Effect of hybrid fillers on the mechanical behavior of polypropylene based hybrid composites

The present study investigates the effect of hybrid fillers such as graphene nanoplatelets (GnPs) and Titanium di-oxide (TiO₂) in polypropylene (PP) composites on the mechanical properties. The compatibilizing agent of Maleic anhydride grafted polypropylene (MAPP) are used in the polypropylene based composites to increase the interfacial adhesion between matrix and fillers. The experiments are designed according to L₁₆ orthogonal array (OA) based design of experiments (DOE). The parameters selected for this study are GnPs, TiO₂ and MAPP with four different levels are used.By using Orthogonal array and Taguchi based experimental design, the performance characteristics of tensile modulus, tensile strength, elongation at break and toughness can be analyzed with more objective through a small set of experiments.Taguchi based analysis are used to find out the optimal parameters to maximize the tensile properties for the GnPs and TiO₂ reinforced PP hybrid composites. Further, analysis of variance (ANOVA) is investigated to identify the most significant parameters which influence the mechanical properties.From the analysis it was found that the optimal parameters of 3 ?wt% GnPs, 2 ?wt% TiO₂ and 6 ?wt% MAPP for maximum tensile modulus and tensile strength. The most significant parameter for tensile modulus and tensile strength is GnPs followed by TiO₂ and MAPP according to ANOVA analysis.     

石墨烯玻璃透明薄膜加热特性

Graphene has become a research focus in recent years owing to its excellent characteristics, and glass is a commonly used material with high transparency and low cost. Graphene glass combines the excellent properties of both graphene and glass; graphene glass has not only high thermal conductivity, high electrical conductivity, and good surface hydrophobicity but also exhibits superior electrothermal conversion and wide-spectrum high-light-transmittance characteristics. Therefore, the study of graphene glass films is of theoretical value and practical significance. In this study, a high-purity glass-based (JGS1 quartz glass) multilayer graphene film was developed based on an atmospheric-pressure chemical vapor deposition (APCVD) method, and its electrical characteristics, light transmittance, and electrical heating characteristics were experimentally investigated in detail. The results show that graphene glass with different surface resistance values obtained through direct growth on a high-purity quartz glass substrate using the APCVD method, not only has excellent uniformity and quality, but also has considerably flat and high transmittance across the entire visible light region and exhibits excellent heating performance and fast response time. For graphene glass with a surface resistance of 1500 Ω·sq^-1, the light transmittance can reach 74%, and the saturation temperature can rise to 185 ℃ by applying a bias voltage of 40 V. In addition, when the resistance value of the graphene glass is 420 Ω·sq^-1, the graphene glass reaches a high saturation temperature of 325 ℃ in 40 s, and the corresponding heating rate can exceed 18 ℃·s^-1, achieving a significantly higher heating rate than other heating films at the same voltage. Compared with the polyethylene-terephthalate- (PET-) based and silicon-based graphene films obtained by the transfer, graphene glass has a higher saturation temperature, shorter thermal response time, and faster heating rate. Furthermore, graphene glass exhibits better heating cycle stability and longer-term heating stability at a constant voltage. In addition, an experiment using the graphene glass to thermally tune the wavelength of a vertical-cavity surface-emitting laser was conducted and gave good results. The position of the laser peak controlled by the graphene glass was red-shifted by 1.78 nm by applying a voltage of 20 V, and the wavelength tuning efficiency reached 0.059 nm·℃^-1. Compared with PET-based and silicon-based graphene films, the actual electrical heating capacity of graphene glass increased by 195%. These experimental findings demonstrate that graphene glass transparent films with excellent electric heating characteristics can be used in various transparent electric heating fields and have relatively wide application prospects.     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

基于柠檬酸的石墨烯量子点的制备及其应用

石墨烯量子点（GQDs）是一种新型碳基准零维材料,不但具有石墨烯的独特平面结构,同时具备碳点的量子限制效应和边界效应。GQDs具有独特的光学性质、低毒性、高荧光稳定性和高生物相容性,被广泛应用于检测、传感、催化、细胞成像、药物递送和污染治理等领域。GQDs的合成分为自上而下法和自下而上法,前者将大尺寸的石墨烯、石墨、碳材料切割成纳米级的量子点,后者使用不同的前驱体,通过水热法、热裂解法等方法合成石墨烯量子点。柠檬酸（CA）是一种重要的有机酸,室温下是白色结晶状粉末,是自下而上法合成GQDs的一种常用前驱体,近年来有许多关于以CA为前驱体合成不同GQDs的研究,以CA为前驱体合成的GQDs（CA-GQDs）在生物医药、荧光检测、成像等领域均有应用,具有较好的应用前景。对近年来基于CA的合成方法和具体应用进行了总结和回顾,旨在将现有CA-GQDs的相关成果尽可能汇总和展现,以对相关领域研究工作者提供一定参考,并对未来CA-GQDs较有前景的研究方向进行了展望。     

Detection of bleomycin based on N and S co-doped graphene quantum dots as a fluorescence probeEI北大核心CSCD

N and S co-doped graphene quantum dotsNS-GQDswith excellent fluorescence properties were synthesized by hydrothermal method using citrate and thiourea as ingredientsand were characterized. The fluorescence signal was notably reduced in the presence of single stranded DNAssDNAsince ssDNA can adsorb on the surface of NS-GQDs through p-p stacking interaction. Whereas a significantly restored fluorescence signal was observed in the presence of bleomycinowing to the irreversible cleavage of ssDNA by bleomycin with Fe2+ as cofactor. Thusa fluorescence sensor for bleomycin detection was developed. The linear range was from 1.8 to 1200 nmol/L and the detection limit was 0.25 nmol/L. The method was used to detect bleomycin content in human serum samples with satisfactory results. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Pd nanoparticles on boron doped graphene catalyst for electrochemical detection of hydrogen peroxide prepared by electroless deposition methodEI北大核心CSCD

Taking advantage of large conjugated structure and reductivity of boron-doped graphenethe palladium nanoparticles/boron-doped graphene catalyst was prepared by electroless deposition method using boron-doped graphene as reductant and stabilizer. The average size of palladium nanoparticles highly dispersed on the surface of boron-doped graphene was about 6.5 nm. The electrochemical sensor was prepared by modifying the as-formed catalyst on the surface of glassy carbon electrode. The obtained electrochemical sensor exhibited an excellent electrochemical catalytic activity for H2 O2 . It exhibited high sensitivity with the detection limit as low as 830 nmol/L and good linearity in the range of 2.5-300 μµmol/L for detection of H2 O2 . It could be utilized for the determination of H2 O2 in milk samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

石墨烯包覆天然球形石墨作为锂离子电池的负极材料，是否需要乙炔黑导电剂？

我们通过包覆炭化的方法制备得到了石墨烯包覆的天然球形石墨(G/SG)材料,并使用扫描电子显微镜、X射线衍射仪以及多种电化学测试手段考察了不同石墨烯含量的复合材料的形貌结构及电化学性能。我们发现,在不添加乙炔黑(AB)的情况下,G/SG复合材料表现出较高的首次库伦效率,很好的循环稳定性和高倍率性能。当石墨烯包覆量为1%时,材料50次循环后的可逆容量可与添加10%AB的天然石墨电极(SG)等同;当石墨烯包覆量为2.5%时,材料的比容量完全高于添加10%AB的石墨电极。材料电化学性能的改善归因于石墨烯的包覆。一方面,石墨烯的柔软可变性可以保证天然石墨颗粒在充放电过程中的结构完整性,从而有效改善材料的循环稳定性;另一方面,石墨烯的存在提高了电极的导电性,促进更好导电网络的形成。因此,石墨烯包覆天然球形石墨材料中,石墨烯不仅是活性物质,也发挥导电剂的作用。当添加5%的乙炔黑时,在50 mA·g^-1电流循环50次后,5%G/SG电极的可逆容量从381.1 mAh·g^-1提高到404.5 mAh·g^-1,在1 A·g^-1电流时可逆容量从82.5 mAh·g^-1提高到101.9 mAh·g^-1,这表明G/SG电极仍然需要乙炔黑导电剂。乙炔黑颗粒填充在复合材料的空隙中,通过点接触的形式连接到G/SG颗粒,与石墨烯协同作用形成了更加有效的导电网络。尽管石墨烯包覆和乙炔黑添加对天然石墨电极具有积极的影响,例如增加了天然石墨电极的导电性和储锂性能(包括可逆容量,倍率性能和循环性能),但随着石墨烯或乙炔黑的增加,电极密度通常会降低。因此,在实际应用中应考虑石墨负极材料的质量和体积容量的平衡。这些结果对天然石墨的进一步商业应用具有重要意义。我们的工作为天然石墨电极在锂电池中的电化学行为提供了一种新的认识,并且有助于制备更高性能的负极材料。     

层间共价增强石墨烯材料的构筑、性能与应用

大批量石墨烯可控制备技术的逐渐成熟为实现其宏观组装和应用提供了基础。在众多的组装策略中,调节石墨烯层间的界面相互作用可以直接影响组装体的力学、电学、热学以及渗透等性质,具有重要的意义。石墨烯片层间以共价键连接的层间共价石墨烯材料以其可调的层间距、较强的层间作用力、丰富的功能化、以及可能的原子构型重排等特性,受到了广泛的关注和深入的研究。相比于其他非共价的键合手段,共价连接是一种更为牢固的枢纽。本文中我们将总结讨论层间共价石墨烯材料的构筑方法、性能以及应用。在构筑方法中,依据石墨烯本身的制备方法分为氧化还原法以及化学气相沉积法,而在氧化还原法中,以其宏观材料的形貌分为纸状和纤维状来讨论。接着,我们重点介绍了层间共价对其力学和电学性能的影响,并概述了此类宏观组装体材料的应用。层间共价石墨烯材料继承了石墨烯自身优异的特性,同时也具有宏观组装所赋予的性能,有望在多个领域得到广泛的应用。     

石墨烯纤维材料的化学气相沉积生长方法

石墨烯纤维材料是以石墨烯为主要结构基元沿某一特定方向组装而成或由石墨烯包覆纤维状基元形成的宏观一维材料。根据组成基元的不同可将石墨烯纤维材料分为石墨烯纤维和石墨烯包覆复合纤维。石墨烯纤维材料在一维方向上充分发挥了石墨烯高强度、高导电、高导热等特点,在智能纤维与织物、柔性储能器件、便携式电子器件等领域具有广阔的应用前景。随着化学气相沉积(Chemical Vapor Deposition,CVD)制备石墨烯薄膜技术的发展,CVD技术也逐渐应用于石墨烯纤维材料的制备。利用CVD法制备石墨烯纤维可避免传统纺丝工艺中繁琐的氧化石墨烯(Graphene Oxide,GO)还原过程。同时,通过CVD法直接将石墨烯沉积至纤维表面可以保证石墨烯与纤维基底之间强的粘附作用,提高复合纤维的稳定性,同时可实现对石墨烯质量的有效调控。本文综述了石墨烯纤维材料的CVD制备方法,石墨烯纤维材料优异的力学、电学、光学性质及其在智能传感、光电器件、柔性电极等领域的应用,并展望了CVD法制备石墨烯纤维材料未来的发展方向。     

石墨烯嵌锂的拉曼成像

锂离子电池由于具有高能量密度,高循环寿命,低自放电率的优势,成为当前使用最为广泛的储能器件。层状材料是极为常用的负极材料,其微观嵌锂行为的研究对提高电池的能量密度和循环寿命有重要意义。本工作发展了一种新的平板微电池结构,可用于研究锂离子在各类二维层状纳米材料中的嵌锂行为。我们用机械剥离的单片少层石墨烯为正极,热蒸镀的锂金属为负极,构成石墨烯电池,用恒电压放电的方法进行嵌锂测试。采用拉曼成像技术收集石墨烯G峰信号的空间分布,实现对锂的嵌入过程的显微观测。发现了锂在石墨烯中沿层间扩散迁移,以及石墨烯断层对锂扩散的阻碍作用。这些结果有助于理解放电时锂在石墨烯电极中扩散过程,并且这项研究开发的平板微电池结构可用于多种材料的电化学过程中的微观过程表征,同时可实现与光学、电学、电子显微学等多种表征手段的兼容,具有较好的应用前景。