In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).     

Role of vitreous matrix on the optical activity of Ge-doped silica

We report an experimental study on the relationship between the optical activity of Ge-oxygen deficient centers and dynamic properties and conformational heterogeneity of vitreous matrix in silica. We focus our attention on the absorption band at ∼5.2 eV (B_2β) and on the two related emissions at ∼4.2 eV (α_E) and at ∼3.1 eV (β). From the temperature dependence of B_2β band we estimate a mean energy value of 26 meV for local vibrational modes coupled to the electronic transition, suggesting that the chromophore and its surrounding have access to low frequency dynamics. From the thermal behavior of the two emissions we distinguish the two competitive relaxation processes from the first singlet excited state S₁: the radiative one, giving rise the α_E band, and the thermally activated intersystem-crossing process between S₁ and the triplet state T₁, originating the β band. The intersystem-crossing rate increases on increasing the temperature, determining an opposite thermal behavior of the intensity of the two emissions. However, this temperature dependence cannot be rationalized by a simple Arrhenius law and the α_E decay kinetics at high temperatures do not follow a single exponential law, suggesting a complex landscape of configurational energies of the process.     

Error bounds for strongly convex programs and (super)linearly convergent iterative schemes for the least 2-norm solution of linear programs

Given an arbitrary point (x, u) inR ⁿ × R ₊ ^m , we give bounds on the Euclidean distance betweenx and the unique solution to a strongly convex program in terms of the violations of the Karush-Kuhn-Tucker conditions by the arbitrary point (x, u). These bounds are then used to derive linearly and superlinearly convergent iterative schemes for obtaining the unique least 2-norm solution of a linear program. These schemes can be used effectively in conjunction with the successive overrelaxation (SOR) methods for solving very large sparse linear programs.Sponsored by the United States Army under Contract No. DAAG29-80-C-0041. This material is based on research sponsored by National Science Foundation Grant No. DCR-8420963 and Air Force Office of Scientific Research Grant No. AFOSR-ISSA-85-00080.On leave from CRAI, via Bernini 5, Rende, Cosenza, Italy.     

The projection operator approach to the Fokker-Planck equation. II. Dichotomic and nonlinear Gaussian noise

Two models for the Freedericksz transition in a fluctuating magnetic field are considered: one is based on a dichotomic and the other on a nonlinear Gaussian noise. Both noises are characterized by a finite correlation time. It is shown that the linear response assumption leading to the best Fokker-Planck approximation in the dichotomic and nonlinear Gaussian cases can be trusted only up to the order ¹ and ⁰, respectively. The role of the corrections to the linear response approximation is discussed and it is shown how to replace the non-Fokker-Planck terms stemming from these corrections with equivalent terms of standard type. This technique is shown to produce perfect agreement with the exact analytical results (dichotomic noise) and to satisfactorily fit the results of analog simulation (nonlinear Gaussian noise).     

The projection approach to the Fokker-Planck equation. I. Colored Gaussian noise

It is shown that the Fokker-Planck operator can be derived via a projection-perturbation approach, using the repartition of a more detailed operator into a perturbation ₁ and an unperturbed part ₀. The standard Fokker-Planck structure is recovered at the second order in ₁, whereas the perturbation terms of higher order are shown to provoke the breakdown of this structure. To get rid of these higher order terms, a key approximation, local linearization (LL), is made. In general, to evaluate at the second order in ₁ the exact expression of the diffusion coefficient which simulates the influence of a Gaussian noise with a finite correlation time, a resummation up to infinite order in must be carried out, leading to what other authors call the best Fokker-Planck approximation (BFPA). It is shown that, due to the role of terms of higher order in ₁, the BFPA leads to predictions on the equilibrium distributions that are reliable only up to the first order in t. The LL, on the contrary, in addition to making the influence of terms of higher order in ₁ vanish, results in a simple analytical expression for the term of second order that is formally coincident with the complete resummation over all the orders in t provided by the Fox theory. The corresponding diffusion coefficient in turn is shown to lead in the limiting case to exact results for the steady-state distributions. Therefore, over the whole range 0 the LL turns out to be an approximation much more accurate than the global linearization proposed by other authors for the same purpose of making the terms of higher order in ₁ vanish. In the short- region the LL leads to results virtually coincident with those of the BFPA. In the large- region the LL is a more accurate approximation than the BFPA itself. These theoretical arguments are supported by the results of both analog and digital simulation.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%).     

A new approach to phosphoserine and phosphothreonine analysis in peptides and proteins: chemical modification,enrichment via solid-phase reversible binding,and analysis by mass spectrometry

beta-Elimination of the phosphate group on phosphoserine and phosphothreonine residues and addition of an alkyldithiol is a useful tool for analysis of the phosphorylation states of proteins and peptides. We have explored the influence of several conditions on the efficiency of this PO(4)(3-) elimination reaction upon addition of propanedithiol. In addition to the described influence of different bases, the solvent composition was also found to have a major effect on the yield of the reaction. In particular, an increase in the percentage of DMSO enhances the conversion rate, whereas a higher amount of protic polar solvents, such as water or isopropanol, induces the opposite effect. We have also developed a protocol for enrichment of the modified peptides, which is based on solid-phase covalent capture/release with a dithiopyridino-resin. The procedure for beta-elimination and isolation of phosphorylated peptides by solid-phase capture/release was developed with commercially available alpha-casein. Enriched peptide fragments were characterized by MALDI-TOF mass spectrometric analysis before and after alkylation with iodoacetamide, which allowed rapid confirmation of the purposely introduced thiol moiety. Sensitivity studies, carried out in order to determine the detection limit, demonstrated that samples could be detected even in the low picomolar range by mass spectrometry. The developed solid-phase enrichment procedure based on reversible covalent binding of the modified peptides is more effective and significantly simpler than methods based on the interaction between biotin and avidin, which require additional steps such as tagging the modified peptides and work-up of the samples prior to the affinity capture step.     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.