Interfacial Engineering FeOOH/CoO Nanoneedle Array for Efficient Overall Water Splitting Driven by Solar Energy

Interface engineering has been applied as an effective strategy to boost the electrocatalytic performance because of the strong coupling and synergistic effects between individual components. Here, we engineered vertically aligned FeOOH/CoO nanoneedle array with a synergistic interface between FeOOH and CoO on Ni foam (NF) by a simple impregnation method. The synthesized FeOOH/CoO exhibits outstanding electrocatalytic activity and stability for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. For the overall water splitting, the bifunctional FeOOH/CoO nanoneedle catalyst requires only a cell voltage of 1.58 V to achieve a current density of 10 mA cm⁻², which is much lower than that required for IrO₂//Pt/C (1.68 V). The FeOOH/CoO catalyst has been successfully applied for solar cell-driven water electrolysis, revealing its great potential for commercial hydrogen production and solar energy storage.     

An analysis on the efficiency of Euler's method for computing the matrix pth root

It is shown that the matrix sequence generated by Euler's method starting from the identity matrix converges to the principal pth root of a square matrix, if all the eigenvalues of the matrix are in a region including the one for Newton's method given by Guo in 2010. The convergence is cubic if the matrix is invertible. A modification version of Euler's method using the Schur decomposition is developed. Numerical experiments show that the modified algorithm has the overall good numerical behavior.     

Some Topological Properties of Charming Spaces

In this paper, we mainly discuss the class of charming spaces. First, we show that there exists a charming space such that the Tychonoff product is not a charming space. Then we discuss some properties of charming spaces and give some characterizations of some class of charming spaces. Finally, we show that the Suslin number of an arbitrary charming rectifiable space is countable.     

2D graphene oxide-l-arginine-soybean lecithin nanogenerator for synergistic photothermal and NO gas therapy

Nitric oxide (NO) gas therapy has been regarded as a promising strategy for cancer treatment. However, its therapeutic efficiency is still unsatisfying due to the limitations of monotherapy. Previous preclinical and clinical studies have shown that combination therapy could significantly enhance therapeutic efficiency. Herein, a graphene oxide (GO)-l-arginine (l-Arg, a natural NO donor) hybrid nanogenerator is developed followed by surface functionalization of soybean lecithin (SL) for synergistic enhancement of cancer treatment through photothermal and gas therapy. The resultant GO-Arg-SL nanogenerator not only exhibited good biocompatibility and excellent endocytosis ability, but also exhibited excellent photothermal conversion capability and high sensitivity to release NO within tumor microenvironment via inducible NO synthase (iNOS) catalyzation. Moreover, the produced hyperthermia and intracellular NO could synergistically kill cancer cells both in vitro and in vivo. More importantly, this nanogenerator can efficiently eliminate tumor while inhibiting the tumor recurrence because of the immunogenic cell death (ICD) elicited by NIR laser-triggered hyperthermia and the immune response activation by massive NO generation. We envision that the GO-Arg-SL nanogenerator could provide a potential strategy for synergistic photothermal and gas therapy.     

Experimental study on synchrotron radiation photoionization of secondary organic aerosol derived from styrene ozonolysis

Secondary organic aerosol (SOA) produced by ozonolysis of styrene and other alkene compounds is a major part of fine particles in urban atmospheres. The atmospheric ozonolysis process of styrene is simulated in a smog chamber, and the formed SOA particles are detected on-line by a synchronous radiation vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) in this study. Through molecular ion peaks in the photonionization mass spectra of SOA and the corresponding photoionization efficiency curve, combined with off-line measurement verification of ultraviolet visible and infrared absorption spectra, it is determined that formaldehyde, formic acid, benzene, phenol, benzaldehyde, and benzoic acid are the main constituents of styrene SOA. These provide new information for studying the atmospheric ozonolysis oxidation mechanism of styrene. VUV-PIMS can get over complicated sample preparation procedures, secondary pollution, and other shortcomings of the off-line method and is a useful instrument to measure constituents and unveil the formation process of SOA particles.     

Nafion covered core–shell structured Fe3O4@graphene nanospheres modified electrode for highly selective detection of dopamine

Nafion covered core–shell structured Fe₃O₄@graphene nanospheres (GNs) modified glassy carbon electrode (GCE) was successfully prepared and used for selective detection dopamine. Firstly, the characterizations of hydro-thermal synthesized Fe₃O₄@GNs were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Then Fe₃O₄@GNs/Nafion modified electrode exhibited excellent electrocatalytic activity toward the oxidations of dopamine (DA). The interference test showed that the coexisted ascorbic acid (AA) and uric acid (UA) had no electrochemical interference toward DA. Under the optimum conditions, the broad linear relationship was obtained in the experimental concentration from 0.020 μM to 130.0 μM with the detection limit (S/N = 3) of 0.007 μM. Furthermore, the core–shell structured Fe₃O₄@GNs/Nafion/GCE was applied to the determination of DA in real samples and satisfactory results were got, which could provide a promising platform to develop excellent biosensor for detecting DA.     

A study of the photodeposition over Ti/TiO2 electrode for electrochemical detection of heavy metal ions

Here we reported that UV light irradiation can significantly enhance sensitivity of Ti/TiO₂ electrode for determination of trace heavy metal ions (such as Cu^2 +, Pb^2 + and Cd^2 +) owing to the photodeposition of metal ions on the surface of electrodes. The sensitivity of heavy metal ions can be selectively enhanced over the Ti/TiO₂ electrode, which is attributed to matching between potential of heavy metal ions and the position of the conduction band of TiO₂.     

硅衬底氮化镓基LED薄膜转移至柔性黏结层基板后其应力及发光性能变化的研究

本文将硅(Si)衬底上外延生长的氮化镓(GaN)基发光二极管(LED)薄膜转移至含有柔性黏结层的基板上, 获得了不受衬底和支撑基板束缚的LED薄膜. 利用高分辨率X射线衍射仪(HRXRD)研究了薄膜转移前后的应力变化, 同时对其光致发光(PL)光谱的特性进行了研究. 结果表明: 硅衬底GaN基LED薄膜转移至柔性基板后, GaN受到的应力会由转移前巨大的张应力变为转移后微小的压应力, InGaN/GaN量子阱受到的压应力则增大; 尽管LED薄膜室温无损转移至柔性基板其InGaN阱层的In组分不会改变, 然而按照HRXRD倒易空间图谱通用计算方法会得出平均铟组发生了变化; GaN基LED薄膜从外延片转移至柔性基板时其PL谱会发生明显红移.     

Visible‐light photocatalytic activity of Ag@MIL‐125(Ti) microspheres

Ag nanoparticle (NP)‐decorated MIL‐125(Ti) microspheres (Ag@MIL‐125(Ti)) were firstly fabricated via a facile hydrothermal and following photo‐reduction method. The photocatalysts were characterized using X‐ray diffraction, scanning and transmission electron microscopies, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The characterization results indicated that Ag NPs were dispersed on the surface of MIL‐125(Ti) microspheres, and the Ag NPs had a uniform diameter of about 40 nm. The composites exhibited excellent visible‐light absorption, due to the modification with the Ag NPs. The photocatalytic activity for the visible‐light‐promoted degradation of Rhodamine B was improved through the optimization of the amount of Ag loaded as a co‐catalyst, this amount being determined as 3 wt%. Additionally, studies performed using radical scavengers indicated that O₂^? and e^? served as the main reactive species. The catalyst can be reused at least five times without significant loss of its catalytic activity. Furthermore, a photocatalytic mechanism for degradation of organics over Ag@MIL‐125(Ti) is also proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on the Molecular Chain Conformation Stability of Aminated Konjac Glucomannan

Konjac glucomannan （KGM） was aminated by 2-chloroethyl-amine （CEA） as reagent so as to study the influence of concentration of CEA （based on the amount of KGM）, concentration of NaOH, reaction time and temperature on the extent of amination. And the molecular simulation technology was adopted to analyze the conformation stability of aminate （AKGM）. The results indicate that when the amount of CEA is higher, the extent of amination is higher. The optimum concentration of NaOH, reaction time and temperature are 10% NaOH, 70 ℃ and 45 rain, respectively. IR shows KGM is successfully aminated. The conformation of AKGM is in a random clew-like shape.