Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger

Journal of Thermal Analysis and Calorimetry - In recent decades, the growth of heat transfer using nanomaterials in the conventional base fluid has caught the attention of researchers...     

Large melting point depression of 2–3‐nm length‐scale nanocrystals formed by the self‐assembly of an associative polymer: Telechelic,pyrene‐labeled poly(dimethylsiloxane)

Large melting point depressions for organic nanocrystals, in comparison with those of the bulk, were observed in an associative polymer: telechelic, pyrene‐labeled poly(dimethylsiloxane) (Py‐PDMS‐Py). Nanocrystals formed within nanoaggregates of pyrenyl units that were immiscible in poly(dimethylsiloxane). For 5 and 7 kg/mol Py‐PDMS‐Py, physical gels resulted, with melting points exceeding 40 °C and with small‐angle X‐ray scattering peaks indicating that the crystals were nanoconfined, were 2–3 nm long, and contained roughly 18–30 pyrenyl dye end units. In contrast, 30 kg/mol Py‐PDMS‐PY was not a gel and exhibited no scattering peak at room temperature; however, after 12 h of annealing at ?5 °C, multiple melting peaks were present at 5–30 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3470–3475, 2004     

The effect of rapid rotation on a vertical bridgman furnace at large Rayleigh number

In quasi-steady operation, convection currents in a Bridgmandevice, used for producing a semi-conductor crystal, createinhomogeneities that may make the crystal unusable. It has oftenbeen suggested that additional forces due to rotation or magnetismmight be efficacious in reducing the segregation of the elementsof the alloy. It has been found that, over a wide range of rotationrates, there is no improvement in performance due to rotationabout the vertical axis. However, numerical results that havebeen obtained previously (Lee & Pearlstein, J. Crys. Growth240, 2002) indicate that, when effects of centrifugal buoyancyare introduced, a substantial reduction in segregation is achieved.In the work reported here, by contrast, in which we extend previouslarge-Rayleigh-number asymptotic analysis to include centrifugalbuoyancy, we find no improvement in radial segregation, butrather increasing segregation with increasing rotation rate.     

Preparation,properties and X-ray cystal structures of complexes of 4,4-diethylmorpholinium with 2,5-dibromo- and 2,5-dichloro-7,7,8,8-tetracyano-p-quinodimethane : DEM(TCNQBr2)2 and DEM-TCNQCl2

4,4-Diethylmorpholinium forms a 1:2 complex with 2,5-dibromo-TCNQ and a 1:1 complex with 2,5-dichloro-TCNQ; both are insulators at room temperature, and their single crystal $\text{X}$-ray structures have been determined at 293 K.     

Synthesis of new mono-functionalised tetrathiafulvalene derivatives by reactions of etrathiafulvalenyllithium with aldehydes and ketones: X-ray crystal structures of TTF-CMe(OH)Fc, TTF-CMe(OMe)Fc and TTF-CH(OMe)TTF (Fc = ferrocenyl)

Reactions of tetrathiafulvalenyllithium (TTF-Li) with a range of aldehydes and ketones have been explored for the first time, to provide an efficient route to mono-functionalised TTF derivatives of general formulae TTF-CH(OH)R (R = alkyl, phenyl, tetrathiafulvalenyl and ferrocenyl) and TTF-CR(OH)R′ (R = alkyl, phenyl, R′ = alkyl, phenyl, tetrathiafulvalenyl, ferrocenyl, and R-R′ = fluorenyl). Subsequent transformations involving the reactive alcohol group of some of these compounds are reported. The structures of the three title compounds have been established by single-crystal X-ray analysis.     

Synthesis and trapping of transient 1,2-diselones to yield 1,4-diselenin derivatives: calculated structures of 1,2-diselones, 1,2-diselenetes and their sulfur analogues

Two conceptually different routes to transient 1,2-diselones are reported: 1) via ring fragmentation of the 1,4,2-diselenazine system 6, and 2) by the tributylphosphane-induced depolymerisation of the shelf-stable organoselenium polymer 15. Evidence for the intermediacy of 1,2-diselone species 7 and 16 is provided in both cases by in situ trapping with dimethyl acetylenedicarboxylate (DMAD) to yield 1,4-diselenin derivatives. The route via 15 is especially expedient and trapping of 16 is efficient. Subsequent reactions of adduct 17 afford [1,2-ethanediylbis(diphenylphosphane)] [5,6-bis(methoxycarbonyl)-1,4-diselenin-2,3-dithiolato]nickel(IV) (20). Theoretical calculations at Hartree-Fock (HF) and Moller-Plesset electron-correlated levels (MP2) suggest that the cyclic 1,2-diselenete structure 7c is significantly more stable than the acyclic 1,2-diselone structure 7a. For the bicyclic system 16, the difference in energy between the cyclic and acyclic structures is considerably reduced due to the conformational rigidity imposed by the fused 1,3-dithiole ring. In contrast, the acyclic structures of the 1,2-dithione analogues 13a and 25a are computed to be more stable than their corresponding cyclic 1,2-dithiete structures 13c and 25c.     

Functionalized pyridylboronic acids and their Suzuki cross-coupling reactions to yield novel heteroarylpyridines

2-Bromo-5-pyridylboronic acid 2a, 2-chloro-5-pyridylboronic acid 2b, 2-methoxy-5-pyridylboronic acid 2c, and 5-chloro-2-methoxy-4-pyridylboronic acid 4 have been synthesized and shown to undergo palladium-catalyzed cross-coupling reactions with heteroaryl bromides to yield novel heteroarylpyridine derivatives. The X-ray crystal structures of 2a and 2b have been obtained.     

A simple and versatile method for the synthesis of acetals from aldehydes and ketones using bismuth triflate

Acetals are obtained in good yields by treatment of aldehydes and ketones with trialkyl orthoformate and the corresponding alcohol in the presence of 0.1 mol % Bi(OTf)3.4H2O. A simple procedure for the formation of acetals of diaryl ketones has also been developed. The conversion of carbonyl compounds to the corresponding 1,3-dioxolane using ethylene glycol is also catalyzed by Bi(OTf)3.4H2O (1 mol %). Two methods, both of which avoid the use of benzene, have been developed.     

5-Pyrimidylboronic acid and 2-methoxy-5-pyrimidylboronic acid: new heteroarylpyrimidine derivatives via Suzuki cross-coupling reactions

5-Pyrimidylboronic acid and 2-methoxy-5-pyrimidylboronic acid 4 have been synthesised by lithium-halogen exchange reactions on 5-bromopyrimidine and 2-methoxy-5-bromopyrimidine, respectively, followed by reaction with triisopropylborate. Suzuki cross-coupling reactions of 2 and 4 with heteroaryl halides [Na(2)CO(3), Pd(PPh(3))(2)Cl(2), 1,4-dioxane, 95 degrees C] yield heteroarylpyrimidines (heteroaryl = thienyl, quinolyl and pyrimidyl). Two-fold reaction of 2 with 4,6-dichloropyrimidine 12 gave 4,6-bis(5-pyrimidyl)pyrimidine 8(56% yield). Reaction of 4,6-dichloropyrimidine with 2-methoxy-5-pyridylboronic acid gave 4,6-bis(2-methoxy-5-pyridyl)pyrimidine 14 (84% yield). Conversion of into 4,6-bis(2-chloro-5-pyridyl)pyrimidine 15 (63% yield) followed by two-fold Suzuki reaction with 4-tert-butylbenzeneboronic acid gave the penta-arylene derivative 4,6-bis[2-(4-tert-butyl)phenyl-5-pyridyl]pyrimidine 16 (16% yield). Analogous reaction of 12 with 2-methoxy-3-pyridylboronic acid 17 gave 4,6-bis(2-methoxy-3-pyridyl)pyrimidine 18 (64% yield). The X-ray crystal structures of compound 2.0.5H(2)O and compound 18 are reported. The two hydroxyl H atoms in 2 have the usual exo-endo orientation. However, unlike most arylboronic acids, molecule 2 does not form a centrosymmetric hydrogen-bonded dimer. In molecule 18, the pyridine rings form dihedral angles of 39.9 degrees and 22.8 degrees with the central pyrimidine ring.