极大3限制边连通二部图的充分条件

设G=(V,E)是一个连通图.称一个边集合S■E是一个k限制边割,如果G-S的每个连通分支至少有k个顶点.称G的所有k限制边割中所含边数最少的边割的基数为G的k限制边连通度,记为λ_k(G).定义ξ_k(G)=min{[X,■]:|X|=k,G[X]连通,■=V(G)\X}.称图G是极大k限制边连通的,如果λ_k(G)=ξ_k(G).本文给出了围长为g>6的极大3限制边连通二部图的充分条件.     

Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

Dielectric loss and electromagnetic absorption performance study of 1T/2H-MoS2/Mo2S3 nanocomposites with different ratios

High dielectric loss materials have an important application in electromagnetic (EM) absorption fields. In this paper, the ternary nanocomposites: 1T/2H-MoS₂/Mo₂S₃ with heterogeneous interfaces are synthesized by hydrothermal method. XRD, XPS, FTIR, SEM, and TEM measurements are applied to study the structure, morphology, and composition. The frequency spectra of complex permittivity (ε_r-f) are measured in 2–18 GHz by vector network analyzer. The results show that the nanocomposites have higher dielectric loss angle tangents than the reported 2H-MoS₂ absorbers. Based on the ε_r-f spectra, the reflection loss-frequency curves ($RL-f$) are simulated at given thicknesses. An effective absorption bandwidth of 5.2 GHz (12.8–18 GHz) and a $RL$ peak of −29.49 dB are achieved in a thin thickness of 1.62 mm, which are comparable to the reported 2H-MoS₂ absorbers with complex composition, showing that the 1T/2H-MoS₂/Mo₂S₃ nanocomposites have great application potential as an EM wave absorber in the K_u band.     

A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Ce掺杂CrSi2电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及Ce掺杂CrSi2的电子结构和光学性质进行理论计算。计算结果表明，未掺杂CrSi2是间接带隙半导体，其禁带宽度为0.392 eV，掺杂Ce元素，仍然是间接半导体，带隙宽度下降为0.031eV。未掺杂CrSi2在费米能级附近主要由Cr-5d、Si-3p态贡献。Ce掺杂后在费米能级附近主要由Cr-5d轨道，Ce-4f轨道，C-2p，Si-3p轨道贡献，掺杂后电导率提高。未掺杂CrSi2有两个介电峰，掺杂后，只有一个介电峰。未掺杂CrSi2，在能量为6.008处吸收系数达到最大值，掺杂后在能量为5.009eV处，吸收系数达到最大值。     

Accurate theoretical prediction of optical properties of BODIPY dyes

Boron-dipyrromethene dyes (BODIPY) are of great interest nowadays mostly due to their valuable optical properties. Nevertheless, no systematic research of the optical property dependence on the structure of dyes has been performed yet. In this work, analysis of the available quantum-chemical methods for BODIPY optical property calculations has been carried out. The accuracy of eight DFT functionals has been studied. The solvation effects upon excitation have been considered within two schemes. The methods that predict the absorption and emission spectra of BODIPY derivatives with high accuracy have been proposed. Using the suggested methods, the influence of nature of substituents and their position in the BODIPY core on the optical spectra of the dyes has been studied. A complex pattern of red- and blue-shifts in optical spectra in dependence of nature and position of substituents has been revealed. The results of this work provide the way for efficient design of BODIPY derivatives with desired optical properties.     

La掺杂和空位对ZnS磁性和光学性能影响的第一性原理研究

利用密度泛函理论框架下的平面波超软赝势法,通过第一性原理对La掺杂与Zn空位(V_(Zn))及La掺杂与S空位(V_S)共存的ZnS体系的电子结构、磁性机理、形成能及吸收光谱进行了研究.结果表明, La掺杂与空位(V_(Zn)或V_S)的空间位置最近时,掺杂体系的形成能最低,体系最稳定.另外,La掺杂与Zn空位共存时,体系具有磁性,且体系的净磁矩与La原子与Zn空位的相对位置有关;La掺杂与S空位共存时,掺杂体系无磁性,但此时体系的禁带宽度最窄且吸收光谱红移最显著.     

Dual-band isotropic metamaterial absorber based on near-field interaction in the Ku band

We numerically and experimentally investigate single-band and dual-band isotropic metamaterial absorbers (IMAs) based on metallic disks. By optimizing the diameter of the metallic disks and the thickness of the dielectric substrate, the single-band IMA is observed at 16.2 GHz with absorptivity of 97%. When adding one disk-pair to the structure, the dual-band IMA is obtained at 12.8 and 15.5 GHz due to the symmetry breaking. The physical mechanics is explained by near-field coupling effect and equivalent LC circuit model. The measurement results performed in the range 12–18 GHz show a good agreement with simulation and theoretical analysis. Our findings demonstrate a new approach to achieve dual-band and multi-band IMAs.