Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

GAMLSS模型在车险定价中的应用

在系统梳理国内外非寿险产品费率厘定方法的基础上,详细介绍了GAMLSS模型,证明了在位置参数和尺度参数的预测中均引入随机效应的GAMLSS模型可更有效地解释纵向数据中个体间的异质性.最后将GAMLSS模型应用于一组纵向车辆保险数据,计算了先验保费、后验保费、后验风险保费和奖惩因子.实证结果表明,GAMLSS模型不仅可为非寿险产品的定价提供依据,而且使风险分类更加稳定、合理.     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

静电陀螺仪MUM小角度读取的相关技术研究

讨论了同步解调法实现静电陀螺仪质量不平衡调制（MUM，Mass-Unbalanced Modulation）小角度读取的原理，分析了影响读取分辨率的各种因素，并对其实施方案中的相关技术进行了探讨。研究表明，尽管MUM读取方案非常适用于实心转子静电陀螺仪，但前提是将其小角度读取的分辨率提高到可与光电方法相比的水平（角秒级）。要实现这一目标，首先要保证转子和电极的机械特性达到一定要求；在此基础上，还要在支承系统的结构、转子位移测量电路设计等方面进行精心设计。     

Narrow band quantitative and multivariate electroencephalogram analysis of peri-adolescent period

ABSTRACT: BACKGROUND: The peri-adolescent period is a crucial developmental moment of transition from childhood to emergent adulthood. The present report analyses the differences in Power Spectrum (PS) of the Electroencephalogram (EEG) between late childhood (24 children between 8 and 13 years old) and young adulthood (24 young adults between 18 and 23 years old). RESULTS: The narrow band analysis of the Electroencephalogram was computed in the frequency range of 0--20 Hz. The analysis of mean and variance suggested that six frequency ranges presented a different rate of maturation at these ages, namely: low delta, delta-theta, low alpha, high alpha, low beta and high beta. For most of these bands the maturation seems to occur later in anterior sites than posterior sites. Correlational analysis showed a lower pattern of correlation between different frequencies in children than in young adults, suggesting a certain asynchrony in the maturation of different rhythms. The topographical analysis revealed similar topographies of the different rhythms in children and young adults. Principal Component Analysis (PCA) demonstrated the same internal structure for the Electroencephalogram of both age groups. Principal Component Analysis allowed to separate four subcomponents in the alpha range. All these subcomponents peaked at a lower frequency in children than in young adults. CONCLUSIONS: The present approaches complement and solve some of the incertitudes when the classical brain broad rhythm analysis is applied. Children have a higher absolute power than young adults for frequency ranges between 0-20 Hz, the correlation of Power Spectrum (PS) with age and the variance age comparison showed that there are six ranges of frequencies that can distinguish the level of EEG maturation in children and adults. The establishment of maturational order of different frequencies and its possible maturational interdependence would require a complete series including all the different ages.     

Synthesis, Crystal Structure, and Biological Activity of Naphthalen-2-y1-4-methyl-1,2,3-thiadiazole-5-carboxylate

The title compound naphthalen-2-y1-4-methy1-1,2,3-thiadiazole-5-carboxylate(C14H10N2O2S,Mr = 270.31)was synthesized by the reaction of 4-methyl-1,2,3-thiadiazole-5-carbonyl chloride with 2-naphthol,and its structure was characterized by IR,1H NMR,high-resolution mass spectrometry and single-crystal X-ray diffraction.The crystal belongs to orthorhombic,space group Pbcn with a = 23.475(5),b = 9.6640(19),c = 10.814(2)(A°),β = 90.00°,Z= 8,V= 2453.2(9)(A°)3,Mr = 270.30,Dc = 1.464 g/cm3,μ= 0.262 mm-1,F(000)= 1120,R = 0.0444 and wR = 0.1099.X-ray analysis revealed that the thiadiazole and naphthalene rings were non-planar,while,the thiadiazole ring and the ester group were essentially planar,and two intermolecular hydrogen bonds C(6)-H(6)…O(1)and C(14)-H(14)…O(1)were observed.The preliminary biological test showed that the title compound had antifungal and antivirus activities against tobacco mosaic virus.     

以纤维素/AmimCl溶液制备纤维素气凝胶

利用离子液体AmimCl溶解结合超临界CO2干燥的方法制备了纤维素气凝胶材料.研究了不同初始浓度的纤维素溶液及其在不同凝固浴中制备的纤维素凝胶的流变行为,进一步考察了纤维素溶液浓度和凝固浴种类对纤维素气凝胶材料结构的影响.结果表明,随着初始纤维素溶液浓度的增大,气凝胶的孔结构逐渐致密,比表面积随之减小;凝固浴的组成对纤维素气凝胶的结构也有较大影响.采用适当的制备条件,可以制备出高比表面积的纤维素气凝胶材料.对纤维素气凝胶的热性能进行了表征,结果表明所得到的气凝胶材料具有较好的热稳定性和较高的炭残余含量.     

微波水热时间对C/C复合材料结构和抗氧化性能的影响

以磷酸、B4C和Al2O3为原料,采用一种新的微波水热法对C/C复合材料基体进行了抗氧化改性,重点研究了微波水热时间对改性试样物相组成、微观结构和抗氧化性能的影响。采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、能量色散谱仪(EDS)及X射线光电子能谱(XPS)对改性后试样进行了表征。结果表明:改性后复合材料表面覆盖了一层由熔融态的HPO3、B2O3和结晶的Al(PO3)3、微量B4C粒子组成的涂层。经60~120 min的微波水热改性,复合材料的抗氧化性能随着微波水热处理时间的延长而改善,达到一定程度后,其变化不再明显。微波水热处理100 min后的试样抗氧化性能最佳,在600℃静态空气气氛下氧化16 h后,氧化失重仅为9.5×10-4 g.cm-2,氧化失重速率维持在4.46×10-5 g.cm-2.h-1的极低水平。     

Ti:Al2O3纳米粉体的共沉淀法合成及表征

本文采用共沉淀法合成了Ti:Al2O3纳米粉体.利用热重/差热(TG/DTA)/X射线衍射(XRD)/红外光谱(FTIR)/扫描电镜(SEM)以及能谱(EDS)等分析方法对合成的Ti:Al2O3纳米粉体进行了表征.结果分析表明:前驱体在1200℃下,保温1h可以得到纯的α-Al2O3晶相;粉体的粒径均匀、分散性好,平均粒径在25～50 nm之间.