Ultra-thin CoAl layered double hydroxide nanosheets for the construction of highly sensitive and selective QCM humidity sensor

To achieve real-time monitoring of humidity in various applications, we prepared facile and ultra-thin CoAl layered double hydroxide (CoAl LDH) nanosheets to engineer quartz crystal microbalances (QCM). The characteristics of CoAl LDH were investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectric spectroscopy (XPS), Brunauer–Emmett–Telle (BET), atomic force microscopy (AFM) and zeta potential. Due to their large specific surface area and abundant hydroxyl groups, CoAl LDH nanosheets exhibit good humidity sensing performance. In a range of 11.3% and 97.6% relative humidity (RH), the sensor behaved an ultrahigh sensitivity (127.8 Hz/%RH), fast response (9.1 s) and recovery time (3.1 s), low hysteresis (3.1%RH), good linearity (R² = 0.9993), stability and selectivity. Besides, the sensor can recover the initial response frequency after being wetted by deionized water, revealing superior self-recovery ability under high humidity. Based on in-situ Fourier transform infrared spectroscopy (FT-IR), the adsorption mechanism of CoAl LDH toward water molecules was explored. The QCM sensor can distinguish different respiratory states of people and wetting degree of fingers, as well as monitor the humidity in vegetable packaging, suggesting excellent properties and a promising application in humidity sensing.     

Evaluation of the stability of shortcut nitrification-denitrification process based on online specific oxygen uptake rate monitoring

Shortcut nitrification-denitrification (SCND) is widely concerned because of its low energy consumption and high nitrogen removal efficiency. However, the current difficulty lies in the stable maintenance of SCND performance, which leads to the challenge of large-scale application of this new denitrification technology. In this study, the nitrogen removal pathway from complete nitrification-denitrification (CND) to SCND was rapidly realized under high free ammonia (FA), high pH and low dissolved oxygen (DO) conditions. The variations of specific oxygen uptake rate (SOUR) of activated sludge in both processes were investigated by an online SOUR monitoring device. Different curves of SOUR from CND to SCND process were observed, and the ammonia peak obtained based on SOUR monitoring could be used to control aeration time accurately in SCND process. Accordingly, the SOUR ratio of ammonia oxidizing bacteria (AOB) to nitrite oxidizing bacteria (NOB) (SOUR_AOB/SOUR_NOB) was increased from 1.40 to 2.93. 16S rRNA Miseq high throughput sequencing revealed the dynamics of AOB and NOB, and the ratio of relative abundance (AOB/NOB) was increased from 1.03 to 3.12. Besides, SOUR_AOB/SOUR_NOB displayed significant correlations to ammonia removal rate (P<0.05), ammonia oxidation rate / nitrite oxidation rate (P < 0.05), nitrite accumulation rate (P < 0.05) and the relative abundance of AOB/NOB (P < 0.05). Thus, a strategy for evaluation the SCND process stability based on online SOUR monitoring is proposed, which provides a theoretical basis for optimizing the SCND performance.     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体。DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展。研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能。本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料的DNA生物传感器的最新进展,最后展望了DNA生物传感器的应用前景。     

Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

材料化学课程思政的探索与实践*——以“常见金属材料”为例

以“金属材料”中的“常见金属材料”为例,从教学内容和教学评价2个方面探讨了材料化学课程的思政教学。从铝合金、铜合金、钢铁等几种常见金属材料的生产、应用等方面将教学内容与思政元素有机融合,在教学评价中融入思政教育,增强学生的创新创业意识、环境保护意识、资源保护意识、民族自豪感和社会责任感,践行“立德树人”的教育理念。     

纳米银/二维石墨相氮化碳/还原氧化石墨烯复合材料的制备及其光催化降解抗生素

为优化石墨相氮化碳(g-C₃N₄)光催化剂的结构,改善其对污染物的降解性能,本文以三聚氰胺为前驱体,通过高温煅烧和热氧化剥离制备了二维石墨相氮化碳(2D-C₃N₄),并用光还原法一步合成纳米银/二维石墨相氮化碳/还原氧化石墨烯(Ag/2D-C₃N₄/rGO)复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)、X射线光电子能谱(XPS)、氮气吸附脱附等温曲线(BET)等对材料进行表征。 以头孢曲松钠为目标污染物,探究pH值、催化剂用量、头孢曲松钠初始浓度等因素对催化剂的吸附、降解性能的影响,并探究降解反应机理。 当pH=6.0,催化剂用量为0.3 g/L,头孢曲松钠初始浓度为10.0 mg/L时,复合材料对头孢曲松钠的降解率可达到89.1%。 催化剂的稳定性较强,具有实际应用价值,可用于处理含头孢类抗生素的废水。     

材料化学课程教学改革的实践与探索*

材料化学是一门新兴的交叉学科,其教学内容尚未得到一致认同。围绕材料化学专业人才培养的目标,对材料化学课程的教学改革进行了一些探索,如选择合适的教材和教学内容,推动教学方式的现代化、多样化,培养学生实践能力,以及改革创新考核方式等方面。     

一维介观环中持续电流的电子-声子相互作用非经典效应

基于声子相干态功效和计及声子压缩态非经典效应,研究了电子-磁振子和电子-声子相互作用对一维介观环持续电流的影响. 与自由环比较,由于电子-磁振子相互作用,持续电流的振幅呈现指数减小. 对于正常态电子,电子-声子相互作用导致持续电流以Debye-Waller(D-W)因子衰减.但是计入跳步电子-单声子相干态关联效应导致系统本征态能量大幅度下降,从而持续电流I_n有大幅度增加.另一方面计入双声子相干态行为,由于声子压缩态效应压缩电子-相干(态)声子弹性散射行为,导致电子绕环运 关键词： 持续电流 电子-声子相互作用 声子相干态 声子压缩态效应     

Oscillation of a Second-order Impulsive Neutral Differential Equation

Oscillation theorems for a second-order impulsive neutral differential equation are established, which extend the main results developed by Li et alLi et al, Oscillation of second order self-coajugate differential equation with impuls[es. J Comput Appl Math 197（2006）： 78-88] to the considered equation. Two examples are also inserted to illustrate our main results.     

Fixed points of meromorphic functions and of their differences,divided differences and shifts

Let f(z) be a finite order meromorphic function and let c∈C\{0} be a constant.If f(z)has a Borel exceptional value a∈C,it is proved that max{τ(f(z)),τ(△_cf(z))}=max{τ(f(z)),τ(f(z+c))}=max{τ(△_cf(z)),τ(f(z+c))}=σ(f(z)).If f(z) has a Borel exceptional value b∈(C\{0})∪{∞},it is proved that max{τ(f(z)),τ(△cf(z)/f(z))}=max{τ(△cf(z)/f(z)),τ(f(z+c))}=σ(f(z)) unless f(z) takes a special form.Here τ(g(z)) denotes the exponent of convergence of fixed points of the meromorphic function g(z),and σ(g(z)) denotes the order of growth of g(z).