Synthesis and Spatiotemporal Modification of Biocompatible and Stimuli‐Responsive Carboxymethyl Cellulose Hydrogels Using Thiol‐Norbornene Chemistry

Carboxymethyl cellulose (CMC) is functionalized with norbornene groups to undergo thiol‐norbornene cross‐linking reactions. Hydrogels synthesized from a single norbornene‐modified carboxymethyl cellulose (NorCMC) via a light‐initiated thiol‐ene cross‐linking reaction with a variety of dithiol cross‐linkers yield hydrogels with a tunable compression modulus ranging from 1.7 to 103 kPa. Additionally, thermoresponsiveness is spatiotemporally imparted to NorCMC hydrogels by photopatterning a dithiol‐terminated poly(N‐isopropyl acrylamide) cross‐linker, enabling swelling and topological control of the hydrogels as a function of incubation temperature. NorCMC hydrogels are cytocompatible as the viability of encapsulated human mesenchymal stem cells (hMSCs) is greater than 85% after 21 d while using a variety of cross‐linkers. Moreover, hMSCs can remodel, adhere, and spread in the NorCMC matrix cross‐linked with a matrix metalloproteinase‐degradable peptide, further demonstrating the utility of these materials as a tunable biomaterial.     

Noncovalent binding interactions of polyacrylamide and clay in nanocomposite hydrogels

The interactions between organic and inorganic components in pregel solution for polyacrylamide (PAAm)/clay nanocomposite hydrogels (NC gels) and in prepared NC gels are investigated. Besides, a kind of self‐crosslinked PAAm gels with excellent mechanical properties is fabricated in the absence of any cross‐linking agents, the hydrogen bonding interactions among PAAm chains are acted as the cross‐linking force. It is revealed that the binding interactions of PAAm and clay in NC gels are owing to the noncovalent interactions between amide groups on PAAm chains and clay platelets, which afford the cross‐linking force for NC gels network formation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

pH/temperature double responsive behaviors and mechanical strength of laponite‐crosslinked poly(DEA‐co‐DMAEMA) nanocomposite hydrogels

A nanocomposite (NC) hydrogel crosslinked by inorganic Laponite XLG was successfully synthesized via in situ free radical polymerization of monomers N,N‐diethylacrylamide and (2‐dimethylamino) ethyl methacrylate (DMAEMA). Polymerization was carried out at room temperature due to the accelerating effect of DMAEMA. The as‐prepared hydrogels displayed controlled transformation in optical transmittance and volume in response to small diversification of environmental factors, such as temperature and pH. The compressive strength of swollen D_6:1G₆ hydrogels was as high as 2219 kPa while compressive strain was 95%. Cyclic compression measurement exhibited good elastic properties of NC hydrogels. This work provides a facile method for fabricating stimuli‐responsive hydrogels with superior mechanical property. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 876–884     

Hydrogel synthesis by aqueous Diels‐Alder reaction between furan modified methacrylate and polyetheramine‐based bismaleimides

A simple method for preparing cross‐linked hydrogels in an aqueous medium is investigated using Diels‐Alder (DA) “click” reaction, without employing a catalyst. A polymeric diene is first synthesized by the functionalization of poly(2‐aminoethyl methacrylate) hydrochloride with furfural. Suited bisdienophiles are prepared by modification of Jeffamine^® ED of different molecular weights with maleic anhydride. Both precursors of the DA coupling are thoroughly characterized before their reactions. The ensuing hydrogels are analyzed in terms of their microstructure, swelling, and rheological behavior, as a function of the reaction conditions. The influence of the molecular weight of the cross‐linker and the furan‐to‐maleimide ratio on the final properties of the hydrogels were also investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 699–708     

Atypical transition temperature dependence of poly(N‐isopropylacrylamide) and poly(N‐isopropylacrylamide‐co‐acrylamide) nanocomposites on the content of exfoliated montmorillonites

Exfoliated montmorillonite (MMT)/poly(N‐isopropylacrylamide) (PNIPAAm) and MMT/poly(N‐isopropylacrylamide‐co‐acrylamide) [P(NIPAAm‐co‐AAm)] nanocomposites were fabricated by soap‐free emulsion polymerization. Interestingly, as the content of MMT was increased from 0 to 10 wt %, the glass transition temperature of MMT/PNIPAAm was decreased from 145 to 122 °C, whereas that of the MMT/P(NIPAAm‐co‐AAm) increased from 95 to 153 °C. Although the lower critical solution temperature (LCST) of 32 °C for the MMT/PNIPAAm nanocomposites in aqueous solutions was slightly increased with the content of MMT, that of the MMT/P(NIPAAm‐co‐AAm) was decreased from 70 to 65 °C. A mechanism that the hydrogen bonds between the amide groups of PNIPAAm were interfered by the exfoliated MMT nano‐platelets for the MMT/PNIPAAm nanocomposites and the preferred absorption of acrylamide units to the MMT nanoplatelets rather than N‐isopropylacrylamide in the MMT/P(NIPAAm‐co‐AAm) nanocomposites was suggested to interpret these unusual transition behavior. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 524–530, 2009     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

Double-networks based on interconnected amphiphilic “in–out” star first polymer conetworks prepared by RAFT polymerization

Double-network hydrogels were prepared using well-defined first networks comprising interconnected amphiphilic “in-out” star copolymers synthesized via sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, and second networks based on a photopolymerized mixture of acrylamide and N,N′-methlyenebisacrylamide. All first and double-network hydrogels were characterized in terms of their aqueous degrees of swelling and mechanical properties in compression. The most hydrophobic first and double-network hydrogels exhibited the best mechanical properties, which may be attributed to their low aqueous swelling degrees and good mesoscale organization in water as revealed using small-angle neutron scattering (SANS) which showed that the size of the formed hydrophobic domains could be controlled by the polymer conetwork structure. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2161–2174     

Synthesis and functionalization of dendron‐polymer conjugate based hydrogels via sequential thiol‐ene “click” reactions

Fabrication and functionalization of hydrogels from well‐defined dendron‐polymer‐dendron conjugates is accomplished using sequential radical thiol‐ene “click” reactions. The dendron‐polymer conjugates were synthesized using an azide‐alkyne “click” reaction of alkene‐containing polyester dendrons bearing an alkyne group at their focal point with linear poly(ethylene glycol)‐bisazides. Thiol‐ene “click” reaction was used for crosslinking these alkene functionalized dendron‐polymer conjugates using a tetrathiol‐based crosslinker to provide clear and transparent hydrogels. Hydrogels with residual alkene groups at crosslinking sites were obtained by tuning the alkene‐thiol stoichiometry. The residual alkene groups allow efficient postfunctionalization of these hydrogel matrices with thiol‐containing molecules via a subsequent radical thiol‐ene reaction. The photochemical nature of radical thiol‐ene reaction was exploited to fabricate micropatterned hydrogels. Tunability of functionalization of these hydrogels, by varying dendron generation and polymer chain length was demonstrated by conjugation of a thiol‐containing fluorescent dye. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 926–934     

Effect of tensile load on the actuation performance of pH‐sensitive hydrogels

pH‐responsive hydrogels are capable of converting chemical energy to mechanical work. To optimize their use as actuators, their response when operating against an external load must be fully characterized. Here, the actuation strain of a model pH‐sensitive hydrogel as a function of different constant loads is studied. The experimental actuation strain, produced by switching the pH from 2 to 12, decreases significantly and monotonically with increasing initial tensile load. Two models are developed to predict the actuation strain as a function of applied stress. Simple mechanical models based on the change in hydrogel modulus and cross sectional area due to the change in pH are unsatisfactory as they predict only a small change in actuation strain with increasing external stress. However, the model based on the elastic and mixing free energy functions derived from the Flory–Huggins theory is found to accurately account for the actuation strain as a function of stress. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 218–225     

Pressure‐sensitive adhesive utilizing molecular interactions between thymine and adenine

A simple pressure‐sensitive adhesion (PSA) system incorporating noncovalent interaction between thymine and adenine is presented. A copolymer having thymine moieties is combined with a low‐molecular‐weight bifunctional adenine cross‐linker. Molecular interactions caused by multiple hydrogen bonds between the thymine and adenine units are evaluated by FT‐IR spectral measurement. Mechanical properties of the PSA are examined by stress–strain curves and dynamic mechanical analysis. As the number of adenine cross‐linkers increases, Young's modulus increases from 0.24 to 3.0 MPa, and the glass transition temperature increases. Furthermore, it is found that the PSAs have adequate adhesive property from their shear strength test. Heat treatment at 80 °C is effective for reinforcement because of interchange of the hydrogen bonds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1332‐1338     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)/poly(ethylene glycol) diacrylate hydrogels

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >C?C< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005     

Dynamic cross‐links to facilitate recyclable polybutadiene elastomer with excellent toughness and stretchability

A facile cross‐linking strategy of using small molecules as physcial crosslinkers to facilitate recyclable polybutadiene (PB) elastomer with excellent toughness and stretchability is demonstrated. Carboxylic acid groups were incorporated along the PB backbone via thiol‐ene reaction, and then the polymer can be cross‐linked by ionic hydrogen bonds between the carboxylic acid groups from PB and the amine groups of the cross‐linkers. The ionic hydrogen bonds can dynamiclly break and reconstruct upon deformation, thus endowing the resultant polymer with not only high toughness and stretchability (～1800%), but also good self‐recovery and enhanced damping properties. Remarkably, the dynamically cross‐linked PB elastomer can be thermally recycled owing to the thermal reversibility of the ionic hydrogen bonds and the mechanical properties can be largely recovered after reprocessing. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1357‐1366     

Extraordinary mechanical behavior of exfoliated montmorillonite/polymer nanocomposite films cast from soap‐free emulsion polymerized latices

The exfoliated montmorillonite (MMT) nanoplatelets tended to re‐stack with each other after casting the MMT/poly(methylacrylate‐co‐methylmethacrylate) P(MA‐co‐MMA) latex solutions fabricated by soap‐free emulsion polymerization into films as revealed by X‐ray diffraction and transmission electron microscopy. As the content of MMT was increased from 0 to 20 wt %, the T_g measured by differential scanning calorimetry was slightly decreased from 19.2 to 17.2 °C, whereas that measured by dynamic mechanical analysis was increased from 22 to 32 °C, indicating that the local motion of polymer segments has been retarded by MMT nanoplatelets. Besides, the elongated elliptical voids appeared during stretching of 1 wt % MMT/P(MA‐co‐MMA) film to cracking also illustrated the pinning effect provided by the exfoliated MMT. As the content of MMT was increased more than 10 wt %, the mechanical behavior of MMT/P(MA‐co‐MMA) nanocomposite films was changed from ductile to brittle nature with significant increase of Young's modulus and tensile strength owing to the restacking of exfoliated MMT nanoplatelets. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1064–1069, 2010     

Nanocomposite hydrogels: Fracture toughness and energy dissipation mechanisms

In this study, fracture toughness of nanocomposite hydrogels is quantified, and active mechanisms for dissipation of energy of nanocomposite hydrogels are ascertained. Poly(N,N‐dimethylacrylamide) nanocomposite hydrogels are prepared by in situ free radical polymerization with the incorporation of Laponite, a hectorite synthetic clay. Transmission electron microscopy proves exfoliation of clay platelets that serve as multifunctional crosslinkers in the created physical network. Extraordinary high fracture energies of up to 6800 J m^?2 are determined by the pure shear test approach, which shows that these soft and stretchable hydrogels are insensitive to notches. In contrast to single‐ and double‐network hydrogels, dynamic mechanic analysis and stress relaxation experiments clarify that significant viscoelastic dissipation occurs during deformation of nanocomposite hydrogels. Similar to double‐network hydrogels, crack tip blunting and plastic deformation also contribute to the observed massive fracture energies. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1763–1773     

Poly(2‐oxazoline) hydrogels crosslinked with aliphatic bis(2‐oxazoline)s: Properties,cytotoxicity, and cell cultivation

A series of hydrogels from 2‐ethyl‐2‐oxazoline and three bis(2‐oxazoline) crosslinkers—1,4‐butylene‐2,2′‐bis(2‐oxazoline), 1,6‐hexamethylene‐2,2′‐bis(2‐oxazoline), and 1,8‐octamethylene‐2,2′‐bis(2‐oxazoline)—are prepared. The hydrogels differ by the length of aliphatic chain of crosslinker and by the percentage of crosslinker (2–10%). The influence of the type and the percentage of the crosslinker on swelling properties, mechanical properties, and state of water is studied. The equilibrium swelling degree in water ranges from 2 to 20. With a proper selection of the crosslinker, Young's modulus can be varied from 10 kPa to almost 100 kPa. To evaluate the potential for medical applications, the cytotoxicity of extracts and the contact toxicity toward murine fibroblasts are measured. The hydrogels with the crosslinker containing a shorter aliphatic exhibit low toxicity toward fibroblast cells. Moreover, the viability and the proliferation of pancreatic β‐cells incubated inside hydrogels for 12 days are analyzed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1548–1559     

Ru(II)(tpy)2‐functionalized hydrogels: Synthesis,reversible responsiveness,and coupling with the belousov‐zhabotinsky reaction

This work aims at developing an approach to Ru(II)(Tpy)₂‐functionalized hydrogels and exploring the coupling of the hydrogels with the Belousov‐Zhabotinsky (BZ) reaction. Based on free radical polymerization, two synthetic routes are developed. The first one is the direct gelation by copolymerization of acrylamide as hydrophilic component and Ru(II)(Tpy)₂ as the functional group. The second one is carried out through a combined approach. A terpyridine‐containing hydrogel is first prepared and then post‐functionalized by coordination between Ru(III)(Tpy)Cl₃ and terpyridine groups in the hydrogel network. Utilizing the synthetic hydrogels, the reversible redox responsiveness, the coupling with the BZ reaction, the occurrence and the self‐oscillating properties of the BZ reaction in the hydrogel networks are studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2214–2222     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

Lactose‐containing hydrogels for enzyme stabilization

A lactose‐containing monomer, N‐(2‐lactosylethyl)acrylamide, was synthesized and polymerized with N‐hydroxyethyl acrylamide and 1 wt % of N, N'‐methylenebis(acrylamide) and potassium persulfate as the initiator to produce hydrogels. The weight percent of N‐(2‐lactosylethyl)acrylamide were increased from 0 to 100% in increments of 10%. Hydrogels were successfully produced with up to 90 wt % of N‐(2‐lactosylethyl)acrylamide. Gelation was confirmed by inverted vial tests and rheology measurements. The as‐prepared hydrogels were used for papain stabilization against heat burden and papain that was loaded into hydrogels showed 45% more activity after heating as compared to papain that was heated without hydrogel stabilization. This hydrogel stabilization technique has potential applications in preserving enzyme activity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2507–2514     

Synthesis of versatile poly(PMMA‐b‐VI) macromonomer‐based hydrogels via infrared laser ignited frontal polymerization

In this work, poly((PMMA‐b‐VI)‐co‐AA) (MMA = methyl methacrylate; VI = 1‐vinylimidazole; AA = acrylic acid) hydrogels and poly((PMMA‐b‐VI)‐co‐AA)/TPU (TPU = thermoplastic polyurethane) IPN (interpenetrating polymer networks) hydrogels have been fabricated via versatile infrared laser ignited frontal polymerization by using poly(PMMA‐b‐VI) macromonomer as the mononer. The frontal velocity and T_max (the highest temperature that the laser beam detected at a fixed point) can be adjusted by varying monomer weight ratios, the concentration of BPO (BPO = benzoyl peroxide) and the amount of TPU. Moreover, the addition of TPU enhances the reactant viscosity to suppress the “fingering” of frontal polymerization (FP) and decrease T_max of the reaction, providing a new inert carrier (TPU) to assist FP. Through the characterization of Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscope (SEM), and differential scanning calorimetry (DSC), the desired structure can be proved to exist in the IPN hydrogels. Furthermore, poly((PMMA‐b‐VI)‐co‐AA)/TPU IPN hydrogels possesses more excellent mechanical behaviors than hydrogels without IPN structure. Besides, the poly((PMMA‐b‐VI)‐co‐AA) hydrogels present splendid sensitive properties toward substances of different flavor including sourness (CA, citric acid or GA, gluconic acid), umami (SG, sodium glutamate), saltiness (SC, sodium chloride), sweetness (GLU, glucose), enabling their potential as artificial tongue‐like sensing materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1210–1221