X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.     

阳离子交换皂石黏土在基质辅助激光解吸电离飞行时间质谱分析中的应用

将一种人工合成的无机聚合物——蒙脱石皂石黏土（smectite，Sm）应用于基质辅助激光解吸电离飞行时间质谱分析（matrix-assisted laser desorption/ionization time of flight mass spectrometry, MALDI-TOF-MS），以检测糖类化合物。 将传统的有机基质2，4，6-三羟基苯乙酮（trihydroxyacetophenone, THAP）与阳离子交换后的皂石黏土混合制备成新型复合基质，应用于糖类化合物的检测。通过比较不同的制样方法，测定不同分子直径的糖类化合物，发现由于受复合基质晶面间距的限制，只有小分子糖类化合物能进入晶面间隙充分接触有机基质并被离子化，从而实现对小分子糖类化合物的选择性检测。     

新型功能碳材料的高压截获

高性能功能材料在诸多领域具有广泛的应用前景,是人们一直关注的研究热点。高压可以有效地改变物质的原子间距和成键方式,是获得新型功能材料的重要途径。在碳材料的高压研究中,许多有趣的功能碳材料,如光学透明碳、高强度弹性碳和超硬非晶碳等,已经通过不同的碳前驱体合成。本文简要介绍了作者近年来在低维碳基纳米复合材料高压研究中取得的进展,基于设计的不同低维碳前驱体,高压下截获了具有超硬特性、新型压致共价聚合及发光增强的碳材料。     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法， 在这个方法中，正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上，且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面，计算结果和实验数据很好的符合.     

A novel method for determination of inorganic oxyanions by electrospray ionization mass spectrometry using dehydration reactions

Novel methods for the determination of inorganic oxyanions by electrospray (ES) ionization mass spectrometry have been developed using dehydration reactions between oxyanions and carboxylic acids at the ES interface. Twelve oxyanions (VO₃^?, CrO₄^2?, MoO₄^2?, WO₄^2?, BO₃^3?, SiO₃^2?, SiO₄^4?, AsO₄^4?, AsO₂^?, SeO₄^2?, SeO₃^2? and NO₂^?), out of 16 tested, reacted with at least one of four aminopolycarboxylic acids, i.e. iminodiacetic acid (IDA), nitrilotriacetic acid (NTA), trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid and triethylenetetramine‐N,N,N′,N″,N′″,N′″‐hexaacetic acid, at the ES interface to produce the dehydration products that gave intense mass ion responses, sufficient for trace analysis. As examples, trace determinations of Cr^VI and silica in water samples were achieved after online ion exchange chromatography, where the dehydration product of CrO₄^2? and NTA (m/z 290) and that of SiO₄^4? and IDA (m/z 192) were measured. The limits of detection of the respective methods were 17 nM (0.83 ng Cr/ml) for Cr^VI and 0.17 μM (4.8 ng Si/mL) for SiO₄^4?. Copyright © 2016 John Wiley & Sons, Ltd.     

空间波函数的对称性对氦原子双光子双电离过程中电子关联的影响

通过数值求解含时薛定谔方程，研究了氦原子具有对称空间波函数的1s2s 1S态和具有反对称空间波函数的1s2s 3S态分别作为初态的双光子双电离过程. 结果表明，对于初态为单重态1s2s 1S的双光子双电离过程，两个电离电子的能量分布随激光脉冲持续时间的增加呈现由单峰到双峰的变化，这里的单峰和双峰分别意味着两个电离电子主要携带相等和不等的能量；然而对于初态为三重态1s2s 3S的双光子双电离过程，两个电离电子的能量分布随激光脉冲持续时间的增加总是保持双峰结构. 这些结果表明当原子的初态处于反对称空间波函数时，两电子的空间密度分布具有较少的重叠，从而导致电子在超短激光脉冲中电离时电子关联能无法平均分配.     

241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

Determination of structure parameters in strong-field ionization models of atoms

The Ammosov–Delone–Krainov (ADK) and Perelomov–Popov–Terent’ev (PPT) ionization models were widely used in strong-field physics and attosecond science due to their many attractive advantages such as simpler analytical formula, less computational demands, and satisfied accuracy of ionization rate. Based on the density-functional theory, we systematically determine accurate structure parameters of 25 atoms, 24 positive ions and 13 negative ions and tabulate for future applications. The wave function with correct asymptotic behavior is obtained by solving the time-independent Schrödinger equation with B-spline basis sets and the accurate structure parameters are extracted from this wave function in the asymptotic region. The accuracies of structure parameters are carefully examined by comparing the ionization probabilities (or yields) calculated by PPT and ADK models with those of solving the three-dimensional time-dependent Schrödinger equation and the experimental data.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.