电感耦合等离子发射光谱法测定铁基粉末冶金中的钙元素

利用电感耦合等离子发射光谱法（ICP-OES）测定铁基粉末冶金中的钙元素.通过调整酸度配比和消除干扰因素，采用外标法定量消除基体效应的影响，同时共存元素的干扰校正试验表明，样品中共存元素对待测元素无干扰影响.通过对样品消解进行前处理优化，结果表明:在样品中加入王水后在电热板上加热，消解后滴加双氧水，使用ICP-OES测定，能获得良好的定量结果.在0.5~10 mg/L范围内具有较好的线性关系，其线性相关系数为0.999 9，方法精密度的RSD为0.14%（n=10），加标回收率为98%~105%.方法具有经济、快速、简单且重现性好等特点，可以满足日常分析检测要求.     

高盐样品中锂的电感耦合等离子体发射光谱法(ICP-OES)测定研究

锂是重要的战略金属和新能源材料,其开发利用受到全球的高度关注。在高盐卤水特别是盐湖卤水和地下卤水中富含巨量的锂资源,在对这些资源进行锂的开发利用过程中,需对锂的含量进行准确测定,然而卤水中共存的高浓度Na+, K+, Ca2+和Mg2+会对微量锂的准确测定产生严重的干扰。电感耦合等离子体发射光谱法(ICP-OES)具有线性范围宽和多元素同步分析能力,针对卤水中锂的快速准确测定,详细开展了高盐样品中锂的ICP-OES分析方法研究。结果表明,锂在610.364 nm处具有较高的信噪比,且Na+, K+, Ca2+, Mg2+和Ar不会对锂的测定产生显著的谱线干扰。然而,样品中大量共存的Na+, K+和Mg2+会对锂的测定产生严重的基体正干扰,而Ca2+产生负干扰。尽管内标法在消除基体干扰方面具有广泛的应用,但传统的以钇和钪为内标元素的内标法不能有效解决该问题。此外,针对标准加入法操作繁琐、不适合批量样品分析问题,以及基体匹配法需多离子匹配,且不适合样品基体组成变化的批量样品分析等问题,考察了采用单一组分进行复杂基体匹配的可行性。由于NaCl广泛存在于卤水中,且对锂的测定具有显著的增敏效应,通过系列研究发现,通过同时向样品和标准溶液中加入10 g·L-1的NaCl,成功解决了总量不超过40 g·L-1的NaCl, KCl和MgCl2所产生的干扰。尽管采用该法或沉淀预分离方式均不能消除Ca2+产生的负干扰,但当样品中Ca2+含量不高于1.8 g·L-1时,对测定不产生显著的影响。通过采用该方法对三种不同基体组成的卤水样品进行加标回收测定,其回收率在96.60%~104.20%范围内。此外,通过与电感耦合等离子体质谱法(ICP-MS)测定结果进行对比,充分论证了该法的准确性和可靠性(相对误差±3.66%)。该法仅以单一的NaCl进行复杂基体匹配,不仅简化了操作,还实现了基体组成变化的批量样品分析,因而在卤水中锂的快速准确测定及锂资源开发利用方面具有重要意义。     

Determination of acid volatile sulphur in river sediments by ICP-OES coupled with purge and trap method

The developed and tested method is based on the acid volatile sulphur (AVS) releasing from a sample of sediment by acidification with hydrochloric acid and sequential absorption of released hydrogen sulphide into the absorption solution of sodium hydroxide. Total sulphur absorbed in the absorption solution is subsequently determined by inductively coupled plasma optical emission spectrometry (ICP-OES) technique. The method was tested using both model and real samples of the river sediment. Obtained results were compared with the results of iodometric determination as the method routinely used for the AVS determination. In case of using ICP-OES with purge and trap, there is no spectral interference of calcium; therefore for the determination of sulphur, it is possible to use atomic emission line of sulphur S I 180.7 nm. The tested method provides the results comparable with the iodometric method within the range of tested concentrations. The detection limit (LOD) of this method is 0.09 mg· S^2? ? L^?1 in the absorption solution which corresponds to 0.23 mg S^2?·kg^?1 in a sediment. Value of LOD is comparable with the iodometric determination.     

电感耦合等离子体原子发射光谱法(ICP-OES)测定铍铀伴生矿石中的铍

建立了电感耦合等离子体原子发射光谱法(ICP-OES)测定铍铀伴生矿石中的铍的方法,研究了酸溶-碱熔融法溶样过程中加入的焦硫酸钾,对ICP-OES法测定铍铀伴生矿石中的铍含量产生的基体干扰问题。主要阐述消除基体干扰的一些措施。从实验数据可知,控制称样量、焦硫酸钾加入量、定容体积和加标稀释倍数,能够有效消除焦硫酸钾对ICP-OES法测定结果的基体干扰,6次平行测定结果的相对标准偏差为3.4%,加标回收率为98.7%~104.4%,实验表明,方法准确、可靠。     

微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

微波消解-ICP-OES法测定哈氏C-276合金中Cr、Fe、Mo、W元素

建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.     

新乐工业新区土壤中多种元素的测定

采用湿法消解对不同厂区的土壤进行前处理,应用电感耦合等离子体原子发射光谱法(ICP-OES)测定土壤中的金属元素含量,使用原子荧光光谱法AFS测定砷的含量,测定的相对标准偏差为0.8%～3.0%,回收率为89.0%～105.5%。实验表明,方法简单快速、准确,较高的灵敏度和较低的检出限,均能满足土壤中多元素分析的要求。     

Development and Optimization of Pre-Concentration Procedure of Rare-Earth Elements (REEs) in Their Minerals,Using Microwave - Assisted Sample Dissolution for ICP-Atomic Emission Spectrometric Detection

The aim of this research was to develop and optimize a procedure for determination of REEs in xenotime and monazite samples collected from Bangka Island, which were compared to Standard Monazite (71 AG) of Bureau of Analyzed Samples, London. ICP-OES method was used for the determination. The samples were dried and sterilized by heating for a week at 110 °C, before digesting with nitric acid and hydrofluoric acid, using a microwave-assisted digestion system. After a careful line selection, at the detection limits for all REEs in the ng/mL the REEs were reliably obtained at the 0.09 – 38% level.     

Synthesis and structural characterization of new bioactive ligands and their Bi(III) derivatives

Five new carboxylic acid precursors bearing thiourea group and their corresponding bismuth(III) complexes were synthesized and characterized using CHNS and inductively coupled plasma analyses and infrared and NMR (¹H, ¹³C) spectroscopies. Single‐crystal X‐ray diffraction analysis was also carried out for one of the precursors. The behaviour of the compounds was bioassayed for antibacterial, antifungal, antioxidant and enzyme (lipoxygenase, α‐glycosidase and anti‐urease) inhibition activities. It is concluded that the interaction of the compounds with bismuth enhances both the antimicrobial and enzyme inhibition activities. The synthesized compounds may prove to be good therapeutic agents.     

Simultaneous Determination of Sn and S in Methyltin Mercaptide by Microwave-Assisted Acid Digestion and ICP-OESSCIEI北大核心CSCD

Methyltin mercaptide is widely used as one of the best heat stabilizer in the polyvinylchloride (PVC) thermal processing due to its excellent stability, good transparency, high compatibility and weather resistance. The content of sulfur and tin significantly affects its quality and performance, so it is of great significance to develop an analytical method for the simultaneous determination of sulfur and tin. Inductively coupled plasma atomic emission spectrometry (ICP-OES) has been a powerful analytical tool for a myriad of complex samples owing to its advantages of the low detection limits, rapid and precise determinations over wide dynamic ranges, freedom from chemical inter-element interferences, the high sample throughput and above all, simultaneous multi-elements analysis. Microwave technique as a well-developed method for sample preparation can dramatically reduce the digestion time and the loss of volatile elements compared with the traditional open digestion. Hereby, a microwave-assisted acid digestion (MW-AAD) procedure followed by inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis was developed for the simultaneous determination of Sn and S in methyltin mercaptide. This method has the advantages of simplicity, rapidness, good accuracy, green and less use of samples. Parameters affecting the MW-AAD such as the digestion solution and digestion time were optimized by using a chemical analyzed reference sample (DX-181) to attain tin and sulfur quantitative recoveries. HNO3-HCl-HClO4(v/v/v=9 : 3 : 1) and 10 min were the optimum digestion solution and digestion time, respectively. Under optimum conditions, the standard addition method and the standard calibration curve method were both been used to detect Sn and S in DX-181. There was no significant difference between two methods and the relative deviations to the chemical analysis values were both less than 2%. Additionally, the accuracy of the MW-AAD method was examined by analyzing three methyltin mercaptide samples (DX-181, DX-990, DX-960). The results were satisfactory with the relative deviations (<3%) and the recoveries of standard addition (99%-102%).