The Processing of Pyrolysis Fuel Oil by Dielectric Barrier Discharge Plasma Torch

In present paper, an atmospheric-pressure low-temperature plasma treatment of pyrolysis fuel oil (PFO) was investigated in dielectric barrier discharge plasma torch reactor. The effect of the applied voltage and the volume of feedstock, as the main parameters, on the cracking of PFO were studied. By increasing the applied voltage from 10 to 16 kV, the production rate of hydrocarbons containing methane, ethylene, acetylene, propane, propylene, and C₄ rise 18 times. In this case, the production rate of hydrogen increases by approximately 14 times and reaches 7.27 × 10^?3 mol/min for 16 kV. In the feedstock volume investigation, based on limitation of reactor volume, the production rate of hydrocarbons decreased from 0.44 × 10^?3 to 0.15 × 10^?3 mol/min by increasing volume of feedstock from 1 to 5 cc.     

Determinaton of trace amounts of titanium by flame atomic absorption spectrometry after cloud point extraction

In this work a cloud-point extraction has been used for the preconcentration of the trace amounts of titanium after complex formation with morin (2′,3,4′,5,7-pentahydroxyflavone) using Triton X-114 as surfactant. The chemical variables affecting the phase separation and the viscosity affecting the detection by flame atomic absorption spectrometry (FAAS) were optimized. At pH 4.5, preconcentration of 50 mL of sample in the presence of 0.08% Triton X-114 and 1.0 × 10^?4 M morin enabled the detection limit (c _L = 3S _b/m) of 2.9 ng/mL titanium and linear range 0.02–2.0 μg/mL to be achived. The preconcentration factor was 61, and the relative standard deviation was 3.8% for 0.1 μg/mL solution of Ti(IV) by repeated assays (n = 9). The proposed method has been applied to the determination of titanium in well water, spiked water and plant (Haloxylon).     

Rapid and Facile Access to Indeno[1,2‐d]imidazoles via a Tandem Addition?Cyclization Reaction

A novel and tandem synthesis of highly functionalized tetrahydroindeno[1,2‐d]imidazole is described. A one‐pot reaction between a primary amine, an aryl isothiocyanate, and ninhydrin leads to highly substituted indeno[1,2‐d]imidazoles under solvent‐free conditions in excellent yields (Scheme). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Vibrational assignment, structure and intramolecular hydrogen bond study of 3-amino-1-phenyl-2-buten-1-one

Fourier transform infrared and Fourier transform Raman spectra of 3-amino-1-phenyl-2-buten-1-one and its deuterated analogue were recorded in the regions 400-4,000 and 150-4,000 cm(-1), respectively. Furthermore, the molecular structure and vibrational frequencies of title compound were investigated by a series of density functional theoretical, DFT, and ab initio calculations at the post-Hartree-Fock (MP2) level. Although, the calculated frequencies are generally in agreement with the observed spectra but the DFT results are in much better quantitative agreement with the observed spectra than the MP2 results. The observed wavenumbers were analyzed and assigned to different normal modes of vibration of the molecule. The calculated geometrical parameters show a strong intramolecular hydrogen bond with a N...O distance of 2.621-2.668 A. This bond length is shorter than that of its parent, 4-amino-3-penten-2-one (with two methyl groups in the beta-position), which is in agreement with spectroscopic results. The topological properties of the electron density contributions for intramolecular hydrogen bond in 3-amino-1-phenyl-2-buten-1-one and 4-amino-3-penten-2-one have been analyzed in term of the Bader theory of atoms in molecules (AIM). These results also support the stronger hydrogen bond in the title compound with respect to the parent molecule.     

Investigation of electrostatic charge distribution within the reactor wall fouling and bulk regions of a gas–solid fluidized bed

The distribution of charge within the wall fouling region and bulk of a fluidized bed reactor was investigated. Experiments were conducted in a 0.1 m in diameter carbon steel fluidization column under atmospheric conditions. Polyethylene particles were fluidized with extra dry air at 1.5 the minimum fluidization velocity (bubbling flow regime) for 1 h. Using an online Faraday cup measurement technique, the net charge-to-mass ratio (q/m), as well as the size distribution of all particles adhered to the column wall and those in the bulk of the bed was determined. The wall particles were found to be predominantly negatively charged while those which did not adhere to the wall were predominantly positively charged. The charge distribution within each region was then investigated by a custom made charged particle separator that separated the particles according to their charge magnitude and polarity. It was determined that although the net charge of the wall layer particles was negative, a significant amount of positively charged particles existed within each sample and therefore the entire wall particle layer. This suggests that the wall layer was formed through layering between positively and negatively charged particles. Particles in the bulk of the bed also consisted of bipolarly charged particles.     

Loop Erbium-Doped Fiber Amplifiers

A comprehensive study of implementing erbium-doped fiber amplifiers (EDFAs) using a loop configuration is presented. Two different schemes based on the mechanism of directing the loop output are investigated. The amplified spontaneous emission at the output port is 3 dB lower than conventional designs. This configuration is recommended for high-power EDFAs.     

One‐Pot Synthesis of 4‐(Alkylamino)‐1‐(arylsulfonyl)‐3‐benzoyl‐1,5‐ dihydro‐5‐hydroxy‐5‐phenyl‐2H‐pyrrol‐2‐ones via a Multicomponent Reaction

An effective route to novel 4‐(alkylamino)‐1‐(arylsulfonyl)‐3‐benzoyl‐1,5‐dihydro‐5‐hydroxy‐5‐phenyl‐2H‐pyrrol‐2‐ones 10 is described (Scheme 2). This involves the reaction of an enamine, derived from the addition of a primary amine 5 to 1,4‐diphenylbut‐2‐yne‐1,4‐dione, with an arenesulfonyl isocyanate 7 . Some of these pyrrolones 10 exhibit a dynamic NMR behavior in solution because of restricted rotation around the C? N bond resulting from conjugation of the side‐chain N‐atom with the adjacent α,β‐unsaturated ketone group, and two rotamers are in equilibrium with each other in solution ( 10 ? 11 ; Scheme 3). The structures of the highly functionalized compounds 10 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS), by elemental analyses, and, in the case of 10a , by X‐ray crystallography. A plausible mechanism for the reaction is proposed (Scheme 4).     

Amine‐Promoted One‐Pot,Multicomponent Route to Spiro‐Fused‐Pyran Derivatives in Aqueous Media

The primary amine‐promoted synthesis of spiro‐fused‐pyran derivatives via the three‐component reaction of ninhydrin, malononitrile, and cyclic 1,3‐diketo compounds is described. This new methodology affords the title compounds in high yields and short time, and with easy workup without chromatographic purification steps or extraction. All structures were confirmed by IR, ¹H‐ and ¹³C‐NMR spectroscopy, and mass spectroscopy. A plausible mechanism for this type of reaction is proposed (Scheme 2).     

One-pot synthesis of 4,5-dihydro-1H-pyrrol-3-carboxamide derivatives via a four-component reaction

An effective route to functionalized 4,5-dihydro-1H-pyrrol-3-carboxamide derivatives is described. This involves reaction of N-alkyl-3-oxobutanamides, which result from the addition of an amine to the diketene, and a primary amine in the presence of dibenzoylacetylene. The 1,3-dicarbonyl compounds obtained from the addition of an amine to diketene were trapped with a primary amine to produce (Z)-3-(alkylamino)-N¹-alkyl-2-butenamide, which reacts with dibenzoylacetylene to produce 4,5-dihydro-1H-pyrrol-3-carboxamide derivatives.