Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Functionalization of saturated hydrocarbons. High temperature bromination of octahydropentalene. Part 19

The synthesis and thermal bromination of octahydropentalene was studied. The reaction afforded 1a,3a,4b,6b-tetrabromo-1,2,3,4,5,6-hexahydropentalene (14) with remarkable regio- and stereospecificity. The structure of the product was determined by ¹H and ¹³C NMR data and single X-ray structural analysis. The treatment of octahydropentalene with tenfold bromine gave the octabromopentalene derivative. The formation mechanism of the products is discussed.     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

Hydrogen bonding Part 20. Infrared study of the high temperature β-form of choline chloride

Infrared spectral studies of β-choline chloride at 95°C clearly demonstrate the presence of O---H … Cl hydrogen bonding. This observation contradicts an earlier conclusion, based on X-ray structural studies, that such hydrogen bonding could not occur in this high-temperature form of choline chloride. A moderate reinterpretation of the X-ray data may reconcile these contradictory conclusions. Unlike -choline chloride, β-choline chloride does not show C---H … Cl hydrogen bonding. It is possible that loss of C---H … Cl hydrogen bonding is a factor in the marked difference in radiation sensitivity of the - and β-forms.     

Synthesis and evaluations of bisphosphonate‐containing monomers for dental materials

Two new bismethacrylamide ( 1 , 2 ) and two new methacrylamide ( 3 , 4 ) dental monomers were synthesized. In each group, one monomer contains a bisphosphonate group, the other a bisphosphonic acid group. Monomer 1 and 3 were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride and methacryloyl chloride with tetraethyl aminomethyl‐bis(phosphonate) and converted to the bisphosphonic acid monomers 2 and 4 by hydrolysis with trimethylsilyl bromide. Monomer 1 (m.p.: 71–72 °C), monomer 3 ( 33–34 °C), and monomer 4 (no m.p.) were obtained as white solids and monomer 2 a viscous liquid, soluble in water. Homopolymerization of 1 gave crosslinked polymers, indicating its low cyclization tendency. The photopolymerization studies indicated that its copolymerizability with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane and 2‐hydroxyethyl methacrylate (HEMA) without changing their rates and conversions significantly means that it could be used as a biocompatible crosslinker. Although monomer 2 showed low polymerizability, because of its good performance in terms of solubility, hydrolytic stability, hydroxyapatite interaction, acidity, and copolymerizability with HEMA, it shows potential to be used in self‐etching dental adhesives. The thermal polymerization of 3 resulted in soluble polymers and evaluation of monomer 4 in terms of solubility, acidity, and copolymerizability with HEMA indicated its potential as an adhesive monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New chiral ruthenium(II)–phosphinite complexes containing a ferrocenyl group in enantioselective transfer hydrogenations of aromatic ketones

A new and versatile class of unsymmetrical ferrocenyl-phosphinite ligands possessing a stereogenic center has been prepared from commercially available, inexpensive aminoacids such as, d-, l-phenylglycine and d-, l-phenylalanine, through a concise synthetic procedure. These ligands are not very sensitive to air and moisture, and display good enantioselectivities in the ruthenium-catalyzed asymmetric transfer hydrogenation of acetophenone derivatives, in which up to 91% ee was obtained. A comparison of the catalytic properties of amino alcohols and other analogues based on a ferrocenyl backbone is also discussed briefly. The structures of these ligands and their corresponding complexes have been elucidated by a combination of multinuclear NMR spectroscopy, IR spectroscopy, and elemental analysis.     

Anodic Voltammetric Determination of an Atypical Antipsychotic Drug Amisulphide in Pharmaceutical Dosage Forms Using Electrochemical fsDNA Biosensor

Russian Journal of Electrochemistry - In this study, a new biosensor for amisulpride (ASP) determination is defined. The interaction between ASP and fish sperm double-stranded DNA (FSdsDNA) was...     

Enamines of 1,3-dimethylbarbiturates and their symmetrical palladium(II) complexes: synthesis,characterization and biological activity

Transition Metal Chemistry - Three 1,3-dimethylbarbiturate-enamine derivatives and their symmetrical palladium(II) complexes were prepared and characterized by spectroscopic methods. In addition,...     

Characterization and kinetics analysis of the thermal decomposition of the humic substance from hazelnut husk

A humic substance was obtained from hazelnut husk using an alkali extraction. The chemical and morphological structure of the humic matter was characterized via elemental analysis, Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance, Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), and thermogravimetric-FTIR (TG-FTIR). In addition, thermal analysis measurements TG analysis-differential thermogravimetry/differential scanning calorimetry (TGA-DTG/DSC) were performed under dynamic air conditions to better determine the origin, physical and chemical structure, and decomposition process of the humic matter. The Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were used to calculate the kinetic parameters of the high-temperature decomposition process. It was observed that the activation energy values were almost constant at certain conversion and temperature intervals. In addition, the structure of the humic substance at different temperatures was also investigated via FTIR analysis. It was found that the obtained humic substance had a very stable structure and decomposed at a high temperature. The stability of the humic matter can be a useful tool in the environmental quality research of soil.