Evaluation of Charged Defect Energy in Two-Dimensional Semiconductors for Nanoelectronics: The WLZ Extrapolation Method

Defects play a central role in controlling the electronic properties of two-dimensional (2D) materials and realizing the industrialization of 2D electronics. However, the evaluation of charged defects in 2D materials within first-principles calculation is very challenging and has triggered a recent development of the WLZ (Wang, Li, Zhang) extrapolation method. This method lays the foundation of the theoretical evaluation of energies of charged defects in 2D materials within the first-principles framework. Herein, the vital role of defects for advancing 2D electronics is discussed, followed by an introduction of the fundamentals of the WLZ extrapolation method. The ionization energies (IEs) obtained by this method for defects in various 2D semiconductors are then reviewed and summarized. Finally, the unique defect physics in 2D dimensions including the dielectric environment effects, defect ionization process, and carrier transport mechanism captured with the WLZ extrapolation method are presented. As an efficient and reasonable evaluation of charged defects in 2D materials for nanoelectronics and other emerging applications, this work can be of benefit to the community.     

用地面阵列寻找TeV能区γ点源的方法探讨

文中探讨搜寻TeV能区γ点源的方法.讨论利用student变量t判断来自源区及背景区宇宙线事例的统计差别,并由Bayes定理与MonteCarlo模拟相结合计算源区各能段的信号数,推算蟹状星云在TeV能区的γ射线微分能谱     

A Mossbauer study of the magnetic coupling in iron phosphorous trisulfides

The polycrystalline sample of layered compound FePS_3 has been investigated by using M?ssbauer spectroscopy (12K to 300K), magnetic susceptibility measurements, x-ray diffraction and FTIR spectroscopy. The antiferromagnetic order exists below T_N=120.5±1K. The M?ssbauer spectra below T_N indicate that the magnetization axis is perpendicular to the layer of FePS_3, and the divalent iron cations are in their high spin configurations. By fitting the hyperfine field parameters near the Néel temperature, we obtain information on the nature of magnetic interactions in the material. The results show that the magnetic coupling can be treated by the two-dimensional Ising model, and it can be interpreted on the basis of a crystal-field effect.     

溴原子取代对二茂铁液晶化合物介晶性的影响

二茂铁液晶因其独特的稳定性和易于衍生化受到研究人员的青睐[1- 8] 。我们曾经报道过一类单取代二茂铁液晶的合成与介晶性[9] 。这里我们报道另外一类二茂铁单取代液晶 ,并对分子的长度、溴原子取代对介晶性的影响进行探讨。合成路线如下 :1　实验部分ＢｒｕｃｋｅｒＡＣＥ -2 0 0ｓｐｅｃｔｒｏｍｅｔｅｒ,ＣＤＣｌ3作溶剂。ＮｉｃｏｌｅｔＭａｇｎａ-ＩＲ 5 0 0Ｓｐｅｃｔｒｏｍｅｔｅｒ,ＳｅｒｉｅｓⅡ ,ＫＢｒ压片。ＷＲＳ -ＩＡ ,ＣａｒｌｏＥｒｂａ 1 1 0ｂ。Ｐｅｒｋｉｎ -Ｅｌｍｅｒ 7Ｓｅｒｉｅｓ热分析仪 ,分温速度 1 0℃ /ｍｉ…     

CdSe纳米线阵列的制备及其表征(英)

通过在含有SeSO₃^2-和Cd²⁺的室温水溶液中，用模板-电沉积法在纳米孔阵列阳极氧化铝膜(AAM)模板中制备了高有序性的CdSe纳米线阵列，并对其形貌、结构和组分进行了表征。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明，纳米线阵列中的CdSe纳米线具有相同的长度和直径，分别对应于使用的AAM模板的厚度和孔径；X-射线衍射(XRD)和X-射线能谱(EDAX)结果表明，CdSe纳米线中Cd和Se的化学组成非常接近于1∶1，其结构为立方CdSe。另外，对模板-电沉积法制备CdSe纳米线的机理进行了讨论。     

ZrO2在Cu-ZnO-ZrO2甲醇水蒸汽重整制氢催化剂中的作用

通过对一系列Cu-ZnO-ZrO2甲醇水蒸汽重整(SRM)催化剂的XRD、TEM和BET表征及催化性能测定,研究催化剂中ZrO2对催化剂粒径、比表面以及对SRM反应性能的影响.结果表明,ZrO2的加入,使催化剂的粒径从15 nm降至10 nm（其中CuO和ZnO的平均粒径分别从7.7和10.4 nm降至3.9和8.7 nm）,BET比表面从60 m2•g－1增至78 m2•g－1.随着催化剂含ZrO2量不同,甲醇的转化率和H2、CO2的选择性均产生变化,当催化剂中Zr含量为24.0％(w),反应温度为220 ℃,水、醇摩尔比为1.3时,甲醇的转化率达到51.6％, H2和CO2的选择性达到100％(CO和CH4在产物气体中的体积分数小于10－4),这一结果对甲醇燃料电池甲醇重整器的应用具有重要的意义.     

The Effects of M2O3 on Stabilizing Monocopper over the Surface of Cu-ZnO-M2O3 Catalysts for Mathanol Synthesis

The effects of M₃O₃ (M = Al, Sc etc.) in Cu-ZnO-M₂O₃ catalysts on methanol synthesis at low pressure were studied with ESR, XPS and TPR spectroscopy. The results of ESR showed that the generation of monovalent cationic defects was because the valence state and electronic charge on the ZnO lattice lost their balance as M³⁺ doped into ZnO. The induced effect by Sc³⁺ is stronger than that by Al³⁺. The results of XPS and TPR indicated that the amount and stabilization of Cu⁺ on the surface of reduced copper-based catalyst and its catalytic activity were affected by the monovalent cationic defects on the surface of ZnO.     

Acridin-9-ylmethoxycarbonyl （Amoc）： A New Photochemically Removable Protecting Group for Alcohols

Synthesis and photochemistry of acridin-9-ylmethoxycarbonyl(Amoc)as a new photochemically removableprotecting group for alcohols were described.Three carbonates of alcohols 1—3 were synthesized throughcondensation of 9-hydroxymethylacridine and chloroformates of alcohols,including benzyl alcohol,phenethylalcohol and one galactose derivative.The photolysis of protected alcohols can efficiently release the correspondingalcohol in the efficiencies(Q_(u1)ε)of 100—200(quantum yield Q_(u1)=0.011—0.023,and molar absorptivity ε=9.1×10~3—9.8×10~3 mol~(-1)·L·cm~(-1))under 360 nm light.     

DNA为模板的铂纳米团簇沉积

Platinum nanoclusters were deposited along the supercoiled DNA strands after incubation of cis-(trans-1R，2R-diaminocyclohexane)(dl-camphorato)platinum(Ⅱ) (Cdp)， an analogue of the anti-tumor drug-carboplatin， with DNA and K₂PtCl₄ for 600 min and then through reduction of dimethylaminoborane (DMAB). The decrease of absorption of DNA at 260 nm indicates the coordination of Cdp and DNA. TEM and AFM were employed to characterize the morphologies and structures of platinum nanoclusters.     

Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

In this paper,large-sized sapphire (230×210 mm,27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching,scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101～8.0×102 cm-2,in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally,the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.