Cover Feature: How Many O-Donor Groups in Enterobactin Does It Take to Bind a Metal Cation? (Chem. Eur. J. 28/2019)

The E. coli siderophore enterobactin, the strongest Fe^III chelator known to date, forms hexacoordinate complexes with Si^IV, Ge^IV, and Ti^IV. Synthetic protocols have been developed to prepare non-symmetric enterobactin analogues with varying denticities. Various benzoic acid residues were coupled to the macrocyclic lactone to afford a diverse library of ligands. These enterobactin analogues were bound to Si^IV, Ge^IV, and Ti^IV, and the complexes were investigated through experimental and computational techniques. The binding behavior of the synthesized chelators enabled assessment of the contribution of each of the phenolic hydroxy groups in enterobactin to metal-ion complexation. It was found that at least four O-donors are needed for enterobactin derivatives to act as metal binders. Density functional theory calculations indicate that the strong binding behavior of enterobactin can be ascribed to a diminished translational entropy penalty, a common feature of the chelate effect, coupled with the structural arrangement of the three catechol moieties, which allows the triseryl base to be installed without distorting the preferred local metal-binding geometry of the catecholate ligands.     

Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported copper and manganese phthalocyanines in alkaline media

Manganese phthalocyanine (MnPc) and copper phthalocyanine (CuPc)-modified electrodes were prepared using multi-walled carbon nanotubes (MWCNTs) as a support material. The catalyst materials were heat treated at four different temperatures to investigate the effect of pyrolysis on the oxygen reduction reaction (ORR) activity of these electrocatalysts. The MWCNT to metal phthalocyanine ratio was varied. Scanning electron microscopy (SEM) was employed to visualise the surface morphology of the electrodes and the x-ray photoelectron spectroscopic (XPS) study was carried out to analyse the surface composition of the most active catalyst materials. The ORR was studied in 0.1 M KOH solution employing the rotating disk electrode (RDE) method. Glassy carbon (GC) electrodes were modified with carbon nanotube-supported metal phthalocyanine catalysts using Tokuyama AS-4 ionomer. The RDE results revealed that the highest electrocatalytic activity for ORR was achieved upon heat treatment at 800 °C. CuPc-derived catalyst demonstrated lower catalytic activity as compared to the MnPc-derived counterpart, which is in good agreement with previous literature, whereas the activity of MnPc-based catalyst was higher than that reported earlier.     

Modeling ExB drift transport in conceptual slot divertor configurations

At DIII-D, a slot divertor concept, called small-angle-slot (SAS), is under development, aiming to enable detachment at relatively low plasma edge density. We report on simulations using the SOLPS-ITER two-dimensional edge code to examine the performance of conceptual “SAS 2” slot configurations. The focus of the analysis is on E  ×  B drift effects on upstream density at detachment (UDD), with detachment marked by electron temperature T_e ≤ 3 eV at the outer strike point (OSP). With toroidal field such that radial E  ×  B drift carries particles from the OSP towards the private flux region (PFR), placing the OSP near the inner slot wall gives ≈20% lower UDD than having the OSP near the outer wall. The inner wall effectively traps the radial E  ×  B drift flux, resulting in low T_e and associated radial electric field in the PFR, and thus small losses from the slot to the inner target via poloidal E  ×  B drift flux. With toroidal field reversed such that radial E  ×  B drift is reversed, OSP placement near the inner wall gives ≈10% lower UDD than OSP placement near the outer wall. Although radial E  ×  B flux is from the OSP towards the outer wall, this flux largely escapes the slot, raising the UDD. A change in the slot shaping is suggested with the goal of eliminating such E  ×  B -driven particle losses from the slot.     

Investigations on Novel 1,3-Diazetidine Based Four-Membered N-Heterocyclic Carbenes

Attempts towards the synthesis of two novel four-membered 1,3-diazetidine based N-heterocyclic carbenes (NHCs) containing an organic backbone with a carbonyl functionality were undertaken. These carbenes cannot be isolated but the respective carbene dimers are obtained in quantitative yield which undergo a degradation and rearrangement sequence upon thermal exposure. Some of the species involved in these thermal reactions could be isolated and characterized, others were observed by mass spectrometric experiments. Ab initio and density functional theory (DFT) calculations provide a mechanistic rationale for the experimental observations. Since dimerization is strongly favored, classic carbene trapping reactions remain a goal to achieve.     

Morphology,structure, and photoactivity of two types of graphene oxide-TiO<Subscript>2</Subscript> composites

Two types of graphene oxide-TiO₂ composites were prepared: one by including graphene oxide flakes in the TiO₂ sol, followed by thermal treatment (GI composite) at 300°C, and the second by including graphene oxide flakes in the calcined (at 500°C) TiO₂ xerogel (GII composite). The composites were characterized by SEM, TEM-EDS, TEM-SADP, STEM-HAADF, HRTEM coupled with FT, XRD, and XPS. Photocatalysis results were fitted to different kinetic models (pseudo-first and pseudo-second kinetics, intraparticle Weber-Morris diffusion, film diffusion, and external mass transfer). The results showed that by introducing graphene oxide flakes in the TiO₂ sol, followed by thermal treatment at 300°C (GI composite), an efficient graphene oxide-TiO₂ catalyst with high specific surface area, heterogeneity, and many graphitized areas can be obtained. Complete crystallization of the composite is not the key issue for the best photoactivity achievement. The rate limiting step in the photocatalytic process is the photooxidation of SA molecules on the TiO₂ surface.     

Examination of Selectivities of Thermally Stable Geminal Dicationic Ionic Liquids by Structural Modification

Dicationic ionic liquids (ILs) are widely used as gas chromatography (GC) stationary phases as they show higher thermal stabilities, variety of polarities, and unique selectivities towards certain compounds. An important aspect contributing to them is that they show multiple solvation interactions compared to the traditional GC stationary phases. Dicationic ILs are considered as combination of three structural moieties: (1) cationic head groups; (2) a linkage chain; and (3) the counter anions. Modifications in these structural moieties can alter the chromatographic properties of IL stationary phases. In this study, a series of nine thermally stable IL stationary phases were synthesized by the combination of five different cations, two different linkage chains, and two different anions. Different test mixtures composed of a variety of compounds having different functional groups and polarities were analyzed on these columns. A comparison of the separation patterns of these different compounds on nine different IL columns provided some insights about the effects of structural modifications on the selectivities and polarities of dicationic ILs.     

Are there reliable DFT approaches for 13C NMR chemical shift predictions of fullerene C60 derivatives?

The relationships between experimental and theoretical ¹³C NMR chemical shifts of a pristine fullerene C₆₀, monoadducts from [2 + n] cycloaddition (n = 1–3), and one [2 + 1] bis‐adduct are systematically analyzed for the first time by using diverse quantum‐chemical levels of theory. These levels involved B3LYP, B3PW91, B97‐2, mPW1PW91, PBE1PBE, and X3LYP hybrid functionals combined with 3‐21G, 6‐31G, 6‐31G(d), 6‐31G(d,p), 6‐31G(d,2p), LanL2DZ, and SDDAll basis sets. X3LYP/6‐31G approach is determined to have the lowest deviations from the ¹³C NMR experimental data compared to the other methods for all the fullerene compounds (mean absolute error value is 0.856 ppm and root mean squared error value is 1.197 ppm). The highest deviations are characteristic for α (sp² C2/C5/C8/C10) and β (sp² C6/C7/C11/C12) carbon atoms relative to a functionalization site and for those (sp³ C1/C9) directly attached with a side fragment in the [2 + n] monoadducts (n = 1–3). A probable reason of such deviation is that the approaches do not take into account a contribution of paramagnetic ring currents to ¹³C NMR chemical shifts. The results will be useful in design of novel fullerene derivatives and in performing unambiguous ¹³C NMR chemical shift assignments with modern quantum chemistry calculations.     

Growth and Atomic-Scale Characterization of Ultrathin Silica and Germania Films: The Crucial Role of the Metal Support

The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO₄ (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.