Shape morphing and topology optimization of fluid channels by explicit boundary tracking

An integrated shape morphing and topology optimization approach based on the deformable simplicial complex methodology is developed to address Stokes and Navier‐Stokes flow problems. The optimized geometry is interpreted by a set of piecewise linear curves embedded in a well‐formed triangular mesh, resulting in a physically well‐defined interface between fluid and impermeable regions. The shape evolution is realized by deforming the curves while maintaining a high‐quality mesh through adaption of the mesh near the structural boundary, rather than performing global remeshing. Topological changes are allowed through hole merging or splitting of islands. The finite element discretization used provides smooth and stable optimized boundaries for simple energy dissipation objectives. However, for more advanced problems, boundary oscillations are observed due to conflicts between the objective function and the minimum length scale imposed by the meshing algorithm. A surface regularization scheme is introduced to circumvent this issue, which is specifically tailored for the deformable simplicial complex approach. In contrast to other filter‐based regularization techniques, the scheme does not introduce additional control variables, and at the same time, it is based on a rigorous sensitivity analysis. Several numerical examples are presented to demonstrate the applicability of the approach.     

湍流大气传输中跟踪抖动对远场影响的仿真研究

分析了跟踪抖动对湍流大气传输远场光斑的影响。基于麦克斯韦电磁场理论,采用大气相干长度对大气湍流进行描述,推导了发射光束因跟踪抖动导致光轴偏离的远场表达式。在此基础上,利用相位屏法模拟抖动引起的倾斜相位和大气折射率起伏引起的相位调制,并采用低频补偿的功率谱反演法对传输过程进行了数值仿真。分析了不同跟踪抖动、湍流强度条件下远场光斑质心脱靶量的变化,以及不同尺寸模拟目标的回波概率。分析结果表明,在传输距离为10 km时,强湍流造成的远场光斑脱靶量可达几十μrad;当跟踪抖动较大时,湍流强弱对脱靶量影响差别很小。最后,对一定尺寸的模拟目标,从探测回波概率的角度给出了发射系统跟踪抖动量的控制范围。     

基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗。TADF材料作为主体材料在提高OLED器件的光电性能方面具有很大的潜力。     

A velocity program using the Kanade–Lucas–Tomasi feature-tracking algorithm with demonstration for pressure and electroosmosis conditions

Investigating microfluidic flow profiles is of interest in the microfluidics field for the determination of various characteristics of a lab-on-a-chip system. Microparticle tracking velocimetry uses computational methods upon recording video footage of microfluidic flow to ultimately visualize motion within a microfluidic system across all frames of a video. Current methods are computationally expensive or require extensive instrumentation. A computational method suited to microparticle tracking applications is the robust Kanade–Lucas–Tomasi (KLT) feature-tracking algorithm. This work explores a microparticle tracking velocimetry program using the KLT feature-tracking algorithm. The developed program is demonstrated using pressure-driven and EOF and compared with the respective mathematical fluid flow models. An electrostatics analysis of EOF conditions is performed in the development of the mathematical using a Poisson's Equation solver. This analysis is used to quantify the zeta potential of the electroosmotic system. Overall, the KLT feature-tracking algorithm presented in this work proved to be highly reliable and computationally efficient for investigations of pressure-driven and EOF in a microfluidic system.     

Cyclometalated Iridium(III) Complexes as Two‐Photon Phosphorescent Probes for Specific Mitochondrial Dynamics Tracking in Living Cells

Five cyclometalated iridium(III) complexes with 2‐phenylimidazo[4,5‐f][1,10]phenanthroline derivatives ( IrL1 – IrL5 ) were synthesized and developed to image and track mitochondria in living cells under two‐photon (750 nm) excitation, with two‐photon absorption cross‐sections of 48.8–65.5 GM at 750 nm. Confocal microscopy and inductive coupled plasma‐mass spectrometry (ICP‐MS) demonstrated that these complexes selectively accumulate in mitochondria within 5 min, without needing additional reagents for membrane permeabilization, or replacement of the culture medium. In addition, photobleaching experiments and luminescence measurements confirmed the photostability of these complexes under continuous laser irradiation and physiological pH resistance. Moreover, results using 3D multicellular spheroids demonstrate the proficiency of these two‐photon luminescent complexes in deep penetration imaging. Two‐photon excitation using such novel complexes of iridium(III) for exclusive visualization of mitochondria in living cells may substantially enhance practical applications of bioimaging and tracking.     

基于毕业学生的信息追踪与反馈机制提高教学管理效率与人才培养质量

学生是教育的受体,学生的意见在推进课程建设、教学改革以及提升人才培养质量等方面具有重要的指导和借鉴意义。秉承立德树人的理念,以服务学生成长发展为核心,育人成果为导向,探讨做好教育的实施主体和接受主体之间互相反馈的机制和模式,对不断推动教学改革向高效率和高质量方向发展具有重要意义。着重探讨了化学学院做好毕业生信息追踪的具体路径和意见反馈模式。     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

基于眼动追踪技术的高中生化学问题解决的差异性研究——以“氧化还原反应”为例

以氧化还原反应相关试题作为测试材料,采用眼动追踪技术对12名高一学生进行3(学业水平)*3(试题难度)两因素混合实验,实验结束后进行追述性口语报告。结果表明,在氧化还原反应问题解决过程中学优生信息加工速度快、深度浅、难度小,采用正向加工和逆向排除结合的策略。学中生信息加工速度慢、深度深、难度大,采用正向加工策略。学困生轻易放弃,信息加工无效。随着问题难度的增大,学生信息加工速度变慢、深度变深、难度变大。     

A correlative classifiers approach based on particle filter and sample set for tracking occluded target

Target tracking is one of the most important issues in computer vision and has been applied in many fields of science, engineering and industry. Because of the occlusion during tracking, typical approaches with single classifier learn much of occluding background information which results in the decrease of tracking performance, and eventually lead to the failure of the tracking algorithm. This paper presents a new correlative classifiers approach to address the above problem. Our idea is to derive a group of correlative classifiers based on sample set method. Then we propose strategy to establish the classifiers and to query the suitable classifiers for the next frame tracking. In order to deal with nonlinear problem, particle filter is adopted and integrated with sample set method. For choosing the target from candidate particles, we define a similarity measurement between particles and sample set. The proposed sample set method includes the following steps. First, we cropped positive samples set around the target and negative samples set far away from the target. Second, we extracted average Haar-like feature from these samples and calculate their statistical characteristic which represents the target model. Third, we define the similarity measurement based on the statistical characteristic of these two sets to judge the similarity between candidate particles and target model. Finally, we choose the largest similarity score particle as the target in the new frame. A number of experiments show the robustness and efficiency of the proposed approach when compared with other state-of-the-art trackers.