Thermal management of modern electric vehicle battery systems (MEVBS)

Journal of Thermal Analysis and Calorimetry - The operating temperature of Li-ion batteries used in modern electric vehicles should be maintained within an allowable range to avoid thermal runaway...     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Thermal analysis of renal stones

The chemical composition of 200 renal stones, collected from Taxila, Rawalpindi and Islamabad regions in Pakistan, was determined by thermogravimetric (TG) and differential thermal analysis (DTA) techniques. The thermal curves show weight losses at various temperatures indicating dehydration and decomposition phenomena of renal stones. Results were compared with qualitative data obtained by IR analysis which confirmed the chemical composition of various stones in the solid state. The thermal curves helped in the differentiation of various kinds of water held by stones and their chemical composition was obtained by weight loss during pyrolysis. It was found that 26.5% of the stones were pure whewellite, 3% weddellite, 13% uric acid anhydrous, 7.5% struvite, 2.5% ammonium acid urate, 0.5% cystine and 47% stones had mixed composition. In the mixed state the most frequent combinations were those of calcium oxalate with uric acid (14.5%) and with phosphates (27.5%).

---

Zusammenfassung Mittels TG und DTA wurde die chemische Zusammensetzung von 200 Nierensteinen untersucht, die in den Gebieten Taxila, Rawalpindi und Islamabad in Indien gesammelt wurden. Die Thermogramme zeigen Masseverluste bei verschiedenen Temperaturen, die auf Dehydratation und Zersetzung der Nierensteine hinweisen. Die Ergebnisse wurden mit den qualitativen Resultaten aus der IR-Analyse verglichen, welche die chemische Zusammensetzung der verschiedenen Steine im festen Zustand bekräftigte. Die Thermogramme halfen bei der Unterscheidung von verschieden gebundenem Wasser, ihre chemische Zusammensetzung wurde durch Gewichtsverlust bei der Pyrolyse bestimmt. Man fand, daß 26.5 % der Steine aus reinem Whewellit bestanden, 3 % aus Weddellit, 13 % aus anhydrierter Harnsäure, 7.5 % aus Struvit, 2.5 % aus Ammmoniumhydrogenurat, 0.5 % aus Cystin und 47 % der Steine hatten eine gemischte Zusammensetzung. Die häufigsten Kombinationen der Mischzusammensetzungen waren Calciumoxalat mit Harnsäure (14.5 %) und mit Phosphaten (27.5 %).

     

Temperature programmed reduction of silica supported nickel catalysts

Nickel oxide promoted catalysts are prepared by simple precipitation, precipitation from homogeneous solution and impregnation methods and their reduction behavior is monitored with temperature programmed reduction (TPR) technique. The effect of different parameters such as metal loading, method of preparation and heat treatment temperature are also observed on the reducibility of the catalysts. It is observed that reduction temperature increases with the increase of calcination temperature. Results indicate that the interactions between nickel oxide and silica begin with the increase of calcination temperature which leads to the formation of nickel hydrosilicates and are responsible for high temperature reduction peaks.     

Insecticidal Activity and Free Radical Scavenging Properties of Isolated Phytoconstituents from the Saudi Plant Nuxia oppositifolia (Hochst.)

Chromatographic purification of the alcoholic extract from the aerial parts of the Saudi plant Nuxia oppositifolia (Hochst.), Benth., resulted in five isolated phenolic compounds. Two flavones, hispidulin (1) and jaceosidin (2), and the phenylethanoid glycosides, verbascoside (3), isoverbascoside (4), and conandroside (5), were identified and their chemical structures were determined by spectroscopic analyses. The insecticidal activity of compounds 1 and 2, in addition to 11 compounds isolated in a previous research (6–16), was evaluated against the Yellow Fever mosquito, Aedes aegypti. Four compounds displayed adulticidal activity with LD₅₀ values of 2–2.3 μg/mosquito. Free radical scavenging properties of the plant extracts and compounds (1–5) were evaluated by measuring the 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate radical cation (ABTS^•+) scavenging activity. All compounds exhibited notable activity, compared with the positive control, l-Ascorbic acid. This study suggests that N. oppositifolia could be a promising source of secondary metabolites, some with lethal adulticidal effect against Ae. aegypti.     

Isotope shift studies in the spectra of Gadolinium in UV region and term shifts of high even levels of Gd I

Isotope shift Δσ(¹⁵⁶Gd?¹⁶⁰Gd) is reported in 70 spectral lines of neutral gadolinium atom (Gd I) in the 3290- 3920 Å region providing isotope shift data in UV lines of Gd I spectrum for the first time. The measurements were carried out on a photoelectric recording Fabry-Perot Spectrometer using highly enriched isotopic samples of gadolinium. Term isotope shifts ΔT(¹⁵⁶Gd?¹⁶⁰Gd) have been evaluated for 48 high lying even parity energy levels of Gd I using this data; new ΔT values have been obtained for 24 levels. Electronic configurations 4f⁷5d6s6p, 4ff⁷5df²6p and 4f⁸5d6s assigned earlier to these even levels have been either confirmed or configuration mixing pointed out in some of these levels. Probable assignment of 4f⁸5d6s configuration to 8 even levels between 32 930 and 35 500 cm^-1 have been confirmed.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

The determination of vanadium,molybdenum and tungsten by infrared spectroscopy

The infrared spectra of the 8-hydroxyquinolinates of molybdenum, vanadium and tungsten in the region 3–15 μ were investigated. It was found possible to determine the elements quantitatively, singly or in pairs, with an error of about 3%. Molybdenum was determined at 10.80 μ and 10.93 μ, vanadium at 10.50 μ, and tungsten at 10.61 μ or 10.90 μ.