Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Graphene and graphene like 2D graphitic carbon nitride: Electrochemical detection of food colorants and toxic substances in environment

Excessive consumption of substances such as food colorants, exposure to doses of metal ions, antibiotic residues and pesticides residues above maximum tolerance limit have a detrimental effect on human health. Hence in detecting these harmful substances, the development of sensitive, selective and convenient analytical tools is an essential step. Graphene and graphene like 2D graphitic carbon nitride have shown great promise in the development of electrochemical sensors for determining the levels of these substances in different samples. In this paper, graphene and graphene like 2D graphitic carbon nitride applications on the determination of various food colorants in foods and drinks such as azo dyes (tartrazine, allura red, amaranth, carmine and sunset yellow); metal ions contaminants, antibiotic and pesticide residues in the environment are reviewed.     

Theoretical study on the catalytic properties of single-atom catalyst stabilised on silicon-doped graphene sheets

ABSTRACT

The stable configurations, electronic structures and catalytic activities of single-atom metal catalyst anchored silicon-doped graphene sheets (3Si-graphene-M, M?=?Ni and Pd) are investigated by using density functional theory calculations. Firstly, the adsorption stability and electronic property of different gas reactants (O₂, CO, 2CO, CO/O₂) on 3Si-graphene-M substrates are comparably analysed. It is found that the coadsorption of O₂/CO or 2CO molecules is more stable than that of the isolated O₂ or CO molecule. Meanwhile, the adsorbed species on 3Si-graphene-Ni sheet are more stable than those on the 3Si-graphene-Pd sheet. Secondly, the possible CO oxidation reactions on the 3Si-graphene-M are investigated through Eley–Rideal (ER), Langmuir–Hinshelwood (LH) and new termolecular Eley–Rideal (TER) mechanisms. Compared with the LH and TER mechanisms, the interaction between 2CO and O₂ molecules (O₂?+?CO → CO₃, CO₃?+?CO → 2CO₂) through ER reactions (< 0.2?eV) are an energetically more favourable. These results provide important reference for understanding the catalytic mechanism for CO oxidation on graphene-based catalyst.     

Morse parameters for the interaction of metals with graphene and silicene

We present Morse parameters for the interaction of graphene and silicene surfaces with the atoms of practically important metals Ni, Ag, and Li. The parameters' values are derived from the dispersion corrected density functional calculations. Two possible cases of $s{p}^2$-hybridized C/Si atoms in the unbroken graphene/silicene sheets and sp-hybridized atoms near the vacancies are considered. Proposed Morse parameters' sets reproduce binding energies, bond lengths and oscillation frequencies of metal atoms adsorbed on the hollow positions over the rings of C₆₀ and Si₆₀ fullerenes. They also reproduce well the same quantities for the substituted C₅₉M and Si₅₉M fullerenes (M?=?Ni, Ag, Li).     

TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

Electronic transport on graphene armchair-edge nanoribbons with Fermi velocity and potential barriers

The transport properties of Dirac fermions through armchair-edge graphene nanoribbons (AGNRs) with a single and double rectangular Fermi velocity $v_F$ and electrostatic potential U barriers is investigated. We employ a transfer matrix method (TMM) to compute the transmission coefficient of the full set of propagating mode which is used to obtain the conductance and Fano factor spectra for both metallic and semiconducting nanoribbons. We show that a reduced Fermi velocity within the barrier region can partially suppress the backscattering resulting from the electrostatic potential. In a double barrier structure, the emergence of high-order transmitting modes is shown to substantially reduce the Fano factor in the spectral region around U. These results indicate that the simultaneous tuning of $v_F$ and U in barrier regions can be explored to control the electronic transport in graphene-based nanoelectronics structures.     

GOSs-稀土配合物紫外增强材料的光谱分析与稳定性研究

氧化石墨烯薄片(GOSs)作为一种新型的二维片状材料,具有较高的比表面积、丰富的表面含氧官能团以及良好的光热稳定性。而稀土配合物通过无机稀土元素与有机配体的结合表现出优异的荧光特性。为了将两类材料具有的物化特性结合起来应用于紫外光谱探测领域。选取了合适的有机配体啉菲罗啉(1,10-邻二氮杂菲,phen)、2’2-联嘧啶(bpm)作为桥联分子,把氧化石墨烯(GOSs)与稀土配合物通过氢键自组装作用进行复合,制备了高效稳定可调的GOSs-稀土配合物复合荧光材料GOSs-Eu(BA)3phen和GOSs-Eu(TTA)3bpm,并且制备了相应的聚乙烯醇(PVA)共混紫外增强薄膜,对其光谱特性与稳定性进行了深入的研究。采用红外光谱、扫描电镜和金相显微镜等方法,对紫外增强材料进行了性能表征。采用吸收光谱,荧光光谱等方法,对紫外增强薄膜进行了性能表征。此外,通过热重测试(TGA)表征了GOSs氢键复合前后紫外增强材料的热稳定性,通过荧光强度-紫外光照次数表征了GOSs氢键复合前后紫外增强薄膜的光稳定性。红外光谱分析发现,进行配位前后有机配体的特征峰产生了频移,表明稀土配合物中Eu 3+与配体之间存在着明显的配位作用。在进行复合之后,桥联配体的特征峰也产生了偏移,表明GOSs与稀土配合物通过桥联分子的氢键作用进行了进行复合。吸收光谱与荧光光谱测定结果表明增强薄膜吸收峰在200~400 nm,荧光主峰在612 nm左右,为Eu 3+特征红色荧光峰,且不同配体可以实现不同范围的吸收产生差异化的荧光表现。扫描电镜和金相显微镜清晰地展示了稀土配合物复合前后的微观形貌,即颗粒状稀土配合物附着在石墨烯薄片上。光稳定性测试表明经过GOSs氢键复合之后,Eu(BA)3phen和Eu(TTA)3bpm稀土配合物荧光材料在进行25次荧光强度测试后光漂白程度分别下降了4.26%和6.41%,提高了其光稳定性。热重测试也表明在经过GOSs氢键复合之后,稀土配合物的热稳定性有了很大提高。总之,得益于GOSs和稀土配合物的特性结合,所制备的紫外增强材料表现出优异的荧光特性与稳定性,必将在紫外探测方面有着广阔的应用前景。     

Facile sonochemical synthesis of rutile-type titanium dioxide microspheres decorated graphene oxide composite for efficient electrochemical sensor

In this reports the facile and green synthesis of rutile-type titanium dioxide nanoparticles decorated graphene oxide nanocomposite via the ultrasonication process (frequency: 50 kHz, Power: 100 W/cm² and Ultrasonic type: Ti-horn). Because, the sonochemical synthesis method is simple, non-explosive and harmless method than other conventional technique. Furthermore, the synthesized material was characterized by various analytical techniques including FESEM, EDX, XRD, EIS and electrochemical methods. Then, the synthesized TiO₂ MPs@GOS composite was applied for the electrocatalytic detection of theophylline (TPL) using CV and amperometric (current-time) techniques. Captivatingly, the modified sensor has excellent electrocatalytic performance with the wider linear range from 0.02 to 209.6 µM towards the determination of theophylline and the LOD and sensitivity of the modified sensor was calculated as 13.26 nM and 1.183 μA·µM⁻¹·cm⁻², respectively. In addition, a selectivity, reproducibility and stability of the TiO₂ MPs@GOS modified GCE were analyzed towards the determination of theophylline molecule. Finally, the real time application of TiO₂ MPs@GOS modified theophylline sensor was established in serum and drug samples.     

Synthesis and applications of graphene oxide aerogels in bone tissue regeneration: a review

Development of biocompatible porous supports is a promising strategy in the field of tissue engineering for the repair and regeneration of bone tissues with severe damage. Graphene oxide aerogels (GOAs) are excellent candidates for the manufacture of these systems due to their porosity, ability to imitate bone structure, and mechanical resistance, and according to their surface chemical reactivity, they can facilitate osseointegration, osteogenesis, osteoinduction and osteoconduction. In this review, synthesis of GOAs from the most primary source is described, and recent studies on the use of these functionalized carbonaceous foams as scaffolding for bone tissue regeneration are presented.