Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nano-powders dispersed in oil

Journal of Thermal Analysis and Calorimetry - Artificial neural network/kriging interpolation method optimization method which is evaluated concerned the hybrid nanofluid composed of iron oxide...     

A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Vieta–Fibonacci wavelets: Application in solving fractional pantograph equations

In this paper, the Vieta–Fibonacci wavelets as a new family of orthonormal wavelets are generated. An operational matrix concerning fractional integration of these wavelets is extracted. A numerical scheme is established based on these wavelets and their fractional integral matrix together with the collocation technique to solve fractional pantograph equations. The presented method reduces solving the problem under study into solving a system of algebraic equations. Several examples are provided to show the accuracy of the method.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Silica-Polyethyleneglycols/N 2 O 4 Complexes as Heterogeneous Nitrating and Nitrosating Agents

Silica-chloride was reacted with different quantities of H(OCH 2 CH 2 ) n OH (n = 2-4) to furnish silica-based linear polyethylene glycols and cyclic polyethylene glycolic ethers. The N 2 O 4 complex of silica-tetraethylene glycolic ether ( III ) was selected and used as a stable, cheap, and heterogeneous silica-based reagent for the selective mono- and dinitration of phenols and nitrosation of thiols.     

Effect of the External Mirror Feedback Strength in the Dynamics and Spectrum of the Injected Semiconductor Lasers

We analytically investigate the effect of an external mirror on the stability of an injected semiconductor laser, the latter treated as injected damped oscillators. In the studied configuration, the injected semiconductor laser with an external mirror is under the influence of a chaotic oscillating optical signal that is generated by a similar semiconductor master laser. We derive our results in terms of the damping rate and resonance frequency. We show that the external mirror can eliminate the unstable modes of the injected laser at low frequencies. Furthermore, the mirror can enhance the damping of the oscillation modes of the injected semiconductor laser; consequently, the driven response of the injected laser may have a broad spectrum, even wider than that of the chaotic driving signal. We also show results for the bandwidths of the injection amplitude and phase increment as functions of the injection rate and feedback strength of the external mirror. In addition, we use bifurcation and time-series curves to describe the dynamical behavior of the injected laser. We identify the feedback strength of injected laser, relative to that of the master laser, which induces synchronization between the injected-laser oscillation modes and the master laser.     

Zn and Zr co-doped M-type strontium hexaferrite: Synthesis,characterization and hyperthermia application

In the present study, hard ferromagnetic (M-type strontium hexaferrite) SrFe₁₂O₁₉ was co-doped by Zn and Zr for magnetic hyperthermia applications. As a result of the high concentration of single domain SrFe₁₂O₁₉ nanoparticles (suspended in the ferrofluid), they found a large hydrodynamic diameter, which caused a long-time Brownian relaxation under the AC magnetic field. On the other hand, increasing the Zn-Zr content (low concentration of SrFe₁₂O₁₉) led to a drop in anisotropy, which coincided with a short-time N´eel relaxation. All of the substituted samples with a multi-disperse state in ferrofluid exhibited an almost equal amount of the N´eel and Brownian effects. Consequently, the magnetic saturation (M_s) was considered as the dominant factor in the specific absorption rate (SAR) of the substituted samples. Transformation to the mono-disperse state was followed by the decrease of the Brownian relaxation time and hence the increase of the SAR. The interesting point in mono-disperse state was the heat generation of pure SrFe₁₂O₁₉ under the AC magnetic field as a result of the decrement of the Brownian relaxation time.     

1-Methylimidazolium tetrafluoroborate [Hmim][BF4]: an efficient acidic ionic liquid catalyst for insertion of α-diazo compounds into the N–H bonds of amines

The reusable acidic ionic liquid, 1-methylimidazolium tetrafluoroborate [Hmim][BF₄], was found to be an effective catalyst for the insertion of α-diazoacetate into the N–H bonds of amines. The corresponding products were obtained in good yields and short reaction times via a simple procedure. The catalyst could be recycled and reused without any noticeable decrease in its activity.