In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N2 adsorption/desorption (BET), temperature-programmed reduction and desorption (H2-TPR and O2-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH4 oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl2O4 catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl2O4 has acceptable stability during 600 min time of reaction.
Molecular dynamics simulations are used to study the solid and liquid properties and to predict the melting point of 1-n-propyl-4-amino-1,2,4-triazolium bromide ([patr][Br]) using a force field based on the one developed by Canongia Lopes et al. (J. Phys. Chem. B 2004, 108, 2038) for dialkyl substituted imidazolium salts, which was modified by including terms from the general AMBER force field. Electrostatic charges for the intermolecular interactions were determined from gas-phase ab initio electron structure calculations of the triazolium cation. Simulations of the solid state at 100 K reproduced the experimental density to within 4%. Simulations from 100 K to the melting point and the liquid from 333 to 500 K were performed to determine the temperature dependence of the densities of the two phases. The structures of the solid and liquid phases are characterized with radial distribution functions, which show that there are strong spatial correlations among neighboring ion pairs in liquid [patr][Br]. The dynamic behavior of the ions in the liquid state is also studied by computing velocity autocorrelation functions and the mean-square displacements between the ions. The melting point is determined by simulating void-induced melting. Changes in the density, intermolecular energy, and Lindemann index are used as indicators of the melting transition. The computed melting point is 360 +/- 10 K, which is within 10% of the experimental value 333 K. 相似文献
Reaction mechanisms and activation energies for the complete conversion of ethene to ethene epoxide on two recently characterized oxidized Ag{111} surfaces have been determined from density functional theory. On both surfaces, epoxidation proceeds through a two-step nonconcerted mechanism via an oxametallacycle intermediate. The key implications are that both surfaces are active and that epoxidation can take place over a wide O coverage regime. 相似文献
Proton NMR shielding constants and chemical shifts for hydrogen guests in small and large cages of structure II clathrates are calculated using density-functional theory and the gauge-invariant atomic-orbital method. Shielding constants are calculated at the B3LYP level with the 6-311++G(d,p) basis set. The calculated chemical shifts are corrected with a linear regression to reproduce the experimental chemical shifts of a set of standard molecules. The calculated chemical shifts of single hydrogen molecules in the small and large structure II cages are 4.94 and 4.84 ppm, respectively, which show that within the error range of the method the H2 guest molecules in the small and large cages cannot be distinguished. Chemical shifts are also calculated for double occupancy of the hydrogen guests in small cages, and double, triple, and quadruple occupancy in large cages. Multiple occupancy changes the chemical shift of the hydrogen guests by approximately 0.2 ppm. The relative effects of other guest molecules and the cage on the chemical shift are studied for the cages with multiple occupancies. 相似文献
The structural and physical properties of nanoparticles of nitromethane are studied by using molecular dynamics methods with a previously developed force field. [Agrawal et al., J. Chem. Phys. 119, 9617 (2003).] This force field accurately predicts solid- and liquid-state properties as well as melting of bulk nitromethane. Molecular dynamics simulations of nanoparticles with 480, 240, 144, 96, 48, and 32 nitromethane molecules have been carried out at various temperatures. The carbon-carbon radial distribution function, dipole-dipole correlation function, core density, internal enthalpy, and atomic diffusion coefficients of the nanoparticles were calculated at each temperature. These properties were used to characterize the physical phases and thus determine the melting transitions of the nanoparticles. The melting temperatures predicted by the various properties are consistent with one another and show that the melting temperature increases with particle size, approaching the bulk limit for the largest particle. A size dependence of melting points has been observed in experimental and theoretical studies of atomic nanoparticles, and this is a further demonstration of the effect for large nanoparticles of complex molecular materials. 相似文献
Molecular dynamics simulations are used to calculate the melting point and some aspects of high-temperature solid-state phase transitions of ammonium nitrate (AN). The force field used in the simulations is that developed by Sorescu and Thompson [J. Phys. Chem. A 105, 720 (2001)] to describe the solid-state properties of the low-temperature phase-V AN. Simulations at various temperatures were performed with this force field for a 4 x 4 x 5 supercell of phase-II AN. The melting point of AN was determined from calculations on this supercell with voids introduced in the solid structure to eliminate superheating effects. The melting temperature was determined by calculating the density and the nitrogen-nitrogen radial distribution functions as functions of temperature. The melting point was predicted to be in the range 445 +/- 10 K, in excellent agreement with the experimental value of 442 K. The computed temperature dependences of the density, diffusion, and viscosity coefficient for the liquid are in good agreement with experiment. Structural changes in the perfect crystal at various temperatures were also investigated. The ammonium ions in the phase-II structure are rotationally disordered at 400 K. At higher temperatures, beginning at 530 K, the nitrate ions are essentially rotationally unhindered. The density and radial distribution functions in this temperature range show that the AN solid is superheated. The rotational disorder is qualitatively similar to that observed in the experimental phase-II to phase-I solid-state transition. 相似文献
Cellulose - The aggregation of silver nanoparticles (AgNPs) in colloidal solution and the oxidative cytotoxicity towards human cells are two major hindrances for their thriving medicinal... 相似文献