The impact of time on the heat resistance of self-compacting high-performance concrete incorporated with recycled martials

The influence of time on the mechanical behavior of concrete after exposure to elevated temperatures has been studied. Twenty-one self-compacting high-performance concrete mixtures with different incorporation amounts of coarse recycled concrete aggregate (RCA) and three unprocessed waste powder materials have been tested at age of 270 days for residual compressive and flexural strength after exposure to fire. The results have been compared to the results for the same concrete, which have been studied at age of 90 days. A new parameter has been introduced for comparing the responses of concrete to elevated temperatures at different ages; this parameter was the “heat resistance” which expresses the total area under the curve of the relative residual strength (compressive or flexural) after exposing to six temperature degrees (20, 150, 300, 500, 600, and 800 °C). The results showed that the age of concrete has an influence on the response of concrete to elevated temperatures. The heat resistance of compressive strength enhanced with age but the concrete behaved with a tendency different to that at the age of 90 days. The heat resistance of flexural strength has not been affected or slightly decreased but not with more than 10% to that at the age of 90 days. The used waste powder materials were unprocessed waste fly ash, waste cellular concrete powder and waste perlite powder; they proved that using any of them up to 15% as a replacement for cement with 0% or 25% of RCA enhanced the concrete resistance for the fire with time. The main two reasons for changing of residual strength with the time were the changing of water content and the proceeding of hydration of the binder. In general, long ages testing properties of concrete simulate the real behavior of concrete structures accurately.

     

Radiation-Assisted Green Synthesis and Characterization of Selenium Nanoparticles,and Larvicidal Effects on Culex pipiens complex

Journal of Cluster Science - Many environmental hazards are due to chemical insecticides and enhance mosquito species' resistance. This problem is solved by using safer nanocides that reduce...     

Click Synthesis of 1,2,3-Triazole Nucleosides Based on Functionalized Nicotinonitriles

Russian Journal of Organic Chemistry - A facile synthesis of a new series of 1,2,3-triazolyl nucleosides via one-pot click reaction is described. Acetylenic nicotinonitriles synthesized previously...     

In memory of Professor Ali H. Nayfeh

Nonlinear Dynamics - In this paper, we propose and numerically study a nonlinear, asymmetric, passive metamaterial that achieves giant non-reciprocity with (i) broadband frequency operation and...     

On the efficacy of charging a battery using a chaotic energy harvester

Nonlinear Dynamics - Introduction of stiffness nonlinearities to broaden the frequency bandwidth of vibratory energy harvesters has the adverse influence of complicating the response behavior of...     

Graphene to graphite; a layer by layer experimental measurements and density function theory calculations of electric conductivity

ABSTRACT

We measured the electric conductivity of large (25?×?50?mm) graphene films as a function of number of layers in the range of 1–20 layers. We also calculated the energy gap for such samples using density function theory. Our results showed a conductivity slightly above that of ITO for monolayer graphene and an exponential decrease as the number of graphene layers increased. Both experimental and simulation results showed a convergence of graphene into graphite at as little as 18–20 layers.     

Oxidation of phenol and chlorophenols on platinized titanium anodes in an acidic medium

A comparative study of oxidation of phenol, 3-chlorophenol, 4-chlorophenol, and 2,4-dichlorophenol on Pt/Ti and Ce,Pt/Ti electrocatalysts is performed via cyclic voltammetry. It is shown that the surface morphology and roughness of the anode do not change after modification with cerium. The formal kinetic orders of electrooxidation of all compounds are found to be less than one. It is shown that the β temperature coefficients of the rate of oxidation of chlorophenols grow by 10 to 50% when the Ce,Pt/Ti anode is used at a substrate concentration of 1 mM. A tenfold increase in concentration reduces the effect of cerium additive, except for 3-chlorophenol: the latter exhibits a 250% increase in the β value, compared to the Pt/Ti anode.     

Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.