基于自组装膜的光纤错位型氨气传感器

演示了一种基于单壁碳纳米管（SWCNTs）-聚合物自组装复合膜的光纤错位型氨气传感器。通过层层自组装技术在高Q谐振器上涂覆薄膜，薄膜上存在大量的游离羧基以及较大的比表面积，这提供了光与薄膜之间的强相互作用，以及对氨气的高吸附性和选择性。光谱随氨气浓度影响的有效折射率而变化。在(10～37) ×10?6的低浓度范围内，光谱变化与氨气浓度差之比即灵敏度为13.25 pm/10?6，检测极限为3.77 ×10?6并且具有良好的线性。这项工作研制为低浓度和高选择性氨气传感器提供了一种有效的方法。     

241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

蓝宝石冲击消光晶向效应的第一性原理

蓝宝石的冲击消光现象是高压领域中的研究热点.低压段(86 GPa范围内)的实验研究表明蓝宝石的冲击消光与晶向相关,但在高压段(压力范围:131255 GPa)是否也具有晶向相关性目前尚不清楚.为此,利用第一性原理方法,分别计算了八个不同晶向的蓝宝石理想晶体和含氧离子空位缺陷晶体在高压段的光吸收性质,结果发现:1)蓝宝石在高压段的冲击消光表现出明显的晶向效应,且该效应还随压力增大而增强;一步的数据分析可以看出,在冲击实验采用的波段内,a晶向的消光最弱(透明性最好),c晶向的消光最强与c晶向的消光接近,g晶向的消光要弱于s晶向的消光.鉴于此,如果在高压段开展加窗冲击波实验,建议选择a晶向或m晶向的蓝宝石作为其光学窗口.本文结果不仅有助于深入地认识蓝宝石在极端条件下的光学性质,而且对未来的实验研究有重要的参考作用.     

激光雷达辅助驾驶道路参数计算方法研究

针对特定场景辅助驾驶的需求，构建道路场景车载激光雷达三维扫描系统，并设计基于三维激光点云的道路参数提取与计算方法，包括路面宽度、横杆或桥梁或隧道限高、拐弯半径等等，为辅助判断道路的可通过性提供决策依据。测试和对比实验表明，所设计算法效果稳定、精度良好，在效率和自动化程度上有一定优势，可为辅助驾驶提供非常有益的决策参数。     

Understanding defect production in an hcp Zr crystal upon irradiation:An energy landscape perspective

Primary radiation damage in hcp Zr,including both defect production in a single collision cascade and damage buildup through cascade overlap,is investigated using molecular dynamics(MD)simulations from a potential energy landscape(PEL)perspective.It is found that the material’s response to an energetic particle can be understood as a trajectory in the PEL comprising a fast uphill journey and a slow downhill one.High-temperature-induced damage reduction and the difference in the radiation tolerance between metals and semiconductors can be both qualitatively explained by the dynamics of the trajectory associated with the topographic features of the system’s PEL.Additionally,by comparing irradiation and heating under a nearly identical condition,we find that large atomic displacements stemming from the extreme locality of the energy deposition in irradiation events are the key factor leading to radiation damage in a solid.Finally,we discuss the advantages of the PEL perspective and suggest that a combination of the PEL and the traditional crystallographic methods may provide more insights in future work.     

First principles study on the structural,electronic and phonon properties of monolayer B2Si

Using first principles density functional theory, we predict a monolayer B₂Si structure with space group Pmm2 in the present work. This structure is confirmed to be dynamically stable. Based on the plane wave pseudopotential approach, the charge density, electron localization function, density of states, energy band, phonon property and thermal conductivity of Pmm2-B₂Si are systematically studied. It is interesting that the sp² hybridization and coordination bond of Si are found in Pmm2-B₂Si, which is the most important factor for its structural stability. The density of states and energy band analysis reveals that Pmm2-B₂Si is metallic because of the partial occupied Si 3pz and B 2pz states. Moreover, the acoustic-optical coupling is important for phonon transport in Pmm2-B₂Si, and the contribution of optical modes to the lattice thermal conductivity along the [100] and [010] directions is 13% and 12%, respectively. This study gives a fundamental understanding of the structural, electronic and phonon properties in Pmm2-B₂Si.     

Defects related emission and nanosecond optical power limiting in CuS quantum dots

We report optical and nonlinear optical properties of CuS quantum dots and nanoparticles prepared through a nontoxic, green, one-pot synthesis method. The presence of surface states and defects in the quantum dots are evident from the luminescent behavior and enhanced nonlinear optical properties measured using the open aperture Z-scan, employing 5 ns laser pulses at 532 nm. The quantum dots exhibit large effective third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 2.3 J cm⁻², and the optical nonlinearity arises largely from absorption saturation and excited state absorption. Results suggest that these materials are potential candidates for designing efficient optical limiters with applications in laser safety devices.     

An investigation on the defect structures and spin Hamiltonian parameters for the two orthorhombic Ti3+ centers in ZnWO4

By employing the perturbation formulae of the spin Hamiltonian parameters (SHPs) (g factors g_xx, g_yy, g_zz, hyperfine structure constants A_xx, A_yy, A_zz and superhyperfine parameters A_xx׳, A_yy׳, A_zz׳) for a 3d¹ ion in orthorhombically elongated octahedra and tetrahedra, the defect structures and the experimental EPR spectra are theoretically and systematically investigated for the two orthorhombic Ti³⁺ centers C₁ and C₂ in ZnWO₄. Center C₁ is ascribed to the impurity Ti³⁺ at host W⁶⁺ site associated with two nearest neighbor oxygen vacancies due to charge compensation. The resultant tetrahedral [TiO₄]^5– cluster is determined to undergo the local orthorhombic elongation distortion, characterized by the axial distortion angle Δθ (=θ–θ₀≈–6.84°) of the local impurity-ligand bond angle θ related to θ₀ (≈54.74°) and the perpendicular distortion angle Δε (=ε–ε₀≈2.5°) related to ε₀ (≈45°) of an ideal tetrahedron because of the Jahn–Teller effect. Center C₂ is attributed to Ti³⁺ on Zn²⁺ site, and this octahedral [TiO₆]^9– cluster may experience the local axial elongation ΔZ (≈0.001 Ǻ) and the planar bond angle variation Δφ (≈9.1°) due to the Jahn–Teller effect, resulting in a more regular oxygen octahedron. All the calculated SHPs (i.e., g factors for both centers, the hyperfine structure constants for center C₂ and superhyperfine parameters of next nearest neighbor ligand W for center C₁) show good agreement with the observed values. However, the theoretical results based on the previous assignment of center C₁ as Ti³⁺ on W⁶⁺ site with only one nearest planar oxygen vacancy (i.e., five-fold coordinated octahedral [TiO₅]^7– cluster) show much worse agreement with the experimental data. The defect structures and the SHPs (especially the g anisotropies) are discussed for both centers. The present studies on the superhyperfine parameters of ligand W⁶⁺ for center C₁ would be helpful to further investigations on the superhyperfine interactions of cation ligands which were rather scarcely treated before.     

相位校正器粘接局部应力控制技术

通过理论分析,对相位校正器的镜面与支撑结构间的粘接建立模型进行仿真研究,提出了在相位校正器镜片上加工小圆柱,使其粘接应力由镜片本身转移到突出部位的小柱子上,有效改善了相位校正器镜面局部粘接应力,使镜面局部高阶像差得到缓解,并通过试验验证了其有效性。