Morphology-dependent photoluminescence property of red-emitting LnOCl:Eu (Ln=La and Gd)

Three different synthetic methods, the liquid phase process in HCl solution, the solvothermal reaction, and the surfactant-assisted solvothermal reaction, were explored to selectively control the particle shape and to enhance the luminescence intensity of the PbFCl-type red-emitting oxychloride phosphors LnOCl:Eu (Ln=La and Gd). The solvothermal pressure facilitated the low-temperature crystallization of the rod-shape particles for both Ln=La and Gd. It is noted that LaOCl:Eu nanorods show highly porous particle surface and quite low photoemission intensity. In contrast, the solvothermal synthesis could highly enhance the red-emission of GdOCl:Eu with no porous surface so as to be comparable to that of commercial Y₂O₃:Eu phosphor. An addition of surfactant material during solvothermal reaction yielded a rhomboidal-shape phosphor particles with no porous surface for both Ln=La and Gd. Interestingly, the elimination of surface porosity by using a surfactant significantly increased the emission intensity of LaOCl:Eu. It is proposed that the application of solvothermal technique for the synthesis of the PbFCl-type oxychloride phosphors is very effective to selectively control the particle shape and consequently to enhance the photoemission intensity if we use an appropriate surfactant material.     

Solvothermal Synthesis, Crystal Structure and Electrochemical Property of Complex [Co(p-MBA)2(2,2''-bipy)(H2O)]·(H2O)

One novel complex [Co(p-MBA)2(2,2'-bipy)(H2O)]·(H2O) has been synthesized by the reaction of p-methylbenzoic acid with 2,2'-bipyridine in the solvent mixture of water and methanol. It crystallizes in triclinic, space group P-1 with a=0.70479(14), b=1.1211(2), c=1.6718(3) nm, α=103.806(3), β=90.795(3), γ=104.207(3)°, V=1.2399(4) nm3, Mr=512.41, Dc=1.373 g/cm3, Z=2, F(000)=532, μ=0.733 mm-1, R=0.0432 and wR=0.0957. The crystal structural analysis shows that the cobalt atom is coordinated with three oxygen atoms from two p-methylbenzoic acids and one water molecule and two nitrogen atoms from one 2,2'-bipyridine,forming a distorted square-pyramidal coordination geometry. The cyclic voltammetry behavior of the complex is also reported.     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.     

Solvothermal synthesis of new metal organic framework structures in the zinc-terephthalic acid-dimethyl formamide system

Two new metal organic framework (MOF) structures have been obtained from the Zn-terephthalic acid (H₂BDC)-dimethyl formamide (DMF) system and examined by single-crystal X-ray diffraction: Zn(C₈H₄O₄)(C₃H₇NO), 1, monoclinic C2/m, a=11.1369(5), b=14.0217(7), , β=106.316(1)°, , , Z=4, R₁=0.060, wR₂=0.169, S=1.27; Zn(HCO₂)₃(C₂H₈N), 2, trigonal , a=8.1818(1), , , , Z=6, R₁=0.014, wR₂=0.039, S=1.11. Contrary to previously published structures in the same system, the crystals were obtained by solvothermal synthesis at 381 K. Structure 1 consists of 2-D layers stacked in an offset manner to accommodate DMF moieties coordinated to Zn²⁺ within voids in adjacent layers. Structure 2 consists of a 3-D network constructed from Zn²⁺ ions bridged by deprotonated formic acid moieties. Over time, the structure of 1 rearranges to Zn(C₈H₄O₄)(C₃H₇NO)(H₂O) [monoclinic P2₁/n, a=6.6456(2), b=15.2232(5), , β=104.110(2)°, , , Z=4, R₁=0.048, wR₂=0.100, S=1.07], which is identical to the known MOF-2 structure, obtained by crystallization at ambient conditions. The three structures were determined from crystals with similar crystal habits picked from a single solvothermal synthesis batch. The study demonstrates that MOF syntheses can give not only multiple crystal structures under different conditions, but also that numerous different structures, including some that are metastable, can be formed under identical conditions.     

Solvothermale Synthese und Bestimmung der Kristallstrukturen von AgBiI4 und Ag3BiI6

Solvothermal Synthesis and Crystal Structure Determination of AgBiI₄ and Ag₃BiI₆ AgBiI₄ and Ag₃BiI₆ were synthesized by solvothermal reaction from AgI and BiI₃ in diluted HI‐solution (20 %) at a temperature of 160 °C. The greyish‐black crystals grow as octahedra (AgBiI₄) or hexagonal/trigonal platelets (Ag₃BiI₆). AgBiI₄ crystallizes in space group Fd3¯m with a = 1222.3(1) pm (300 K) and Z = 8 whereas Ag₃BiI₆ shows the space group R3¯m with a = 435.37(6) pm, c = 2081.0(4) pm (300 K) and Z = 1. Both crystal structures show stacking sequence abcabc… of hexagonal layers containing Iodine. Bismuth and silver are sharing octahedral sites with different mass ratio in both structures. The part of silver which could be localized varies with temperature. This behaviour indicates mobility of silver within the crystal structure. The ionic conductivity of AgBiI₄ is explored. AgBiI₄ and Ag₃BiI₆ show close structural relationship, with AgBiI₄ as a variant with a higher degree of order.     

Solvothermal synthesis of an open-framework zinc chlorophosphate, [C8N4H26][Zn3Cl(HPO4)3(PO4)], with a layer structure

A solvothermal reaction of ZnO, HCl, H₃PO₄, and N,N′(3-bisaminopropyl)-1,2-ethylenediamine (BAPEN) in diethyleneglycol at 160°C yields a new zinc chlorophosphate, [C₈N₄H₂₆][Zn₃Cl(HPO₄)₃(PO₄)], I. The structure comprises ZnO₄, ZnO₃Cl, HPO₄ and PO₄ tetrahedral units connected through their vertices giving rise to a layered structure with 10-membered apertures. The position of the Zn and P atoms gives rise to double-four ring like building unit with one Zn missing. The fully protonated amine molecules occupy the inter-lamellar region and interacts with the framework through N-H?O hydrogen bonds. Crystal data: M=792.85, orthorhombic, space group=Pca2₁ (no. 29), a=9.8410(2), b=15.0912(2), c=16.1220(4) Å, V=2394.32(8) Å³, Z=4, ρ_calc=2.199 g cm⁻³, μ(MoKα)=3.443 mm⁻¹, R₁=0.0520, wR₂=0.1256 and S=1.054.     

Morphology-controlled nonaqueous synthesis of anisotropic lanthanum hydroxide nanoparticles

The preparation of lanthanum hydroxide and manganese oxide nanoparticles is presented, based on a nonaqueous sol-gel process involving the reaction of La(OiPr)₃ and KMnO₄ with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. The lanthanum manganese oxide system is highly complex and surprising results with respect to product composition and morphology were obtained. In dependence of the reaction parameters, the La(OH)₃ nanoparticles undergo a shape transformation from short nanorods with an average aspect ratio of 2.1 to micron-sized nanofibers (average aspect ratio is more than 59.5). Although not directly involved, KMnO₄ plays a crucial role in determining the particle morphology of La(OH)₃. The reason lies in the fact that KMnO₄ is able to oxidize the benzyl alcohol to benzoic acid, which presumably induces the anisotropic particle growth in [0 0 1] direction upon preferential coordination to the ±(1 0 0), ±(0 1 0) and ±(−110) crystal facets. By adjusting the molar La(OiPr)₃-to-KMnO₄ ratio as well as by using the appropriate solvent mixture it is possible to tailor the morphology, phase purity and microstructure of the La(OH)₃ nanoparticles. Postsynthetic thermal treatment of the sample containing La(OH)₃ nanofibers and β-MnOOH nanoparticles at the temperature of 800 °C for 8 h yielded polyhedral LaMnO₃ and worm-like La₂O₃ nanoparticles as final products.     

链状[NH3CH2CH2NH3]AgAsS4的溶剂热合成及表征

利用溶剂热方法合成了链状[NH3CH2CH2NH3]AgAsS4,通过单晶X射线衍射技术对其进行了晶体结构分析,该化合物晶体属单斜晶系,空间群C2/c,晶胞参数a=1.35805(8)nm,b=0.65331(3)nm,c=2.27711(9)nm,β=106.42(3)°,Z=8.化合物具有有趣的梯子状双链结构,该阴离子链由AsS4与AgS3共用顶点交替连接而成,有机阳离子在阴离子链之间存在较强的N—H…S氢键.DSC和Tg分析结果表明化合物在200℃以下是稳定的.     

(EnH2)2Ge2S6的合成与结构表征

用溶剂热方法制备了(EnH2)2Ge2S6单晶.单晶X射线衍射分析结果表明,(EnH2)2Ge2S6属单斜晶系,P2(1)/n空间群,晶胞参数a=0.67125(5)nm,b=1.12290(4)nm,c=1.07518(4)nm,β=92.288(2)°,Z=2.利用DSC及TG分析研究了其热稳定性,结果表明,该化合物在200℃以下能够稳定存在.     

Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.