Direct Trifluoromethylation of Alcohols Using a Hypervalent Iodosulfoximine Reagent

The direct trifluoromethylation of a variety of aliphatic alcohols using a hypervalent iodosulfoximine reagent afforded the corresponding ethers in moderate to good yields (14–72 %). Primary, secondary, and even tertiary alcohols, including examples derived from natural products, underwent this transformation in the presence of catalytic amounts of zinc bis(triflimide). Typical reaction conditions involved a neat mixture of 6.0 equivalents of the alcohol with 1.0 equivalent of the reagent, with the majority of reactions complete within 2 h with 2.5 mol % of the Lewis acid catalyst. Furthermore, experimental evidence was provided that the C−O bond-forming process occurred via the coordination of the alcohol to the iodine atom and subsequent reductive elimination.     

Effect of Coolant Temperature on the Condensation Heat Transfer in Air-Conditioning and Refrigeration Applications

This article directly investigates the effect of a cooling medium's coolant temperature on the condensation of the refrigerant R-134a. The study presents an experimental investigation into condensation heat transfer, vapor quality, and pressure drop of R-134a flowing through a commercial annular helicoidal pipe under the severe climatic conditions of a Kuwait summer. The quality of the refrigerant is calculated using the temperature and pressure obtained from the experiment. Measurements were performed for refrigerant mass fluxes ranging from 50 to 650 kg/m²s, with a cooling water flow Reynolds number range of 950 to 15,000 at a fixed gas saturation temperature of 42°C and cooling wall temperatures of 5°C, 10°C, and 20°C. The data shows that with an increase of refrigerant mass flux, the overall condensation heat transfer coefficients of R-134a increased, and the pressure drops also increased. However, with the increase of mass flux of cooling water, the refrigerant-side heat transfer coefficients decreased. Using low mass flux in a helicoidal tube improves the heat transfer coefficient. Furthermore, selecting low wall temperature for the cooling medium gives a higher refrigerant-side heat transfer coefficient.     

Electrical characterization of polymer composite gel under biasing as polar medium

Polyvinyl alcohol (PVA) composed with polymethyl methacrylate (PMMA) polymer hydrogel was prepared by using boric acid as a cross-linking agent. The semicrystalline phase of composite gel was detected by X-ray diffraction tool. The occupied polymer PMMA morphology exhibits cross-linked alignment shown by scanning electron microscopy (SEM). The two-polymer system demonstrates an excellent dielectric property (with values, ε?=?590 for composite gel versus 400 compare to virgin PVA). The nonfluid media exhibit the impulse DC bias polarization. The basic principle of this work is to understand and control the electrical parameters under external stimuli (field) response by Impedance tool. In the biomedical field, this gel may be an excellent supporting media for sonographic as one of the best polar medium.     

Optimized AC conductivity correlated to structure,morphology and thermal properties of PVDF/PVA/Nafion composites

Polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA) composites were prepared by controlled loading of Nafion (5 to 15 wt%) by solution casting using water and dimethylformamide (DMF) as a solvent. The surface morphology of composite analyzed by atomic force microscopy (AFM) reveals the presence of Nafion ionomers. The increase in interlayer spacing of modified PVDF/PVA polymer system as a function of Nafion was detected by X-ray diffraction (XRD). The major change in Fourier transform infrared (FTIR) spectroscopy confirms the chemical bond C=O stretching around 1,700 cm^?1 due to Nafion. Differential scanning calorimetry (DSC) demonstrates the thermal stability of polymer composites and the decrease in melting temperature (T _m). The optimized AC conductivity (σ) of the prepared composite was evaluated by using an impedance analyzer as a function of temperature (40 to 150 °C) at constant 30-MHz frequency. The highest conductivity of 1.3?×?10^?2 S m^?1 was observed at 80 °C for 10 wt% of Nafion and correlated with structure, morphology and thermal properties of modified PVDF/PVA/Nafion composites. The experimental results may be useful for sensors, fuel cells and battery application domains.     

Evaluation of labelling conditions,quality control and biodistribution study of 99mTc-5-aminolevulinic acid (5-ALA): a potential liver imaging agent

Labelling of 5-aminolevulinic acid (5-ALA) with ^99mTc was achieved by using SnCl₂·2H₂O as reducing agent. Radiochemical purity and labelling efficiency was determined by instant thin layer chromatography/paper chromatography. Efficiency of labelling was dependent on many parameters such as amount of ligand, reducing agent, pH, and time of incubation. ^99mTc labelled 5-ALA remained stable for 24 h in human serum. Tissue biodistribution of ^99mTc-5-ALA was evaluated in Sprague–Dawley rats. Biodistribution study (% ID/g) in rats revealed that ^99mTc-5-ALA was accumulated significantly in liver, spleen, stomach and intestine after half hour, 4 and 24 h. Significant activity was noted in bladder and urine at 4 h. High liver uptake of ^99mTc-5-ALA makes it a promising liver imaging agent.     

A Tunable Trifluoromethyliodonium Reagent

Four complexes of MCl₄ (M=Ti, Zr, Hf) with the hypervalent trifluoromethyl iodine reagent trifluoromethyl‐1,3‐dihydro‐3,3‐dimethyl‐1,2‐benziodoxole ( 1 ,=L) are described. With TiCl₄, an I?O bond cleavage occurs, leading to the formation of the trifluoromethyliodonium alcoholate complexes [Ti₂Cl₆(L)₄]Cl₂ ( 2 a ) and Ti₂Cl₈(L) ( 2 b ). Reactions with ZrCl₄ and HfCl₄ form the complexes ZrCl₄(L)₂ ( 3 ) and HfCl₄(L)₂ ( 4 ), respectively, wherein the original I?O bond is retained and elongated compared to that in free 1 . Therefore, the reactivity of 1 can be easily and practically fine‐tuned by addition of different metal chlorides, following the order ZrCl₄/HfCl₄<TiCl₄<2 TiCl₄. Complexes 2 a , 3 , and 4 are remarkably bench‐stable forms of activated reagent 1 , while 2 b is readily accessible in situ. 2 a and 2 b represent the first “real” trifluoromethyliodonium reagents derived from iodanes, that is, with the I?O bond being completely cleaved. The new complexes were shown to be useful for the trifluoromethylation of para‐toluenesulfonate under aprotic conditions.     

Swapping Interface Contacts in the Homodimeric tRNA‐Guanine Transglycosylase: An Option for Functional Regulation

The enzyme tRNA‐guanine transglycosylase, a target to fight Shigellosis, recognizes tRNA only as a homodimer and performs full nucleobase exchange at the wobble position. Active‐site inhibitors block the enzyme function by competitively replacing tRNA. In solution, the wild‐type homodimer dissociates only marginally, whereas mutated variants show substantial monomerization in solution. Surprisingly, one inhibitor transforms the protein into a twisted state, whereby one monomer unit rotates by approximately 130°. In this altered geometry, the enzyme is no longer capable of binding and processing tRNA. Three sugar‐type inhibitors have been designed and synthesized, which bind to the protein in either the functionally competent or twisted inactive state. They crystallize with the enzyme side‐by‐side under identical conditions from the same crystallization well. Possibly, the twisted inactive form corresponds to a resting state of the enzyme, important for its functional regulation.