Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

含三正辛胺微胶囊对六价铬的富集

本文将对六价铬有效的萃取剂ＴＯＡ（三正辛胺）微胶囊化，制成填充柱型的酸性体系六价铬的富集分离装置。实验结果表明，微胶囊填充柱中每毫升ＴＯＡ对六价铬的最大萃取容量为１５８．０ｇ／ｍＬ，为纯ＴＯＡ液相萃取的４．９倍。微胶囊经碱／水洗涤后，可再生使用。     

A photoemission study of molybdenum hexacarbonyl adsorption and decomposition on TiO2(1 1 0) surface

The adsorption and decomposition of molybdenum hexacarbonyl on (1 1 0) TiO₂ surfaces were studied using both core levels and valence band photoemission spectroscopies. It was found that after an adsorption at 140 K, when going back to room temperature, only a small part of molybdenum compounds, previously present at low temperature, remained on the TiO₂ surface. This indicates that the desorption temperature on such a surface is lower than the decomposition one. The use of photon irradiation to decompose the hexacarbonyl molecule was also studied. It was shown that during such a decomposition molecular fragments were chemisorbed on the surface allowing a higher amount of metal to remain on the surface. It was also shown that it was possible to get rid of adsorbed subcarbonyl groups and to organize the metal atoms by thermal treatments at temperatures as low as 400 K, i.e. much lower than the one needed to obtain the same structures using physical vapour deposition (PVD). Moreover, due to lower used temperatures, this chemical way of deposition allows a better control of the interface than during PVD growth.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

水中铬污染治理的研究进展

综述了水中铬污染治理的研究进展,包括物理法、物理化学法、化学法、电化学法和生物处理法,并分别评述了各种处理方法的优缺点,提出了未来含铬废水治理的发展方向。     

铬（Ⅲ）邻菲咯啉,8—羟基喹啉配合物／Y型分子筛的制备及苯酚催化羟化

制备了铬（Ⅲ）邻菲咯啉，８－羟基喹啉配合物／Ｙ型分子筛，利用元素分析，ＳＥＭ，ＵＶ－ＶｉｓＢＥＴ及ＸＲＤ等方法确定了分子筛选笼中金属配合物的生在及其晶体结构，考察了实验参数对苯酚转化率及产物选择性的影响。     

Ein Beitrag über Oxide vom Typ AMO4 (A = Ti3+, Cr3+; M = Nb5+, Ta5+)

A Contribution on Ternary Oxides of the AMO₄-Type (A = Ti³⁺, Cr³⁺; M = Nb⁵⁺, Ta⁵⁺ ) CrNbO₄, CrTaO₄, TiNbO₄, and TiTaO₄ were prepared by CO₂-laser technique. X-ray single crystal investigations show a random distribution of the metal ions in Rutil type structure, space group D–P4₂/mnm. Calculations of the free energy of reaction between Ti₂O₃ and Nb₂O₅ show higher stability of TiO₂ beside NbO₂. In TiNbO₄ both metals exhibit the oxidation state +4.     

增敏双波长光度法同时测定底泥中的铜和铬

在pH6．4的磷酸二氢钾-磷酸氢二钾缓冲液和CIMAJB、正丁醇、正庚烷组成的微乳液的介质中，水杨基荧光酮与铜（Ⅱ）、铬（Ⅵ）的显色体系灵敏度都有很大提高，选择了合适的测定波长，利用双波长解方程组法同时测定了底泥中的铜和铬。结果令人满意。     

三价铬与丙二酸形成的配合物的热解过程研究

利用热重分析及原位红外光谱等方法，定性、定量地研究了三价铬和丙二酸形成的配合物［Ｃｒ（Ｃ３Ｈ２Ｏ４）（Ｈ２Ｏ）］［Ｃｒ（Ｃ３Ｈ２Ｏ４）２（Ｈ２Ｏ）２］·４Ｈ２Ｏ的热解过程，提出了室温至４００℃下的详细热解途径．基于多种实验结果，分析了螯合物中六员环的化学键断裂方式，并由配合物的快原子轰击质谱（ＦＡＢ－ＭＳ）加以佐证．