主裂纹与微裂纹相互作用问题的有效数值计算方法

提出了平面弹性介质中主裂纹与微裂纹相互作用问题的有效数值计算 方法. 通过把适于单一裂纹的Bueckner原理扩充到含有多裂纹的一般体系，将原问题分解 为承受远处载荷不含裂纹的均匀问题，和在远处不承受载荷但在裂纹面上承受面力的多裂纹 问题. 于是，以应力强度因子作为参量的问题可以通过考虑后者(多裂纹问题)来解决，而 利用提出的杂交位移不连续法，这种多裂纹问题是容易数值求解的. 列举 Cai和 Faber为评价主裂纹与微裂纹相互作用问题的近似方法而列举的算例，说明 该数值方法对分析平面弹性介质中主裂纹与微裂纹相互作用问题既简单又非常有效.     

损伤和断裂的统一

本文讨论了连续损伤力学基础的缺陷,从微裂纹随机演化出发给损伤概念作出新的普适的统计定义,导出了损伤断裂几率的动力学方程,使损伤、断裂、统计、微观机理及宏观特性五者有机地相结合,从而有可能形成一个统一的损伤断裂微观统计理论。     

Effective elastic moduli of an inhomogeneous medium with cracks

In the present paper, the effective elastic moduli of an inhomogeneous medium with cracks are derived and obtained by taking into account its microstructural properties which involve the shape, size and distribution of cracks and the interaction between cracks. Numerical results for the periodic microstructure of different dimensions are presented. From the results obtained, it can be found that the distribution of cracks has a significant effect on the effective elastic moduli of the material. The project supported by the National Education Committee for Doctor     

层裂的分形机理及分维和连接阈值的关系

通过对微裂纹连接的动力学分析，提出了描述层裂损伤演化的统计分形模型，指出分形层裂面的形成机理与层裂中微裂纹级串连接的动力学过程密切相关，由此，得到了一种单峰的分维－连接阈值关系，定性解释了分维随专心韧性单峰变化的实验现象。     

Influence of particle size on the fracture toughness of a PP-based particulate composite

The main focus of this paper is a numerical investigation of the fracture behavior of a particulate composite (CaCO₃-PP). The composite is modeled as a three-phase continuum and simulated numerically on a microscale by using finite elements. The propagation of a microcrack in a matrix filled with rigid particles covered by an interphase is analyzed. The stress distribution is determined for a variety of particle sizes and material properties of the interphase. The final results, in agreement with experimental data, confirm that the microcrack behavior depends on particle sizes. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 45, No. 3, pp. 411-418, May-June, 2009.     

Multiscale approach to micro/macro fatigue crack growth in 2024-T3 aluminum panel

When two contacting solid surfaces are tightly closed and invisible to the naked eye,the discontinuity is said to be microscopic regardless of whether its length is short or long.By this definition,it is not sufficient to distinguish the difference between a micro-and macro-crack by using the length parameter.Microcracks in high strength metal alloys have been known to be several centimeters or longer.Considered in this work is a dual scale fatigue crack growth model where the main crack can be micro or macro but there prevails an inherent microscopic tip region that is damaged depending on the irregularities of the microstructure.This region is referred to as the"micro-tip"and can be simulated by a sharp wedge with different angles in addition to mixed boundary conditions.The combination is sufficient to model microscopic entities in the form of voids,inclusions,precipitations,interfaces,in addition to subgrain imperfections,or cluster of dislocations.This is accomplished by using the method of"singularity representation"such that closed form asymptotic solutions can be obtained for the development of fatigue crack growth rate relations with three parameters.They include:(1)the crack surface tightness*represented by o/=0.3-0.5 for short cracks in region I,and 0.1-0.2 for long cracks in region II,(2)the micro/macro material properties reflected by the shear modulus ratio*(=micro/macro varying between 2 and 5)and(3)the most sensitive parameter d*being the micro-tip characteristic length d*(=d/do)whose magnitude decreases in the direction of region I II.The existing fatigue crack growth data for 2024-T3 and 7075-T6 aluminum sheets are used to reinterpret the two-parameter da/dN=C(K)nrelation where K has now been re-derived for a microcrack with surfaces tightly in contact.The contact force will depend on the mean stress m or mean stress ratio R as the primary parameter and on the stress amplitude a as the secondary parameter.     

EVOLUTION OF THE MICROCRACKS IN WHISKER TOUGHENING CERAMIC MATRIX COMPOSITES

The modified equivalent inclusion theory by the authors and the internalvariable theory are employed to investigate the evolution of the microcracks in whiskertoughening ceramics and the influence of the microcracks on the mechanical propertiesof the material. The effect of residual thermostrain, whisker content and aspect ratio isconsidered. The modulus, initial nonlinear load, strength and nonlinear constitutiverelation are calculated and some important conclusions are given.     

微裂纹扩展中的分形现象及其计算机仿真

本文探讨了采用仿真技术研究微裂纹连接过程和生成分形断口表面的可行性，发展了用于仿真微裂纹随机生长行为的ＧＯ模型的基本构相，并进行了计算机仿真实验，由此得出了一此有的结论。     

Al／SiCp复合材料微裂纹产生的原位研究

本文用扫描电镜下的单面缺口拉伸试验，考察了Ａｌ／ＳｉＣｐ试样的空穴的生成，裂纹的扩展以及裂纹前端微断裂区，指出该材料变脆的原因是由于微断裂区中的一次空穴所造成的。     

α-Fe裂纹的分子动力学研究

通过分子动力学方法，模拟了α-Fe裂纹的单轴拉伸实验中的形变过程.研究了不同晶体取向裂纹的形变特点和断裂机理，观察到各种形变现象，如位错形核和发射，位错运动，堆垛层错或孪晶的形成，纳米空洞的形成与连接等.计算结果表明，裂纹扩展是塑性过程和弹性过程相结合的过程，其中塑性过程表现为由裂尖发射的位错导致的原子切变行为，而弹性过程的发生则是由无位错区中的原子断键所导致.同时还研究了α-Fe裂纹的形变特点和断裂机理与温度场和应力场的依赖关系.