pH和还原性双响应性壳聚糖纳米粒子作为药物传输载体

用硫辛酸修饰壳聚糖并制备纳米粒子,用催化量的二硫苏糖醇(DTT)处理得到二硫键交联的壳聚糖纳米粒子.二硫键结构的引入不仅使纳米粒子具有还原相应性,而且还引入疏水基团,疏水性的抗癌药阿霉素和荧光探针荧光素通过疏水作用负载于纳米粒子内.二硫交联结构的形成使负载的阿霉素在没有还原剂的环境中(模拟血液的低还原环境)的释放速率大大减慢,而在10 mmoL/L DTT(模拟细胞内高浓度谷胱甘肽环境)存在下,交联纳米粒子负载的阿霉素快速释放,这可归因于DTT还原二硫键使交联结构破坏.流式细胞实验表明,当介质的pH值由7.4(血液和正常组织pH值)降低到7.0、6.8和6.5(模拟肿瘤组织的微酸性环境)时,交联纳米粒子进入细胞的倾向逐渐增加,这是由于在中性环境中纳米粒子表面是电中性和亲水性的,而在酸性介质中,氨基的质子化使纳米粒子表面带正电荷,zeta电位数据证实这种推断.细胞毒性实验表明,在pH6.5的环境中负载阿霉素的交联纳米粒子对HeLa细胞的毒性大于在pH 7.4时的毒性.     

“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

Synthesis of self-assemble pH-responsive cyclodextrin block copolymer for sustained anticancer drug delivery

Well-defined p H-responsive poly(ε-caprolactone)-graft-β-cyclodextrin-graft-poly(2-(dimethylamino)ethylmethacrylate)-co-poly(ethylene glycol) methacrylate amphiphilic copolymers(PCL-g-β-CD-g-P(DMAEMA-co-PEGMA)) were synthesized using a combination of atom transfer radical polymerization(ATRP),ring opening polymerization(ROP) and "click" chemistry.Successful synthesis of polymers was confirmed by Fourier transform infrared spectroscopy(FTIR),proton nuclear magnetic resonance(1H-NMR),and gel permeation chromatography(GPC).Then,the polymers could selfassemble into micelles in aqueous solution,which was demonstrated by dynamic light scattering(DLS) and transmission electron microscopy(TEM).The p H-responsive self-assembly behavior of these copolymers in water was investigated at different p H values of 7.4 and 5.0 for controlled doxorubicin(DOX) release,and these results revealed that the release rate of DOX could be effectively controlled by altering the p H,and the release of drug loading efficiency(DLE) was up to 88%(W/W).CCK-8 assays showed that the copolymers had low toxicity and possessed good biodegradability and biocompatibility,whereas the DOX-loaded micelles remained with high cytotoxicity for He La cells.Moreover,confocal laser scanning microscopy(CLSM) images revealed that polymeric micelles could actively target the tumor site and the efficient intracellular DOX release from polymeric micelles toward the tumor cells further confirmed the anti-tumor effect.The DOX-loaded micelles could easily enter the cells and produce the desired pharmacological action and minimize the side effect of free DOX.These results successfully indicated that p H-responsive polymeric micelles could be potential hydrophobic drug delivery carriers for cancer targeting therapy with sustained release.     

A Switchable Open/closed Polyaromatic Macrocycle that Shows Reversible Binding of Long Hydrophilic Molecules

In spite of wide‐ranging previous studies on synthetic macrocycles, the installation of open–close functions into the frameworks remains a challenge. We present a new polyaromatic macrocycle capable of switching between open and closed forms in response to external stimuli, namely, base and acid. The macrocycle, which is prepared in three steps, has a well‐defined hydrophobic cavity with a length of around 1 nm, surrounded by four pH‐responsive acridinium panels. The open and closed structures were confirmed by single‐crystal X‐ray analysis. The cylindrical cavity can bind long hydrophilic molecules up to 2.7 nm in length in neutral water and then release the bound guests through a reversible open‐to‐closed structural change upon simple addition of base.     

Reversibly self-assembled pH-responsive PEG-p(CL-g-TMC) polymersomes

Polymersomes have gained much interest within the biomedical field as drug delivery systems due to their ability to transport and protect cargo from the harsh environment inside the body. For an improved drug efficacy, control over cargo release is however also an important factor to take into account. An often employed method is to incorporate pH sensitive groups in the vesicle membrane, which induce disassembly and content release when the particles have reached a target site in the body with the appropriate pH, such as the acidic microenvironment of tumor tissue or the endosome. In this paper, biodegradable poly(ethylene glycol)-poly(caprolactone-gradient-trimethylene carbonate)-based polymeric vesicles have been developed with disassembly features at mild acidic conditions. Modifying the polymer backbone with imidazole moieties results in vesicle disassembly upon protonation due to the lowered pH. Furthermore, upon increasing the pH efficient re-assembly into vesicles is observed due to the switchable amphiphilic nature of the polymer. When this re-assembly process is conducted in presence of cargo, enhanced encapsulation is achieved. Furthermore, the potency of the polymeric system for future biomedical applications such as adjuvant delivery is demonstrated.     

Synthesis of Stimuli-responsive Nanoparticles by Solution Polymerization

In this study, stimuli-responsive nanoparticles were prepared by solution polymerization. Two synthesis routes are proposed to synthesize the particles, the monomer route and the polymer/monomer route. For the monomer route, pH and thermal sensitive nanoparticles were synthesized from acrylic acid and N-isopropylacrylamide. For the polymer/monomer route, the pH sensitive nanoparticles were synthesized from chitosan and acrylic acid. The effect of reaction time, initiator concentration and agitation rate on the particle size and the size distribution were investigated. The stimuli-responsive nanoparticles could be directly blended with other polymers to prepare stimuli-responsive functional membranes.     

Polymerization-induced self-assembly of amino-acid-based nano-objects by reversible addition–fragmentation chain-transfer dispersion polymerization

A series of amino-acid-based amphiphilic diblock copolymer nano-objects having different morphologies were developed by reversible addition–fragmentation chain-transfer (RAFT) dispersion polymerization of styrene (St) in methanol. This was mediated by six different hydrophilic poly(N-acryloyl amino acid) macro-chain transfer agents (CTAs), including three carboxylic-acid-containing ones, poly(N-acryloyl-l -proline) (PAProOH), poly(N-acryloyl-4-trans-hydroxy-l -proline) (PAHypOH), and poly(N-acryloyl-l -threonine) (PAThrOH) prepared by RAFT polymerization, and their methyl ester forms, PAProOMe, PAHypOMe, and PAThrOMe. The effects of polymerization conditions on RAFT dispersion polymerization of St using a dithiocarbamate-terminated PAProOH was investigated. A systematic study of the effects of monomer conversion and concentration afforded the formation of various morphologies (i.e., spheres, worms, and vesicles). The effects of hydrogen-bonding and ionic interactions of the macro-CTAs on the assembled structures of the nano-objects were evaluated using six different macro-CTAs. Transforming the products from methanol to water via dialysis produced amino-acid-based block copolymer nano-objects, exhibiting pH-responsive morphological change, in aqueous solution.     

Poly(2-(dimethylamino)ethyl methacrylate) brushes fabricated by surface-mediated RAFT polymerization and their response to pH

In this study, well-defined, high density poly(2-(dimethylamino)ethyl methacrylate) [poly(DMAEMA)] brushes were fabricated by the combination of the self-assembly of a monolayer of RAFT agent and surface-mediated RAFT polymerization. The whole fabrication process of the poly(DMAEMA) was followed by water contact angles, grazing angle-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Kinetic studies revealed a linear increase in poly(DMAEMA) film thickness with polymerization time, indicating that the chain growth from the surface was a controlled process. Characterization of the poly(DMAEMA) brushes, such as molecular weight and thickness determination, were measured by gel permeation chromatography, and ellipsometry, and the grafting density was estimated. The pH response of the poly(DMAEMA) brushes was further investigated and the results verified the “brush-like” to “mushroom-like” transition of the poly(DMAEMA) chains due to the reversible protonation/deprotonation upon changing the solution pH.     

pH响应性P(MMA-co-MAA-co-HEMA)微凝胶的制备及其性能

利用预乳化乳液法制备了不同单体配比的聚(甲基丙烯酸甲酯-co-甲基丙烯酸-co-甲基丙烯酸羟乙酯)(P(MMA-co-MAA-co-HEMA))微凝胶分散液;采用透射电子显微镜、动态光散射仪研究了微凝胶的微观形态、粒径大小及其溶胀率;利用试管倒转法对微凝胶分散液的凝胶化相转变行为进行了研究,借助椎板流变仪考察了所形成胶态凝胶的储能模量与单体配比、微凝胶分散液浓度和温度的关系.结果表明,所制备的微凝胶的数均粒径为90 nm左右,当MMA与MAA的投料质量不变时,随着HEMA含量的增加,分散液凝胶化所需的临界最小浓度增大,临界最大pH值减小,胶态凝胶的储能模量增加.当保持单体MMA与HEMA的投料质量不变时,随着单体MAA投料质量的增多,微凝胶的数均粒径和溶胀率增大,胶态凝胶的储能模量先升高后降低;当MAA占单体总摩尔数的25%时,浓度为15 wt%的微凝胶分散液在扫描频率为100 rad/s时,胶态凝胶的储能模量最高可达2×104Pa.这类微凝胶分散液在组织工程支架材料方面有潜在的应用价值.     

pH-Responsive Nanocomposites From Methylcellulose and Attapulgite Nanorods: Synthesis,Swelling and Absorption Performance on Heavy Metal Ions

A pH-responsive methylcellulose-g-poly(sodium acrylate)/attapulgite (MC-g-PNaA/APT) nanocomposite superabsorbent was prepared by the free-radical solution polymerization of methylcellulose (MC), sodium acrylate (NaA) and nanoscale attapulgite (APT) in the presence of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The structure and morphology of the nanocomposite were characterized by FTIR, FESEM, TEM, XRD and EDS techniques, and the effects of the amount of MBA, MC and APT nanorods on swelling behaviors were also evaluated. Results indicate that NaA has been grafted onto MC macromolecular chains and APT nanorods participated in polymerization by its active silanol groups, and APT led to a better dispersion in the MC-g-PNaA matrix. The incorporation of APT clearly enhanced the swelling capacity and rate of the superabsorbent. In addition, the nanocomposite exhibited excellent absorption capacity on heavy metal ions, and its absorption amounts on Ni²⁺, Cu²⁺ and Zn²⁺ ions reached 9.86, 7.66 and 21.86 times greater than active carbon (AC). The biopolymer-based nanocomposite superabsorbents can be used as a potential water-saving material and candidate of AC for heavy metal ion absorption.