Two cubane-like [M4O4] {M = nickel(II), cobalt(II)} complexes: syntheses,crystal structures and magnetic properties

Transition Metal Chemistry - Two cubane-like complexes, namely [Ni4L4(HOEt)4] (1), [Co4L4(HOEt)4] (2) (H2L?=?(E)-2-((3-hydroxypropylimino)methyl)-6-methoxyphenol), were prepared under...     

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Ni–Co alloys have a wide range of applications in various fields owning to their excellent physical, chemical, and mechanical properties. In this paper, we prepare Ni–Co alloy coatings on 316L stain steel surfaces by electroplating. We present a novel approach utilizing a nanosecond laser to induce microtextures on Ni–Co alloy coatings. We study experimentally the effects of laser power and scanning rate on the surface morphologies of Ni–Co alloy coatings. The results indicate that the shape and size of induced microtextures can be controlled by the laser power and scanning rate. The size of grains increases with increase in the work current of the laser (WCL) at a certain scanning rate. With the WCL constant, the size of grains decreases with increase in scanning rate while their average height increases. It is a simple and easily-controlled method for the fabrication of microstructures on Ni–Co alloy coatings, which has promising applications in investigations of the properties of microtextured surfaces, such as friction, adhesion, and wetting.     

一类含参广义集值拟变分包含组的解的灵敏性分析

本文引入了一类新的含参广义集值拟变分包含组,应用隐预解算子技巧,建立了该类变分包含组与一类不动点问题的等价性,在适当的条件下,分析了含参广义集值拟变分包含组的解的灵敏性,所得结果推广改进了最新文献中的许多结果．     

Commuting and stable feedback design for switched linear systems

In the paper, commuting and stable feedback design for switched linear systems is investigated. This problem is formulated as to build up suitable state feedback controller for each subsystem such that the closed-loop systems are not only asymptotically stable but also commuting each other. A new concept, common admissible eigenvector set (CAES), is introduced to establish necessary/sufficient conditions for commuting and stable feedback controllers. For second-order systems, a necessary and sufficient condition is established. Moreover, a parametrization of the CAES is also obtained. The motivation comes from stabilization of switched linear systems which consist of a family of LTI systems and a switching law specifying the switching between them, where if all the subsystems are stable and commuting each other, then the total system is stable under arbitrary switching.     

两种方法制备ITO薄膜的红外特性分析

比较了用电束加热蒸发法和直流磁控溅射法制备的氧化锡铟(ITO)薄膜在红外波段的光学特性实验发现,通过直流磁控溅射在常温下制备的ITO薄膜在红外波段折射率稳定、消光系数小,比电子束加热蒸发制备的膜有较高的透过率在波长1550nm附近的透过率可达86%以上,消光系数约为004,方电阻最低为100Ω/□.     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

可调谐液晶法-珀滤光片的研究

提出了一种可用于密集波分复用系统中的新型可调谐滤光片的设计方法,该设计利用了液晶的双折射现象,以及液晶盒内法-珀效应,从理论上分析了器件的光谱特性,计算了液晶分子的折射率调制和其分子转动角度的关系.并对器件进行了性能测试.实验结果与理论吻合较好.     

苯对N,N-二甲基甲酰胺化合物~1H NMR的影响研究

本文研究了N,N-二甲基甲酰胺(DMF)在四氯化碳和苯混合溶剂中的~1H NMR。观察到N,N-二甲基甲酰胺(DMF)分子中两个甲基和混合溶剂中苯的共振吸收峰的化学位移随苯的摩尔分数增加而逐渐移向高场,而且两个甲基共振吸收峰向高场移动的程度不同,α甲基较β甲基为甚。DMF分子中两个甲基和混合溶剂中苯的化学位移可以用线性方程表示(δ=A+Bx),这里x是混合溶剂中苯的摩尔分数。相关系数R接近于-1。     

三维电子散斑干涉技术及其应用研究

通过大错位剪切镜和一作为参考物的压电陶瓷相移器将三个电子散斑干涉系统组成一新的三维电子散斑干涉系统。利用该系统，结合相移技术和图像处理技术，可得到独立的位移场(u,v和w场)。该技术的特点是用三个激光器作为光源，一个压电陶瓷相移器产生参考光并实现相移，CCD摄像机前放置大错位剪切镜以使物光和参考光产生干涉。将该技术应用到柴油发动机零部件测量上，得到了主轴承孔周的三维位移场。     

苯对N,N-二甲基甲酰胺化合物1H NMR的影响研究

本文研究了N,N-二甲基甲酰胺(DMF)在四氯化碳和苯混合溶剂中的¹H NMR。观察到N,N-二甲基甲酰胺(DMF)分子中两个甲基和混合溶剂中苯的共振吸收峰的化学位移随苯的摩尔分数增加而逐渐移向高场,而且两个甲基共振吸收峰向高场移动的程度不同,α甲基较β甲基为甚。DMF分子中两个甲基和混合溶剂中苯的化学位移可以用线性方程表示(δ=A+Bx),这里x是混合溶剂中苯的摩尔分数。相关系数R接近于-1。