Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Study on structural variation of silica gel using Nd3+ as a probe by photoacoustic spectroscopy

The structural variations of silica gels heated at different temperatures have been firstly studied using Nd(3+) as a probe by photoacoustic spectroscopy (PAS), together with IR spectroscopy and thermal analysis. With increasing temperature, the f-f transitions of Nd(3+) show a red shift and the PA intensities increase. The PA branching vector of the transitions from ground state to 4G(5/2)+(2)G(7/2), which are hypersensitive transitions, increase and the others decrease or change little. These indicate that the covalency of the bond that Nd(3+) forms increases and the symmetry around Nd(3+) decreases, which reflects the structural variations of silica gels.     

贵金属纳米材料的液相合成及其表面等离子体共振性质应用

金属中的表面等离子体共振是描述其导带电子在电磁场作用下集体振荡的一个物理概念。金属纳米颗粒由于其表面等离子体共振性质表现出独特的光学应用。本文在相关研究的基础上，综述了具备表面等离子体共振性质的不同形貌及多种复合结构的贵金属纳米材料的制备和应用，并对其发展及应用前景进行了展望。     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Zeolitic imidazolate framework-8 as a dispersive solid phase extraction sorbent for simultaneous determination of 145 pesticide residues in polyphenol-rich plants

Many plants have a high polyphenol content, which causes the matrix effect and makes the analysis of trace pesticide residues highly challenging. A common approach to improving matrix effects is to purify pesticides through the use of sorbents, but this requires a combination of multiple sorbents and extensive use. Zeolitic imidazolate framework-8 is widely used for pesticide analysis due to its high porosity, large specific surface area, and versatility. Here, we established and validated a modified quick, easy, cheap, effective, rugged, and safe method based on a zeolitic imidazolate framework-8 that was used to test the removal ability for polyphenols. To this end, 145 pesticide residues in peppermint, perilla, fennel, and mulberry leaves were analyzed by the modified method coupled with liquid chromatography with tandem mass spectrometry. The mean recoveries of all pesticide residues were in the range of 74.3–103.7%, with mean relative standard deviations ≤9.1% at spiked concentrations of 1, 10, 50, and 100 μg/kg for mulberry leaves. The limits of quantitation of the method ranged from 1 to 50 μg/kg. This study offers a reliable approach for the accurate quantitative analysis of various trace substances in the polyphenol-rich plants.     

New analytical method for the study of the metabolism of gentiopicroside in rats after oral administration by LC–TOF‐MS following picolinoyl derivatization

The metabolism of gentiopicroside (GPS) in vivo was studied for the first time by LC–MS following picolinoyl derivatization. Incubation of erythrocentaurin, one of the main in vitro metabolites of GPS by intestinal bacteria, with liver microsome indicated that GPS might be metabolized to a final metabolite 3,4‐dihydro‐5‐(hydroxymethyl)isochroman‐1‐one (HMIO) in vivo. After hydrolysis with sulfatase, HMIO was successfully detected in rat plasma after oral administration of GPS by LC–MS following picolinoyl derivatization. 4‐Methoxyphenyl methanol was used as an internal standard to quantify HMIO in rat plasma. A metabolic pathway of GPS in rats is proposed. The monoterpene compound GPS was found to be metabolized to dihydroisocoumarin, which may be responsible for the pharmacological effect of GPS.     

MOF-Derived Double-Layer Hollow Nanoparticles with Oxygen Generation Ability for Multimodal Imaging-Guided Sonodynamic Therapy

The high reactive oxygen species (ROS) generation ability and simple construction of sonosensitizer systems remain challenging in sonodynamic therapy against the hypoxic tumor. In this work, we rationally prepared MOF-derived double-layer hollow manganese silicate nanoparticle (DHMS) with highly effective ROS yield under ultrasound irradiation for multimodal imaging-guided sonodynamic therapy (SDT). The presence of Mn in DHMS increased ROS generation efficiency because it could be oxidized by holes to improve the electron–hole separation. Moreover, DHMS could produce oxygen in the tumor microenvironment, which helps overcome the hypoxia of the solid tumor and thus enhance the treatment efficiency. In vivo experiments demonstrated efficient tumor inhibition in DHMS-mediated SDT guided by ultrasound and magnetic resonance imaging. This work presents a MOF-derived nanoparticle with sonosensitive and oxygen generating ability, which provides a promising strategy for tumor hypoxia in SDT.     

Two‐Dimensional Nanomaterials for Photothermal Therapy

Two‐dimensional (2D) nanomaterials are currently explored as novel photothermal agents because of their ultrathin structure, high specific surface area, and unique optoelectronic properties. In addition to single photothermal therapy (PTT), 2D nanomaterials have demonstrated significant potential in PTT‐based synergistic therapies. In this Minireview, we summarize the recent progress in 2D nanomaterials for enhanced photothermal cancer therapy over the last five years. Their unique optical properties, typical synthesis methods, and surface modification are also covered. Emphasis is placed on their PTT and PTT‐synergized chemotherapy, photodynamic therapy, and immunotherapy. The major challenges of 2D photothermal agents are addressed and the promising prospects are also presented.     

基于常温无外压的转移印刷技术构筑半球状多级Ag基底

基于自组装技术制备了3种不同粒径的聚苯乙烯微球阵列,并翻制了与微球阵列互补的软模板.基于室温无外压的转移印刷技术制备了聚甲基丙烯酸甲酯半球形微纳阵列,然后基于原位光还原技术在聚甲基丙烯酸甲酯半球表面制备Ag纳米颗粒,构筑了拉曼增强的半球状多级Ag基底.转移印刷技术的关键是利用软模板自身的低表面能和表面羟基化的图案化材料与亲水基底界面间的氢键作用力.     

感应同步器鉴幅测角系统静态误差分析及关键电路设计

本文系统论述了采用感应同步器进行角位置测量的连续绕组激磁，分段绕组输出的鉴幅方案，对这个方案的工作原理进行介绍，并对此方案产生的静态误差进行分析，给出减小误差的方法，最后得出相关结论。