Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Ion-pair formation of a copper(II)-ammine complex with an anionic surfactant and the recovery of copper(II) from ammonia medium by the surfactant-gel extraction method.

The extraction and separation of copper(II), zinc(II), cobalt(II), and cadmium(II) were investigated. Both copper(II) and zinc(II) formed ammine-complexes, while cadmium(II) and cobalt(II) formed hydroxide precipitates in an ammonia medium. By the addition of sodium dodecylsulfate (SDS), a copper(II) complex formed an ion-pair (copper-ammine-DS), which was extracted into the SDS phase. However, a zinc(II) complex did not form an ion-pair, and was soluble in water. Copper(II) ion was recovered by stripping (back-extraction) after the addition of hydrochloric acid. This method was applied to the separation of copper(II) in a brass alloy.     

Different acute effects of oral and intratracheal administration of disodium arsenate and gallium arsenide on heme synthesis in rats

The acute influences of arsenic compounds on the metabolism of porphyrins and heme in various organs of rats after oral or intratracheal administration of disodium arsenate (Na₂HAsO₄) and gallium arsenide (GaAs) were examined and compared. For the oral administration experiments, 21 or 84 mg of Na₂HAsO₄, or 2 or 4 g of GaAs, per cm³ saline per kg body weight of each animal was administered to Jcl: Wistar male rats and the organs were removed after exsanguination from the vein of the right axilla under anesthesia with ether, 16 h after administration. In the case of intratracheal administration, rats given 8.2 or 16.4 mg of Na₂HAsO₄, or 0.2 or 0.4 g GaAs per cm³ saline per kg body weight were examined under the same experimental conditions as for the administration route. Increase in the body weight of rats was suppressed after intratracheal administration of the two arsenic compounds. In these rats the hematocrit value increased significantly. These changes were not shown by the orally administered rats. Elevation in δ-aminolevulinate synthase (ALA-S, EC 2.3.1.37) activity in erythroblasts by Na₂HAsO₄ was much higher after intratracheal administration than after oral administration. Suppression in the activities of δ-aminolevulinate dehydratase (ALA-D, EC 4.2.1.24) and porphobilinogen deaminase (PBG-D, EC 4.3.1.8) in peripheral erythrocytes by Na₂HAsO₄ and GaAs were stronger by intratracheal administration than by the oral route. Influences of GaAs on the activity of PBG-D in rat liver were shown to be more effective by oral administration than by the intratracheal route. Oral administration of Na₂HAsO₄ and GaAs had a stronger suppression effect on the activities of ALA-D and PBG-D in rat kidney. It seems from these results that the different extents of the influence of arsenic compounds might depend on the routes of intake.     

Short-step synthesis of tamoxifen and its derivatives via the three-component coupling reaction and migration of the double bond

The anti-tumor agent, tamoxifen, is easily synthesized by the successive allylation of benzaldehyde and the Friedel-Crafts alkylation reaction of anisole with the intermediary homoallyl silyl ethers, followed by the migration of the double bond to form the desired tetra-substituted ethylenes. Several derivatives of tamoxifen are also produced according to a similar synthetic strategy.     

Discrimination of poly(vinyl chloride) samples with different plasticizers and prediction of plasticizer contents in poly(vinyl chloride) using near-infrared spectroscopy and neural-network analysis.

In the recycling of poly(vinyl chloride) (PVC), it is required to discriminate every plasticizer for quality control. For this purpose, the near-infrared spectra were measured for 41 kinds of PVC samples with different plasticizers (DINP, DOP, DOA, TOTM and Polyester) and different plasticizer contents (0-49%). A neural-network analysis was applied to the near-infrared spectra pretreated by second-derivative processing. They were discriminated from one another. The neural-network analysis also allowed us to propose a calibration model which predicts the contents of plasticizers in PVC. The correlation coefficient (R) and the root-mean-square error of prediction (RMSEP) for the DINP calibration model were found to be 0.999 and 0.41 wt%, respectively. In comparison, a partial least-squares regression analysis was carried out. The R and RMSEP of the DINP calibration model were calculated to be 0.993 and 1.27 wt%, respectively. It is found that a near-infrared spectra measurement combined with a neural-network analysis is useful for plastic recycling.     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Factors affecting polyhydroxybutyrate biosynthesis in the marine photosynthetic bacteriumRhodopseudomonas sp. strain W-1S

Applied Biochemistry and Biotechnology - A marine photosynthetic bacterium,Rhodopseudomonas sp. strain W-1S, accumulated polyhydroxybutyrate (PHB) to 56% of the dry cell weight under microaerobic...     

Reaction of Hypercoordinate Dichlorosilanes Bearing 8-(Dimethylamino)-1-naphthyl Group(s) with Magnesium: Formation of the 1,2-Disilaacenaphthene Skeleton

Migration of NMe(2) from C(naphthyl) to Si and Si-Si and Si-C bond formation to give a 1,2-disilaacenaphthene skeleton occurred in the reaction of hypercoordinate dichlorosilanes bearing the 8-(dimethylamino)-1-naphthyl group with two equivalents of magnesium [e.g., Eq. (a)]. The intermediate was isolated as the 1-isopropoxy derivative after quenching the reaction mixture with isopropyl alcohol.