High-fidelity Recognition of Organotrifluoroborate Anions (R−BF3−) as Designer Guest Molecules

The recognition of boron compounds is well developed as boronic acids but untapped as organotrifluoroborate anions (R−BF₃⁻). We are exploring the development of these and other designer anions as anion-recognition motifs by considering them as substituted versions of the parent inorganic ion. To this end, we demonstrate strong and reliable binding of organic trifluoroborates, R−BF₃⁻, by cyanostar macrocycles that are size-complementary to the inorganic BF₄⁻ progenitors. We find that recognition is modulated by the substituent's sterics and that the affinities are retained using the common K⁺ salts of R−BF₃⁻ anions.     

The competitive behavior for O2 and CO2 reaction during char oxy-fuel combustion: effects of temperature and inherent minerals

Journal of Thermal Analysis and Calorimetry - Coal O2/CO2 combustion is a promising carbon capture and storage technology for coal-fired power plant. Char consumption rate prediction is essential...     

基于LED的多色温多星等单星模拟器

针对星模拟器与星敏感器观星的色温不匹配对星敏感器光信号定标精度产生的影响,设计了一种基于LED的多色温多星等单星模拟器,采用该系统模拟特定色温的星光用于星敏感器光信号定标,大幅降低了色温非匹配带来的定标误差。从理论上分析了色温非匹配影响星敏感器光信号的定标精度的机理;根据设计指标确定了星模拟器的设计方案,主要解决了光源的选型、多色温多星等单星模拟器驱动和控制系统、色温星等匹配算法、多色温多星等单星模拟器软件设计四项关键技术问题;对多色温多星等单星模拟器进行了标定和性能测试:0等星4000K和3等星7000 K星光的光谱匹配误差分别为4.87%和7.83%,星等等级分别为0.03和2.93;光源稳定后,多色温多星等单星模拟器的平行光管出口Φ100 mm口径内的照度非均匀度为6.5%,均满足设计指标。     

Structure and superconductivity in FexCu1−xBa2YCu2O7+y superconductors synthesized by high pressure

Comprehensive studies of X-ray diffraction, oxygen content, superconductivity and Mössbauer effect have been made on Fe_xCu_1−xBa₂YCu₂O_7+y superconductors (0.00≤x≤0.70) synthesized by ambient (AM) and high pressure (HP). Results indicate that all the HP-samples have tetragonal structure, smaller lattice parameter c and unit-cell volume than the AM-samples. The studies of oxygen content, and Mössbauer spectroscopy indicate that the HP-samples have higher oxygen content, carrier concentration and average valence of Fe than the AM-samples. Moreover, for the HP-samples more Fe atoms located in CuO_x chains have fivefold-oxygen coordination. These are important reasons for the enhancement of T_c in the HP-samples.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

ZnSe/SiO2复合薄膜光学常数与荧光光谱的研究

采用溶胶-凝胶工艺与原位生长技术，制备了ZnSe/SiO₂复合薄膜.X射线衍射分 析表明薄膜中ZnSe晶体呈立方闪锌矿结构.X射线荧光分析结果显示薄膜中Zn与Se摩尔比为1 ∶1.01—1∶1.19.利用场发射扫描电子显微镜观察了复合薄膜的表面形貌，结果表明复合薄 膜表面既存在尺寸约为400nm的ZnSe晶粒，也存在尺寸小于100nm的ZnSe晶粒.利用椭偏仪测 量了薄膜椭偏角Ψ，Δ与波长λ的关系，采用Maxwell-Garnett有效介质理论对薄膜的光学 常数、厚度、气孔率、ZnS 关键词： 2复合薄膜')" href="#">ZnSe/SiO₂复合薄膜 光学性质 椭偏光度法 荧光光谱     

F+H2→HF+H反应的全量子态分辨的散射动力学研究

利用高灵敏度的氢原子里德堡飞渡时间谱方法研究了 F H_2→HF H 反应碰撞能在5.02kJ/mol 下的交叉分子束反应态态散射动力学.所有在时间飞渡谱中被观测到的谱峰可以归属为 HF 产物的振转态结构.还观测到了明显的 HF(v’=3)前向散射,以及少许的 HF(v’=2)前向散射.     

CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。     

甲烷—空气燃烧中NOx生成的简化模型研究

用特征值－特征向量法对甲烷－空气燃烧时ＮＯＸ生成的化学反应机理进行了简化，得到了仅由１５个基元以应组成的简化反应模型。对比计算结果表明，该模型能在较宽燃空比内与全面模型很好吻合，因而可望用于燃烧过程数值模拟时对ＮＯＸ生成的预测