsingle-bubble as well as two-bubbles class flow hydrodynamics.A comparison between the two hydrodynamic models through pilot plantexperimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data thanhomogeneous single-bubble gas flow model.Also,by investigating the heterogeneous gas flow and axial dispersion model for small bubblesas well as the large bubbles and slurry(i.e.including paraffins and the catalyst) phase,the temperature profile along the reactor is obtained.Acomparison between isothermal and non-isothermal reactors reveals no obvious performance difference between them.The optimum values ofreactor diameter and height were obtained at 7 m and 50 m,respectively.The effects of operating variables on the axial catalyst distribution,DME productivity and CO conversion are also investigated in this research.     

A study of heat and mass transfer of Non-Newtonian fluid with surface chemical reaction

Considering the significance of non-Newtonian fluid usage in manufacturing such as molten plastics, polymeric materials, pulps, and so on, significant efforts have been made to investigate the phenomenon of non-Newtonian fluids. In this article the influences of heat and mass transfer on non-Newtonian Walter's B fluid flow over uppermost catalytic surface of a paraboloid is encountered. An elasticity of the fluid layer is considered in the freestream together with heat source/sink and has the tendency to cause heat flow in the fluid saturated domain. The flow problem of two-dimensional Walter's B fluid is represented using Law of conservation of mass, momentum, heat, and concentration along with thermal and solutal chemical reactive boundary conditions. The governing equations are non-linear partial differential equation and are non-dimensionalized by employing stream function and similarity transformation. The final dimensionless equations yielded are coupled non-linear ordinary differential equations. Furthermore, shooting technique along with RK-4th order method is used to get the numerical results. Graphs and tables are modeled by using MATLAB software to check the effects of Walter's B parameter, Chemical reaction parameter and Thickness parameter on temperature, velocity, and concentration profiles. Tabular analysis shows the results of some physical parameters like skin friction coefficient, Nusselt number and Sherwood number due to the variation of Walter's B parameter, thickness parameter and chemical reactive parameter.     

Synthesis and inverse virtual screening of new bi-cyclic structures towards cancer-relevant cellular targets

Structural Chemistry - We report here synthetic approaches to access new classes of small molecules based on three heterocyclic scaffolds, i.e. 3,7-dihydropyrimido[4,5-d]pyridazine-4,8-dione,...     

Methoxy-Substituted Tyramine Derivatives Synthesis,Computational Studies and Tyrosinase Inhibitory Kinetics

Targeting tyrosinase for melanogenesis disorders is an established strategy. Hydroxyl-substituted benzoic and cinnamic acid scaffolds were incorporated into new chemotypes that displayed in vitro inhibitory effects against mushroom and human tyrosinase for the purpose of identifying anti-melanogenic ingredients. The most active compound 2-((4-methoxyphenethyl)amino)-2-oxoethyl (E)-3-(2,4-dihydroxyphenyl) acrylate (Ph9), inhibited mushroom tyrosinase with an IC₅₀ of 0.059 nM, while 2-((4-methoxyphenethyl)amino)-2-oxoethyl cinnamate (Ph6) had an IC₅₀ of 2.1 nM compared to the positive control, kojic acid IC₅₀ 16700 nM. Results of human tyrosinase inhibitory activity in A375 human melanoma cells showed that compound (Ph9) and Ph6 exhibited 94.6% and 92.2% inhibitory activity respectively while the positive control kojic acid showed 72.9% inhibition. Enzyme kinetics reflected a mixed type of inhibition for inhibitor Ph9 (K_i 0.093 nM) and non-competitive inhibition for Ph6 (K_i 2.3 nM) revealed from Lineweaver–Burk plots. In silico docking studies with mushroom tyrosinase (PDB ID:2Y9X) predicted possible binding modes in the catalytic site for these active compounds. Ph9 displayed no PAINS (pan-assay interference compounds) alerts. Our results showed that compound Ph9 is a potential candidate for further development of tyrosinase inhibitors.     

Spin‐polarized electron gas in Co2M Si/SrTiO3 (M = Ti,V, Cr,Mn, and Fe) heterostructures

Spin‐polarized density functional theory is used to study the TiO₂ terminated interfaces between the magnetic Heusler alloys Co₂Si (M = Ti, V, Cr, Mn, and Fe) and the non‐polar band insulator SrTiO₃. The structural relaxation at the interface turns out to depend systematically on the lattice mis‐ match. Charge transfer from the Heusler alloys (mainly the M 3d orbitals) to the Ti d_xy orbitals of the TiO₂ interface layer is found to gradually grow from M = Ti to Fe, resulting in an electron gas with increasing density of spin‐polarized charge carriers. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Enhanced solubility of galangin based on the complexation with methylated microbial cyclosophoraoses

Methylated cyclosophoraoses (M-Cys) were synthesized by reaction using dimethyl sulfate with native Cys (unbranched cyclic β-1,2-d-glucans) isolated from Rhizobium leguminosarum biovar viciae VF-39. Its structure was proven using nuclear magnetic resonance (¹H NMR) spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Based on the enhanced hydrophobicity by methylation of Cys, we investigated the inclusion property with the water-insoluble flavonoid, galangin, through a phase solubility study using ultraviolet–visible spectroscopy. The solubility of galangin was enhanced 5.6-fold according to the added concentrations (1 mM) of M-Cys, compared to the 1.9-fold and 3.4-fold enhancements by β-Cyclodextrin (β-CD) and heptakis (2,6-di-O-methyl)-β-cyclodextrin (DM-β-CD), respectively. M-Cys was also shown to have the highest binding constant (5,534 M^?1) with galangin among the tested host molecules (β-CD, DM-β-CD, Cys, and M-Cys). From this result, we can infer that the complex of galangin with M-Cys is more stable than any of the other host molecules. The continuous variation method showed that the galangin/M-Cys complex was suitable for 1:1 stoichiometry. The formation of the complex was confirmed with ¹H NMR, FT-IR, differential scanning calorimetry, and scanning electron microscopy. Furthermore, the hypothetical molecular model of 1:1 galangin/M-Cys complex was suggested by molecular docking simulations. The cytotoxicity to the human cervical adenocarcinoma cell lines was enhanced by the galangin/M-Cys complex compared with free galangin. The obtained results indicate that M-Cys can be utilized as an effective complexing agent for galangin.