Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([C_n-mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir–Blodgett films. It is inferred from the surface pressure-area isotherms that C₁₆-mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C₄- and C₈-mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C₈- or C₁₆-mim-IL is present in the mixed films.     

LSPR Biosensor Signal Enhancement Using Nanoparticle-Antibody Conjugates

A method to amplify the wavelength shift observed from localized surface plasmon resonance (LSPR) bioassays is developed using gold nanoparticle-labeled antibodies. The technique, which involves detecting surface-bound analytes using gold nanoparticle conjugated antibodies, provides a way to enhance LSPR shifts for more sensitive detection of low-concentration analytes. Using the biotin and antibiotin binding pair as a model, we demonstrate up to a 400% amplification of the shift upon antibody binding to analyte. In addition, the antibody-nanoparticle conjugate improves the observed binding constant by 2 orders of magnitude, and the limit of detection by nearly 3 orders of magnitude. This amplification strategy provides a way to improve the sensitivity of plasmon-based bioassays, paving the way for single molecule-based detection and clinically relevant diagnostics.     

Dendron to Central Core S1–S1 and S2–Sn (n>1) Energy Transfers in Artificial Special Pairs Containing Dendrimers with Limited Numbers of Conformations

Two dendrimers consisting of a cofacial free‐base bisporphyrin held by a biphenylene spacer and functionalized with 4‐benzeneoxomethane (5‐(4‐benzene)tri‐10,15,20‐(4‐n‐octylbenzene)zinc(II)porphyrin) using either five or six of the six available meso‐positions, have been synthesized and characterized as models for the antenna effect in Photosystems I and II. The presence of the short linkers, ‐CH₂O‐, and long C₈H₁₇ soluble side chains substantially reduces the number of conformers (foldamers) compared with classic dendrimers built with longer flexible chains. This simplification assists in their spectroscopic and photophysical analysis, notably with respect to fluorescence resonance energy transfer (FRET). Both steady‐state and time‐resolved spectroscopic measurements indicate that the cofacial free bases and the flanking zinc(II)–porphyrin antennas act as energy acceptor and donor, respectively, following excitation in either the Q or Soret bands of the dendrimers. The rate constants for singlet electronic energy transfer (k_EET) extracted from the S₁ and S₂ fluorescence lifetimes of the donor in the presence and absence of the acceptor are ≤ (0.1–0.3)×10⁹ and ～2×10⁹ s^?1 for S₁→S₁ (range from a bi‐exponential decay model) and about 1.5×10¹² s^?1 for S₂→S_n (n>1). Comparisons of these experimental data with those calculated from Förster theory using orientation factors and donor–acceptor distances extracted from computer modeling suggest that a highly restricted number of the many foldamers facilitate energy transfer. These foldamers have the lowest energy by molecular modeling and consist of one or at most two of the flanking zinc porphyrin antennas folded so they lie near the central artificial special pair core with the remaining antennas located almost parallel to and far from it.     

The one- and multi-sample problem for functional data with application to projective shape analysis

In this paper tests are derived for testing neighborhood hypotheses for the one- and multi-sample problem for functional data. Our methodology is used to generalize testing in projective shape analysis, which has traditionally involving data consisting of finite number of points, to the functional case. The one-sample test is applied to the problem of scene identification, in the context of the projective shape of a planar curve.     

Program derivation with verified transformations — a case study

A program development methodology based on verified program transformations is described and illustrated through derivations of a high level bisimulation algorithm and an improved minimum-state DFA algorithm. Certain doubts that were raised about the correctness of an initial paper-and-pencil derivation of the DFA minimization algorithm were laid to rest by machine-checked formal proofs of the most difficult derivational steps. Although the protracted labor involved in designing and checking these proofs was almost overwhelming, the expense was somewhat offset by a successful reuse of major portions of these proofs. In particular, the DFA minimization algorithm is obtained by specializing and then extending the last step in the derivation of the high level bisimulation algorithm. Our experience suggests that a major focus of future research should be aimed towards improving the technology of machine checkable proofs — their construction, presentation, and reuse. This paper demonstrates the importance of such a technology to the verification of programs and program transformations. We believe that the utility of transformational systems to program development will ultimately rest on a practical program correctness technology. © 1996 John Wiley & Sons, Inc.     

Why Aren't There Any Trioxygenyl or Ozonium Salts? Or,Why Does Our Reaction of O3 and PtF6 Give O2PtF6?

The reaction of ozone and gaseous platinum hexafluoride led to O₂PtF₆(s) and not the desired O₃PtF₆(s). Suggestions as to why the synthesis of O₃PtF₆(s) failed are made in terms of the known chemistry of the gaseous O ₃ ⁺ cation with O ₊ ⁵ proposed as an intermediate.     

On the sensitivity of the LU factorization

This paper gives sensitivity analyses by two approaches forL andU in the factorizationA=LU for general perturbations inA which are sufficiently small in norm. By the matrix-vector equation approach, we derive the condition numbers for theL andU factors. By the matrix equation approach we derive corresponding condition estimates. We show how partial pivoting and complete pivoting affect the sensitivity of the LU factorization. The material presented here is a part of the first author's PhD thesis under the supervision of the second author. This research was supported by NSERC of Canada Grant OGP0009236.     

DEMONSTRATION THAT PHOSPHORESCENT 6-BROMO-2-NAPHTHYL SULFATE CAN BE USED TO PROBE HEME ACCESSIBILITY IN HEME PROTEINS

The phosphorescence properties of 6-bromo-2-naphthyl sulfate (BNS) in aqueous solution were studied. The phosphorescence lifetime is several hundred microseconds and is self-quenched. Although a fluorescent photoproduct is formed from BNS, it does not interfere with the decay properties of triplet-state BNS and its utility as a probe of the accessibility of the heme group in heme proteins. Quenching of BNS phosphorescence does not occur for the non-heme protein lysozyme and apomyoglobin but occurs by a dynamic mechanism with a quenching constant of 1-2 x 10(9) M-1 s-1 for cytochrome c and myoglobin and with a quenching constant of 6.2 x 10(9) M-1 s-1 for protoporphyrin IX. The phosphorescence of an inclusion complex of 1-bromonaphthalene and beta-cyclodextrin is not quenched by heme-containing proteins. The temperature and viscosity dependencies of the rate with which BNS phosphorescence is quenched by microperoxidase-11 are consistent with unit quenching efficiency. These results indicate that quenching of BNS phosphorescence occurs only upon contact with the quencher, and the quenching constant can be used to assess the degree of accessibility of the heme group.