Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger

Journal of Thermal Analysis and Calorimetry - In recent decades, the growth of heat transfer using nanomaterials in the conventional base fluid has caught the attention of researchers...     

Novel tacrine-based acetylcholinesterase inhibitors as potential agents for the treatment of Alzheimer’s disease: Quinolotacrine hybrids

A new series of quinolotacrine hybrids including cyclopenta- and cyclohexa-quinolotacrine derivatives were designed, synthesized, and assessed as anti-cholinesterase (ChE) agents. The designed derivatives indicated higher inhibitory effect on the acetylcholinesterase (AChE) with IC₅₀ values of 0.285–100 µM compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 µM. Of these compounds, cyclohexa-quinolotacrine hybrids displayed a little better anti-AChE activity than cyclopenta-quinolotacrine hybrids. Compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c'] diquinolin-6-one (6m) including 3-hydroxyphenyl and cyclohexane ring moieties exhibited the best AChE inhibitory activity with IC₅₀ value of 0.285 µM. The kinetic and molecular docking studies indicated that compound 6m occupied both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE as a mixed inhibitor. Using neuroprotective assay against H₂O₂-induced cell death in PC12 cells, the compound 6h illustrated significant protection among the assessed compounds. In silico ADME studies estimated good drug-likeness for the designed compounds. As a result, these quinolotacrine hybrids can be very encouraging AChE inhibitors to treat Alzheimer’s disease.

Graphic abstract

A novel series of quinolotacrine hybrids were designed, synthesized, and evaluated against AChE and BChE enzymes as potential agents for the treatment of AD. The hybrids showed good to significant inhibitory activity against AChE (0.285–100 μM) compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 μM. Among them, compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c′] diquinolin-6-one (6 m) bearing 3-hydroxyphenyl moiety and cyclohexane ring exhibited the highest anti-AChE activity with IC₅₀ value of 0.285 μM. The kinetic and molecular docking studies illustrated that compound 6 m is a mixed inhibitor and binds to both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE.

     

Some necessary and sufficient conditions for Hypercyclicity Criterion

We give necessary and sufficient conditions for an operator on a separable Hilbert space to satisfy the hypercyclicity criterion. This paper is a part of the second author’s Doctoral thesis, written at Shiraz University under the direction of the first author.     

Using a new solvation model for thermodynamic study on the interaction of nickel with human growth hormone

Thermodynamics of the interaction between Ni²⁺ and human growth hormone (hGH) were determined at 27 °C in Nail solution by isothermal titration calorimetry. A new method to predict protein penetration and the effect of metal ions on the stability of proteins is introduced. The new solvation model was used to reproduce the enthalpies of Ni²⁺-hGH interaction over the whole range of Ni²⁺ concentrations. The solvation parameters recovered from the new equation, attributed to the structural change of hGH and its biological activity.     

Novel regiochemistry in the aqueous singlet oxygen ene reactions of carboxylic acid salts: a comparison of substrate structure

The singlet oxygen (¹Δ_g) photooxidations of angelic acid salt (1), tiglic acid salt (2), 2,3-dimethyl-2-butenoic acid salt (3), 3-ethoxycarbonyl-5,6-dihydro-2-methyl-4H-pyrane acid salt (4), cis-3-hexenoic acid salt (5), and trans-3-hexenoic acid salt (6) were conducted in deuterated water. The major and minor ene allylic hydroperoxide products were quantified and indicate that the allylic hydrogen geminal to the carboxylate group is preferentially abstracted in 1-4, whereas the allylic hydrogen α to the carboxylate is slightly favored for 5 and 6. We have attributed the observed regiochemistry in 1-4 to stabilizing hydrogen bonding interactions between the solvent and the perepoxide, which leads to the major ene product.     

Hyperfine structure studies of Tantalum

A narrow bandwidth ring dye laser pumped by an argon ion laser has been used to investigate the hyperfine structure of the even and odd parity levels of tantalum by optogalvanic spectroscopy in the wavelength range 5640 to 6050 Å. Seventeen transitions have been observed and eight of these have not been reported in the literature so far. These transitions involve 27 levels with 15 odd and 12 even parity configurations. The magnetic dipole hyperfine interaction constants A and the electric quadrupole interaction constants B for these levels have been computed and compared with the data available in literature. The results for the levels at 34799.71 cm^?1, 26960.46 cm^?1 and 19657.78 cm^?1 are reported for the first time.     

Kinetic-Spectrophotometric Determination of Trace Quantities of Thiocyanate Based on Its Landolt Effect on the Reaction of Bromate with Hydrochloric Acid1

A new method for the rapid and sensitive determination of trace quantities of thiocyanate based on its Landolt effect on the bromate-hydrochloric acid reaction was developed. The induction period of the reaction is proportional to the SCN^– concentration. The decolorization of methyl orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. We were able to determine thiocyanate in the range 2 × 10^–7–4 × 10^–5 M by this method. The relative standard deviation for 10 determinations of 1.5 × 10^–6 M thiocyanate ion is 0.19% and the detection limit of the method was 7.00 × 10^–8 M. The method was applied to the determination of thiocyanate in human blood serum and of saliva samples with satisfactory results.     

Neutron induced radiography in the determination of boron in drinking water

Neutron induced radiography has been applied to the determination of boron concentrations in drinking water, collected from natural springs of Reshian and Muzaffarabad areas of Azad Kashmir, Pakistan, using CR-39 etched track detectors. The technique is based upon the simultaneous irradiation with thermal neutrons of a sample of unknown concentration and a standard of known boron concentration, fixed on a track detector. The subsequent counting of alpha and ⁷Li tracks in the detector resulting from the ¹⁰B(n,)⁷Li nuclear reaction is done after chemical etching. Boron concentration in the sample is determined by comparing ⁷Li and alpha-particle track density with that of a standard of known boron concentration. Boron concentrations in drinking water samples from Muzaffarabad and Reshian area of Azad Kashmir have been found to vary from (0.054±0.001) mg/l to (0.250±0.004) mg/l with an average of (0.16±0.002) mg/l. The observed concentration of boron in drinking water has been found to be less than the provisional Maximum Acceptable Concentration level (0.4 mg//l) of WHO. The drinking water from the reported area has been found to be within safe limits as far as boron related health hazards are concerned.This revised version was published online in November 2005 with corrections to the Cover Date.