Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

A novel small-molecule near-infrared II fluorescence probe for orthotopic osteosarcoma imaging

Osteosarcoma is the most common primary malignant tumor of bone, particularly among children and adolescents. Advances in imaging, surgical techniques, and implants have dramatically reduced the need for amputation in the past three decades.Recently, in vivo fluorescence imaging in the second near-infrared window(NIR-II, 1,000–1,700 nm) shows impressive advantages of deeper tissue penetration and higher spatial resolution, which makes it a promising tool for the early diagnosis and post-operative observation of Osteosarcoma. To the best of our knowledge, this paper is the first time to develop a novel NIR-II fluorescence probe conjugated with an osteosarcoma targeted oligopeptide for molecular tumor imaging in a xenograft orthotopic osteosarcoma mouse model.     

Separation of Xylene Isomers in the Anion-Pillared Square Grid Material SIFSIX-1-Cu

Xylene isomer separation is considered one of the seven separation challenges that changed the world. In addition, the high-energy demand of xylene separation highlights the need for efficient novel adsorbents. Herein, the liquid-phase separation potential of the anion-pillared hybrid material SIFSIX-1-Cu was studied for preferential adsorption of o-xylene and m-xylene over p-xylene, which was inspired by a previous complexation crystallization method for separating m-xylene. We report detailed experimental liquid-phase adsorption experiments, yielding selectivities of 3.0 for o-xylene versus p-xylene and 2.6 for m-xylene versus p-xylene. Our theoretical calculations thus provide a reasonable explanation that the xylene adsorption selectivity is attributed to the C−H⋅⋅⋅F interaction, and the host–guest interaction order agrees with the adsorption priority: o-xylene > m-xylene > p-xylene.     

超高效液相色谱-串联质谱法鉴别十字花科植物中硫代葡萄糖苷

建立超高效液相色谱–串联质谱法鉴别十字花科植物中硫代葡萄糖苷的分析方法。采用70%甲醇水溶液提取白芥种子中的硫代葡萄糖苷,通过反相C18柱分离,电喷雾–离子阱–飞行时间质谱测定。利用硫代葡萄糖苷二级质谱裂解产生的m/z 195,241,259,275,291特征离子和伴随产生的80,162,163,196,242 Da中性分子丢失规律,共鉴别出5种硫代葡萄糖苷。     

Enhanced Propene/Propane Separation by Directional Decoration of the 12‐Membered Rings of Mordenite with ZIF Fragments

Propene/propane separation is challenging due to the very small difference in molecular sizes, boiling points and condensabilities between these molecules. Herein, we report a strategy of introducing ZIF fragments into traditional mordenite (MOR) zeolite to decorate the 12‐membered ring of MOR. After decoration, the originally ineffective zeolite MOR exhibited high kinetic propene/propane selectivities (139 at 25 °C) and achieved efficient propene/propane separation. The propene/propane separation potentials of the resulting adsorbents were further confirmed by breakthrough experiments with equimolar propene/propane (50/50) mixtures.     

收缩扩张管内液氮空化流动演化过程试验研究

本文基于低温空化试验平台研究了收缩扩张流道内液氮非定常空化流动的演化过程. 试验采用高时空分辨率的高速摄像机对77 K液氮在不同空化数σ下空穴结构的演变进行了精细化的分析和研究. 利用试验得到的空穴长度和面积等数据, 定量分析了液氮空化流动的非定常特性与时空演变规律. 研究结果表明: (1)在相似来流速度和温度条件下, 随着空化数的减小, 液氮空化流动呈现四种典型流型, 空穴长度在2.5 h以内为初生空化、空穴长度在2.5 h ~ 7.5 h之间为片状空化、空穴长度在7.5 h ~ 15 h之间为大尺度云状空化, 空穴长度超过15 h为双云状空化, 且在大尺度云状空化和双云状空化阶段均捕捉到了回射流现象; (2)液氮空化流动从初生空化到双云状空化, 脱落空穴的尺度逐渐增大, 空穴面积脉动的幅值和准周期均有所增加. 同时, 在大尺度云状空化与双云状空化阶段, 喉口处堵塞效应对空化流动的影响显著增强; (3)相比于初生空化, 片状空化、大尺度云状空化以及双云状空化中脱落空穴的移动距离依次增加了0.97倍、2.65倍与2.68倍, 溃灭时间依次增加了1.18倍、3.59倍与4.47倍, 但溃灭速度依次减小了0.10倍、0.20倍与0.30倍. 除此之外, 对于双云状空化阶段, 存在两种显著不同的脱落空穴演化过程.      

Direct allylation of α-aryl alcohols with allyltrimethylsilane catalyzed by heterogeneous tin ion-exchanged montmorillonite

The direct allylation of α-aryl alcohols with allyltrimethylsilane efficiently proceeded in the presence of tin ion-exchanged montmorillonite under mild conditions according to the proper addition order of reactants and a catalyst.     

Large-size oxyfluoride glasses used for vis–IR-transmitting windows

Windows for infrared sensors on missiles, aircraft and high energy laser systems must be of excellent spectral properties, high optical quality, large and durable enough to protect delicate sensors from harsh operating conditions. This paper describes work being done for IR window applications on heavy metal oxyfluoride (HMOF) glasses, which provide a combination of infrared transparency, strength, hardness, and environmental stability in a largely-sized formable material, and represents potential candidate materials for infrared windows.     

周向多线性爆炸成型弹丸技术研究现状与发展

传统的破片式防空反导战斗部爆炸后产生的破片杀伤元数量虽多,却不能有效击毁来袭的不敏感弹药,存在威力不足问题,因而限制了其发展。周向多线性爆炸成型弹丸(multiple linear explosively-formed projectile, MLEFP)战斗部爆炸后在周向产生多个高速、大质量、大长径比的对折型线性爆炸成型弹丸(linear explosively-formed projectile, LEFP),具备击穿、击爆厚壁壳体不敏感弹药的能力,因此在中近程防空反导作战中具备广阔的应用前景。从线性毁伤元的发展和对折型LEFP的成型技术出发,重点分析了炸药装药、药型罩等关键部件影响线性毁伤元成型的研究成果,对比了3种毁伤元初速工程计算模型的理论依据、优缺点等,概括了近年来对折型LEFP侵彻试验结果,最后总结了周向MLEFP战斗部及其毁伤元未来的发展方向。