SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

Processing of lignocellulosic polymer wastes using microwave irradiation

Lignin and mixed lignocellulosic natural polymer wastes have been accumulated in landfills over the past hundred years. These wastes should be processed to produce added- value chemicals and materials. This mini-review presents a brief literature survey related to state-of-the-art methods developed recently by the world research community to solve the problem of rational conversion of lignocellulosic polymer wastes, including production of hydrogen, synthesis gas, phenols, and monomers. The focus is made on microwave and plasma technologies used for lignocellulosic wastes processing.     

Developing the Low-Temperature Oxidation Mechanism of Cyclopentane: An Experimental and Theoretical Study

At present, the reactivity of cyclic alkanes is estimated by comparison with acyclic hydrocarbons. Due to the difference in the structure of cycloalkanes and acycloalkanes, the thermodynamic data obtained by analogy are not applicable. In this study, a molecular beam sampling vacuum ultraviolet photoionization time-of-flight mass spectrometer (MB-VUV-PI-TOFMS) was applied to study the low-temperature oxidation of cyclopentane (CPT) at a total pressure range from 1–3 atm and low-temperature range between 500 and 800 K. Low-temperature reaction products including cyclic olefins, cyclic ethers, and highly oxygenated intermediates (e. g., ketohydroperoxide KHP, keto-dihydroperoxide KDHP, olefinic hydroperoxides OHP and ketone structure products) were observed. Further investigation of the oxidation of CPT – electronic structure calculations – were carried out at the UCCSD(T)-F12a/aug-cc-pVDZ//B3LYP/6-31+ G(d,p) level to explore the reactivity of O₂ molecules adding sequentially to cyclopentyl radicals. Experimental and theoretical observations showed that the dominant product channel in the reaction of CPT radicals with O₂ is HO₂ elimination yielding cyclopentene. The pathways of second and third O₂ addition – the dissociation of hydroperoxide – were further confirmed. The results of this study will develop the low-temperature oxidation mechanism of CPT, which can be used for future research on accurately simulating the combustion process of CPT.     

消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。     

不同Ce/Mn摩尔比对CeO_2-MnO_x催化剂低温NH_3选择性催化还原NO的影响

以高锰酸钾和硝酸锰为锰源,采用改进的共沉淀法制备了不同Ce/Mn摩尔比的Ce O2-Mn Ox催化剂.以NH3为还原剂,考察了催化剂低温(小于150℃)NH3选择性催化还原NO的性能.并采用XRD,BET,H2-TPR,NH3-TPD和XPS等手段对催化剂的物理化学性质进行表征.结果表明,Ce O2-Mn Ox催化剂在50~150℃温度区间内表现出了良好的催化活性.引入适量的Ce可以有效地改变催化剂的晶粒大小,增强其氧化还原能力;而Mn的加入,促进了其低温SCR活性.当Ce/Mn摩尔比为1∶3时(C1M3),低温活性最佳,在82~150℃温度区间内NO去除率达到90%以上,这主要是由于C1M3催化剂有较高含量的表面吸附氧、大量的弱酸性位点、良好的氧化还原性能以及表面较高含量的Mn4+物种.     

锑掺杂对钒钛系催化剂低温脱硝活性的影响

用浸渍法制备Sb-V₂O₅-TiO₂催化剂,在质量分数3%V₂O₅-TiO₂催化剂基础上,研究锑的负载量、焙烧温度对催化剂活性的影响。结果表明,锑的负载量为11%（质量分数）,500 ℃焙烧的催化剂具有最佳的SCR活性,在进口浓度为0.07% NO_x、O₂体积分数5%、空速27 000 h^-1的条件下,170 ℃时脱硝活性可达92%。对催化剂进行H₂-TPR表征,发现锑修饰后的催化剂氧化能力增强,使催化剂效率上升。通过XPS和NH₃-TPD表征测试,催化剂表面的锑主要以五价的形式存在且随着锑负载量的增加催化剂表面酸性增强。考察SO₂和H₂O对催化剂的影响发现,加锑催化剂具有一定的抗硫抗水性能。通过FT-IR、TG、孔隙结构测试表明,锑的加入可以有效地抑制硫酸铵盐在催化剂表面的聚集,从而延长催化剂的寿命。     

非晶态MnO_x/TiO_2催化剂的制备及其低温NH_3-SCR性能

采用自发沉积法、共沉淀法及浸渍法制备MnO_x/TiO_2催化剂,通过XRD、TEM、N2吸附-脱附、XPS、H_2-TPR、NH_3-TPD等一系列表征手段研究MnO_x/TiO_2催化剂的结构与性质,并考察MnO_x/TiO_2催化剂低温NH_3-SCR性能。结果表明,自发沉积法制备的MnO_x/Ti O2(s)催化剂具有完全非晶态结构,Mn和Ti之间存在强相互作用,较共沉淀法制备的MnO_x/TiO_2(c)及浸渍法制备的MnO_x/Ti O2(i)表现出更强的氧化还原能力。MnO_x/TiO_2(s)具有较高的比表面积、较多的表面酸量,有利于NH_3的吸附与活化。且表面高浓度的Mn4+离子及吸附氧,有利于将NO氧化为NO2,促进发生"fast-SCR"反应,进而使其表现出优异的低温脱硝性能。MnO_x/TiO_2(s)催化剂在150℃时NO的转化率高达92.8%,在150-350℃NO的转化率保持在90%以上,此外其还具备较强的抗H_2O和SO_2毒化能力。     

低温烧结NaBi(WO4)2陶瓷的介电性能

采用固相合成法制备了（WO₄）₂（NBW）陶瓷，研究了NBW陶瓷的相结构、形貌、烧结特性和微波介电性能。NBW陶瓷在625~800℃烧结1~4 h能够致密化。X射线衍射表明在625~800℃烧结2 h的NBW陶瓷均为四方晶系白钨矿结构的单相陶瓷。随着烧结温度的提高，NBW陶瓷的介电常数、品质因数（Qf值）先增加后降低，谐振频率温度系数逐渐降低。经650℃烧结2 h获得的NBW陶瓷的介电常数为14.36，Qf值为16 503 GHz，谐振频率温度系数为-1.055×10-5℃^-1。NBW陶瓷与银共烧反应生成Ag₂W₂O₇相，而与Au、Al共烧具备化学兼容性。