One‐pot self‐assembly and photoreduction synthesis of silver nanoparticle‐decorated reduced graphene oxide/MIL‐125(Ti) photocatalyst with improved visible light photocatalytic activity

In recent years, tremendous research efforts have been made towards developing metal–organic framework (MOF)‐based composites for photocatalytic applications. In this work, bipyramid‐like MIL‐125(Ti) frustum enwrapped with reduced graphene oxide (rGO) and dispersed silver nanoparticles (Ag NPs) was fabricated using an efficient one‐pot self‐assembly and photoreduction strategy. The as‐obtained materials were characterized using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, nitrogen adsorption–desorption isotherms, and X‐ray photoelectron, ultraviolet–visible diffuse reflectance and photoluminescence spectroscopies. It is found that the as‐prepared Ag/rGO/MIL‐125(Ti) ternary hybrids have large surface area, microporous structure, enhanced visible light absorption and prolonged lifetime of charge carriers. Compared with pure MIL‐125(Ti) and its binary counterparts, the ternary composite exhibits more efficient photocatalytic performance for Rhodamine B (RhB) degradation from water under visible light irradiation. The photodegradation rate of RhB on Ag/rGO/MIL‐125(Ti) is 0.0644 min^?1, which is 1.62 times higher than that of the pure MIL‐125(Ti). The improved photocatalytic performance is ascribed to the indirect dye photosensitization, the Ag NP localized surface plasmon resonance, the Ti³⁺–Ti⁴⁺ intervalence electron transfer and the synergistic effect among MIL‐125(Ti), Ag NPs and rGO. Ag NPs serve as an efficient ‘electron reservoir’ and rGO as an electron transporter and collector. Therefore, this work provides a new pathway into the design of MOF‐based composites for application in environmental and energy fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Noble Metals Can Have Different Effects on Photocatalysis Over Metal–Organic Frameworks (MOFs): A Case Study on M/NH2‐MIL‐125(Ti) (M=Pt and Au)

M‐doped NH₂‐MIL‐125(Ti) (M=Pt and Au) were prepared by using the wetness impregnation method followed by a treatment with H₂ flow. The resultant samples were characterized by powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), X‐ray absorption fine structure (XAFS) analyses, N₂‐sorption BET surface area, and UV/Vis diffuse reflectance spectroscopy (DRS). The photocatalytic reaction carried out in saturated CO₂ with triethanolamine (TEOA) as sacrificial agent under visible‐light irradiations showed that the noble metal‐doping on NH₂‐MIL‐125(Ti) promoted the photocatalytic hydrogen evolution. Unlike that over pure NH₂‐MIL‐125(Ti), in which only formate was produced, both hydrogen and formate were formed over Pt‐ and Au‐loaded NH₂‐MIL‐125(Ti). However, Pt and Au have different effects on the photocatalytic performance for formate production. Compared with pure NH₂‐MIL‐125(Ti), Pt/NH₂‐MIL‐125(Ti) showed an enhanced activity for photocatalytic formate formation, whereas Au has a negative effect on this reaction. To elucidate the origin of the different photocatalytic performance, electron spin resonance (ESR) analyses and density functional theory (DFT) calculations were carried out over M/NH₂‐MIL‐125(Ti).The photocatalytic mechanisms over M/NH₂‐MIL‐125(Ti) (M=Pt and Au) were proposed. For the first time, the hydrogen spillover from the noble metal Pt to the framework of NH₂‐MIL‐125(Ti) and its promoting effect on the photocatalytic CO₂ reduction is revealed. The elucidation of the mechanism on the photocatalysis over M/NH₂‐MIL‐125(Ti) can provide some guidance in the development of new photocatalysts based on MOF materials. This study also demonstrates the potential of using noble metal‐doped MOFs in photocatalytic reactions involving hydrogen as a reactant, like hydrogenation reactions.     

Preparation of BiVO4/MIL‐125(Ti) composite with enhanced visible‐light photocatalytic activity for dye degradation

Because of their desired features, including very specific surface areas and designable framework architecture together with their possibility to be functionalized, Metal Framework (MOF) is a promising platform for supporting varied materials in respect of catalytic applications in water treatment. In this work, a novel visible‐light‐responsive photocatalyst that comprised BiVO₄ together with MIL‐125(Ti), was synthesized by a two‐step hydrothermal approach. The characterization of as‐obtained samples as performed by X‐ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy and ultraviolet‐visible diffuse reflection spectra. Rhodamine B was selected being a target for the evaluation of the photocatalytic function of as‐developed photocatalyst. The photocatalytic reaction parameters, for example, the content of BiVO₄ as well as initial concentration of Rhodamine B was researched. The composite photocatalyst possessing Bi:Ti molar ratio of 3:2 brought to light the fact that the greatest photocatalytic activity had the ability to degrade 92% of Rhodamine B in 180 min. In addition to that, the BiVO₄/MIL‐125(Ti) composite could keep its photocatalytic activity during the recycling test. The phenomenon of disintegration of the photo‐generated charges in the BiVO₄/MIL‐125(Ti) composite was brought to discussion as well.     

Metal–organic framework MIL‐125(Ti) for efficient adsorptive removal of Rhodamine B from aqueous solution

A metal–organic framework material, MIL‐125(Ti), was solvothermally prepared and characterized using X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and surface area measurements. MIL‐125(Ti) was then used as an adsorbent for Rhodamine B (RhB) removal in aqueous solution. The adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were studied in detail. The maximum adsorption capacity of MIL‐125(Ti) for RhB was 59.92 mg g^?1. MIL‐125(Ti) appears to be a promising material for RhB adsorption from aqueous solutions. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of V5+‐doped Ag/AgCl photocatalysts with enhanced visible light photocatalytic activity

V⁵⁺‐doped Ag/AgCl photocatalysts were prepared via the ion exchange method. The catalysts were characterized using X‐ray diffractometry, transmission electron microscopy, and energy‐dispersive X‐ray, X‐ray photoelectron, Fourier transform infrared and ultraviolet–visible spectroscopies. The V⁵⁺‐doped Ag/AgCl photocatalysts show much higher photocatalytic activities than Ag/AgCl under visible light irradiation for methyl orange (MO) decomposition. Especially, the 2.0 wt% V⁵⁺‐doped Ag/AgCl photocatalyst shows the highest photocatalytic activity and also high stability after five cycles. The MO degradation rate during each cycle is almost maintained at 97%. Electron spin resonance spectroscopy and radical trapping experiments reveal that holes play an important role in the photocatalytic process.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

F‐doped Ag/AgBr with enhanced visible‐light photocatalytic activity and mechanism

Novel F‐doped Ag/AgBr photocatalysts containing various amounts of F^? were synthesized by an ion exchange method. The photocatalysts were characterized using X‐ray diffraction (XRD), scanning and transmission electron microscopies, X‐ray photoelectron, ultraviolet–visible absorption and photoluminescence spectroscopies and electron spin resonance (ESR). Powder XRD revealed that F^? was inserted into the crystal lattices of AgBr and partially replaced Br^?, resulting in the contraction of the AgBr lattices. Methyl orange photodegradation experiments showed that the photocatalytic activity of F‐doped Ag/AgBr was significantly dependent on the amount of F^?. Ag/AgBr doped with 0.02 M F^? achieved the highest activity of 91% after 8 min. ESR showed the main active species in methyl orange degradation was ^?OH. The main enhancement mechanism is that F^? inhibits the recombination of electron–hole pairs.     

Micelle‐Directing Synthesis of Ag‐Doped WO3 and MoO3 Composites for Photocatalytic Water Oxidation and Organic‐Dye Adsorption

In this paper, an Ag‐doped WO₃ (and MoO₃) composite has been prepared by following a simple micelle‐directed method and high‐temperature sintering route. The as‐prepared samples were characterized by X‐ray diffraction, inductively coupled plasma, transmission electron microscopy, X‐ray photoelectron spectroscopy, UV/Vis diffuse reflectance spectroscopy, Brunauer–Emmett–Teller, photoluminescence spectroscopy, and electrochemical impedance spectroscopy techniques. The photocatalytic experiments reveal that their oxygen‐production rates are up to 95.43 μmol (75.45 μmol) for Ag‐doped WO₃ (MoO₃), which is 9.5 (7.3) times higher than that of pure WO₃: 9.012 μmol (MoO₃: 9.00 μmol) under visible‐light illumination (λ ≥420 nm), respectively. The improvement of their photocatalytic activity is attributed to the enhancement of their visible‐light absorption and the separation efficiency of photogenerated carriers by Ag doping. Moreover, Ag‐doped WO₃ (MoO₃) also shows excellent adsorption of rhodamine B (RhB) and methylene blue (MB) in aqueous solution, with maximum adsorption capacities towards RhB and MB of 822 and 820 mg g⁻¹ for Ag‐doped WO₃, and 642 and 805 mg g⁻¹ for Ag‐doped MoO₃, respectively.     

A New p‐Metal‐n Structure AgBr‐Ag‐BiOBr with Superior Visible‐Light‐Responsive Catalytic Performance

A novel visible‐light‐driven AgBr‐Ag‐BiOBr photocatalyst was synthesized by a facile hydrothermal method. Taking advantage of both p‐n heterojunctions and localized surface plasmon resonance, the p‐metal‐n structure exhibited a superior performance concerning degradation of methyl orange under visible‐light irradiation (λ>420 nm). A possible photodegradation mechanism in the presence of AgBr‐Ag‐BiOBr composites was proposed, and the radical species involved in the degradation reaction were investigated. HO₂^?/^?O₂^? played the same important role as ^?OH in the AgBr‐Ag‐BiOBr photocatalytic system, and both the electron and hole were fully used for degradation of organic pollutants. A dual role of metallic Ag in the photocatalysis was proposed, one being surface plasmon resonance and the other being an electron‐hole bridge. Due to the distinctive p‐metal‐n structure, the visible‐light absorption, the separation of photogenerated carriers and the photocatalysis efficiency were greatly enhanced.     

Electrochemical Fabrication and Properties of Highly Ordered Fe‐Doped TiO2 Nanotubes

Highly‐ordered Fe‐doped TiO₂ nanotubes (TiO₂nts) were fabricated by anodization of co‐sputtered Ti–Fe thin films in a glycerol electrolyte containing NH₄F. The as‐sputtered Ti–Fe thin films correspond to a solid solution of Ti and Fe according to X‐ray diffraction. The Fe‐doped TiO₂nts were studied in terms of composition, morphology and structure. The characterization included scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, UV/Vis spectroscopy, X‐ray photoelectron spectroscopy and Mott–Schottky analysis. As a result of the Fe doping, an indirect bandgap of 3.0 eV was estimated using Tauc’s plot, and this substantial red‐shift extends its photoresponse to visible light. From the Mott–Schottky analysis, the flat‐band potential (E_fb) and the charge carrier concentration (N_D) were determined to be ?0.95 V vs Ag/AgCl and 5.0 ×10¹⁹ cm^?3 respectively for the Fe‐doped TiO₂nts, whilst for the undoped TiO₂nts, E_fb of ?0.85 V vs Ag/AgCl and N_D of 6.5×10¹⁹ cm^?3 were obtained.     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Plant‐supported silver nanoparticles: Efficient,economically viable and easily recoverable catalyst for the reduction of organic pollutants

Ginger rhizome powder was used for the synthesis of supported metallic nanoparticle catalysts. A simple and novel adsorption method was used for the synthesis of silver nanoparticles loaded on ginger powder (Ag/GP), copper on ginger powder (Cu/GP) and nickel on ginger powder (Ni/GP). Among these, Ag/GP showed selective reduction of methyl orange and was used for further reactions. The prepared nanomaterials were characterized through X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, fourier transform infrared spectroscopy and energy‐dispersive X‐ray spectroscopy. The prepared Ag/GP catalyst was employed in the catalytic reduction of 4‐nitrophenol (4‐NP), 2‐nitrophenol (2‐NP), rhodamine B, methyl red and congo red. Ag/GP showed excellent catalytic reduction activity, the rate constants being 1.26 × 10^?3 and 2.38 × 10^?3 s^?1 for 2‐NP and 4‐NP, respectively. The turnover frequency reached 1.06 min^?1 for 2‐NP and 1.16 min^?1 for 4‐NP when using the Ag/GP catalyst. The prepared Ag/GP catalyst demonstrated outstanding activity for the degradation of a mixed solution of dyes. Also, stability and reusability of the prepared catalyst were investigated, which showed outstanding reusability up to five times and was stable up to five days.     

Facile preparation of Ag/Ag2WO4/g‐C3N4 ternary plasmonic photocatalyst and its visible‐light photocatalytic activity

Introducing plasmonic metals into semiconductor materials has been proven to be an attractive strategy for enhancing photocatalytic activity in the visible region. In this work, a novel and efficient Ag/Ag₂WO₄/g‐C₃N₄ (AACN) ternary plasmonic photocatalyst was successfully synthesized using a facile one‐step in situ hydrothermal method. The composition, structure, morphology and optical absorption properties of AACN were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–visible diffuse reflectance spectroscopy, respectively. Photocatalytic performance of AACN was evaluated via rhodamine B and tetracycline degradation. The results indicated that AACN had excellent photocatalytic performance for rhodamine B degradation with a rate constant of 0.0125 min^?1, which was higher than those of Ag₂WO₄ and Ag/Ag₂WO₄. Characterization and photocatalytic tests showed that the strong coupling effect between the Ag/Ag₂WO₄ nanoparticles and the exfoliated ultrathin g‐C₃N₄ nanosheets was superior for visible‐light responsivity and reduced the recombination rate of photogenerated electrons and holes. A proposed mechanism is also discussed according to the band energy structure and the experimental results.     

Photocatalytic degradation of methyl orange using hematoporphyrin/N‐doped TiO2 nanohybrids under visible light: Kinetics and energy consumption

Various nitrogen‐doped titania particles were prepared and, for visible light sensitizing, the biological pigment hematoporphyrin was grafted onto their surfaces. The nanohybrid products were characterized using X‐ray diffraction, Fourier transform infrared and ultraviolet–visible spectroscopies and Brunauer–Emmett–Teller surface area analysis. A high‐performance visible light helical flow photoreactor was designed and used for the photocatalytic degradation of methyl orange (MO) over these photocatalyst products. Accordingly, response surface methodology was employed for design of experiments and optimization. The influencing parameters were initial N/Ti molar ratio, dosage of nanohybrids and solution pH. These parameters were statistically significant and a quadratic correlation was developed for degradation efficiency (DE) variations. A maximum DE of 89.2% was attainable, after 60 min treatment, under the optimum conditions of initial N/Ti molar ratio of 4.93 (ca 5), nanohybrid dosage of 0.73 g l⁻¹ and pH of 4.8. The MO degradation kinetics over the catalyst surface followed the modified Langmuir–Hinshelwood model. The important role of hydroxyl radicals was confirmed using mannitol scavenger. Performing the photocatalytic reaction with the developed set‐up showed excellent efficiency and energy consumption in comparison with similar processes.     

Visible‐Light Photocatalytic Hydrogen Production Activity of ZnIn2S4 Microspheres Using Carbon Quantum Dots and Platinum as Dual Co‐catalysts

ZnIn₂S₄ microspheres (ZIS MSs) were for the first time decorated with carbon quantum dots (CQDs) and platinum nanoparticles (NPs) as dual co‐catalysts of for photocatalytic H₂ production. The ZIS MSs co‐loaded with CQDs and Pt exhibited a high photocatalytic H₂ production rate of 1032.2 μmol h^?1 g^?1 with an apparent quantum efficiency of 2.2 % (420 nm) in triethanolamine aqueous solution under visible‐light irradiation, which was much higher than the respective photocatalytic rates of pure ZIS, Pt loaded ZIS, and CQDs‐decorated ZIS. Such a great enhancement was attributed to the integrative effect of good crystallization, enhanced light absorption, high electrical conductivity of CQDs, and the vectorial electron transfer from ZIS to CQDs and Pt NPs (ZIS→CQDs→Pt).     

Photocatalyzed Hydrogen Evolution from Water by a Composite Catalyst of NH2‐MIL‐125(Ti) and Surface Nickel(II) Species

A composite of the metal–organic framework (MOF) NH₂‐MIL‐125(Ti) and molecular and ionic nickel(II) species, catalyzed hydrogen evolution from water under UV light. In 95 v/v % aqueous conditions the composite produced hydrogen in quantities two orders of magnitude higher than that of the virgin framework and an order of magnitude greater than that of the molecular catalyst. In a 2 v/v % water and acetonitrile mixture, the composite demonstrated a TOF of 28 mol H₂ g(Ni)^?1 h^?1 and remained active for up to 50 h, sustaining catalysis for three times longer and yielding 20‐fold the amount of hydrogen. Appraisal of physical mixtures of the MOF and each of the nickel species under identical photocatalytic conditions suggest that similar surface localized light sensitization and proton reduction processes operate in the composite catalyst. Both nickel species contribute to catalytic conversion, although different activation behaviors are observed.     

Surface Plasmon Resonance‐Enhanced Visible‐NIR‐Driven Photocatalytic and Photothermal Catalytic Performance by Ag/Mesoporous Black TiO2 Nanotube Heterojunctions

Ag/mesoporous black TiO₂ nanotubes heterojunctions (Ag‐MBTHs) were fabricated through a surface hydrogenation, wet‐impregnation and photoreduction strategy. The as‐prepared Ag‐MBTHs possess a relatively high specific surface area of ≈85 m² g^?1 and an average pore size of ≈13.2 nm. The Ag‐MBTHs with a narrow band gap of ≈2.63 eV extend the photoresponse from UV to the visible‐light and near‐infrared (NIR) region. They exhibit excellent visible‐NIR‐driven photothermal catalytic and photocatalytic performance for complete conversion of nitro aromatic compounds (100 %) and mineralization of highly toxic phenol (100 %). The enhancement can be attributed to the mesoporous hollow structures increasing the light multi‐refraction, the Ti³⁺ in frameworks and the surface plasmon resonance (SPR) effect of plasmonic Ag nanoparticles favoring light‐harvesting and spatial separation of photogenerated electron–hole pairs, which is confirmed by transient fluorescence. The fabrication of this SPR‐enhanced visible‐NIR‐driven Ag‐MBTHs catalyst may provide new insights for designing other high‐performance heterojunctions as photocatalytic and photothermal catalytic nanomaterials.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.