用AD590自组数字温度计的设计实验

本介绍了用ADS90自组数字温度计实验，说明了实验步骤和数据处理等过程。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

稀土对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响

研究了稀土元素对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响. 结果表明: 与软氮化相比, 稀土软氮化提高了38CrMoAl钢的抗冲蚀磨损性能, 同时提高了软氮化层的硬度以及钢的冲击韧度. 由于软氮化时稀土的渗入, 改善了渗层组织, 从而提高了38CrMoAl钢的抗冲蚀磨损性能和机械性能. 扫描电子显微镜对冲蚀磨损试样表面形貌的观察发现, 普通软氮化层的磨损特征为塑性变形形成的犁沟剥落, 并伴随着萌生横向裂纹, 有大块磨屑剥落; 而稀土软氮化层则为塑性变形形成的犁沟剥落.     

Experimental study of photocatalytic oxidation of formaldehyde and its by-products

Formaldehyde is one of the most harmful pollutants that endanger occupants' health and the way of its effective removal has become a focus in the field of air quality. This paper studies the static photocatalytic removal of formaldehyde experimentally and finds out that carbon monoxide, which is more harmful to occupants' health than the formaldehyde itself, is one of the by-products in the process of photocatalytic oxidation of formaldehyde. The increase of carbon monoxide concentration should be taken into consideration in the photocatalytic application. The photocatalyst surface at room temperature can weakly adsorb CO and CO₂, which can deactivate the photocatalysts.     

套索冠醚毛细管色谱柱的研制

用套索冠醚N,N′-双(2-甲基吡啶)-二氮杂-18-冠-6作为固定相,涂渍在弹性石英毛细管内,测其柱效、惰性、热稳定性、平均极性及选择性等性质.其结构由元素分析、红外光谱、核磁共振及质谱分析的试验数据所证实.试验表明,它具有良好的色谱性能、中等极性,适用于对醇、卤代烃、芳香烃等各类异构体的分离,并用分子结构观点探讨了保留机理.     

Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine

Uniform-sized molecularly imprinted polymer (MIP) beads were prepared using a one-step swelling and polymerization method. The obtained sulfamethazine (SMZ)-imprinted polymer showed high affinity and selectivity toward SMZ and other structurally related sulfonamides in acetonitrile or water-acetonitrile mobile phases, particularly in high aqueous systems. The column performance of the MIPs for SMZ and its analogues could be improved by elevating the column temperature and optimizing the flow rate. The hydrogen-bonding effect plays a significant role in the recognition process of SMZ-imprinted polymer systems in organic media, while the ion-exchange effect, as well as hydrophobic effect, dominates the retention mechanism in aqueous-rich media, in addition to shape recognition.     

Molecular-scale drug delivery systems loaded with oxaliplatin for supramolecular chemotherapy

Smart strategies that can decrease the side effect and enhance the therapeutic efficacy of chemotherapy are in urgent need to meet the special demands of cance r therapy.Herein,two wate r-soluble macrocyclic hosts,i.e.,a carboxylated leaning tower[6]arene(CLT6) and a carboxylated [2]biphenyl-extended pillar[6]arene(CBpP6),are used to load chemotherapy drug oxaliplatin(OxPt) by forming inclusion complexes(OxPt■CLT6 and OxPt■CBpP6) through host-guest interactions.Interestingly,OxPt can be released from the macrocyclic cavities of these drug delivery systems(DDSs) via the competitive binding effect of spermine(SPM) because of the stronger binding abilities of CLT6/CBpP6 toward SPM as compared with OxPt,leading to enhanced cytotoxicity on SPM-overexpressed cancer cells,such as breast cancer MCF-7 cells.Moreover,compared to free OxPt,due to the low concentration of SPM in normal cells,OxPt■CGT6 and OxPt■CBpP6 demonstrated a decreased cytotoxicity on liver L02 cells,which is beneficial fo r reducing the side effect of anticancer drug during chemotherapy.Such a strategy might be extended to other antitumor drugs and water-soluble macrocycles with suitable cavity sizes to achieve controllable drug delivery and enhanced anticancer ability in supramolecular chemotherapy     

Electrocatalytic oxidation of formaldehyde and methanol on Ni(OH)2/Ni electrode

A nickel hydroxide-modified nickel electrode (Ni(OH)₂/Ni) was successfully prepared by the cyclic voltammetry (CV) method and the electrocatalytic properties of the electrode for formaldehyde and methanol oxidation have been investigated respectively. The Ni(OH)₂/Ni electrode exhibits high electrocatalytic activity in the reaction. A new method has been developed for formaldehyde determination at the nickel hydroxide-modified nickel electrode and the experimental parameters were optimized. The oxidation peak current is linearly proportional to the concentration of formaldehyde in the range of 7.0 × 10^?5 to 1.6 × 10^?2 M with a detection limit of 2.0 × 10^?5 M. Recoveries of artificial samples are between 93.3 and 103.5%. The effect of scan rate and methanol concentration on the electrochemical behavior of methanol were investigated respectively.