核物质热力学性质的同位旋和动量相关性

利用3个具有不同的同位旋和动量相关性的热力学模型研究了非对称核物质的热力学性质, 它们是重离子碰撞中同位旋弥散数据约束下的、 同位旋和动量相关的MDI模型, 完全动量无关的MID模型, 以及同位旋标量动量相关的extended MDYI(eMDYI)模型。 主要研究了同位旋非对称热核物质的对称能和系统力、 化学不稳定性以及液气相变的温度效应。 MDI模型对称能的温度效应来源于动能和势能两部分贡献, 而MID和eMDYI模型只有势能部分对对称能的温度效应有贡献。 研究结果还表明, 力学不稳定性区域、 化学不稳定性区域和液气共存区都依赖于模型的同位旋和动量相关性, 以及对称能的密度依赖关系。In this article, three models with different isospin and momentum dependence are used to study the thermodynamical properties of asymmetric nuclear matter. They are isospin and momentum dependent MDI interaction constrained by the isospin diffusion data of heavy ion collision, the momentum independent MID interaction and the isoscalar momentum dependent eMDYI interaction. Temperature effects of symmetry energy, mechanical and chemical instability and liquid gas phase transition are analyzed. It is found that for MDI model the temperature effects of the symmetry energy attribute from both the kinetic and potential energy, while only potential part contributes to the decreasing of the symmetry energy for MID and eMDYI models. We also find that the mechanical instability, chemical instability and liquid gas phase transition are all sensitive to the isospin and momentum dependence and the density dependence of the symmetry energy.     

双用户2.5 Gb/s 100 km光码分多址传输实验

稳定性高、低成本的窄脉冲光源、高性能编解码器和具有旁瓣/噪声抑制功能的接收机是光码分多址系统实用化的3个关键模块.实验中利用增益开关脉冲光源和63 chip等效相移超结构布拉格光纤光栅相位编解码器的半边带应用,判决门限调整与宽带判决相结合的接收机实现了双用户、2.5 Gb/s 100 km传输.实验中测量了误码率与判决时刻和判决门限的关系曲线,系统在10 ps的判决时刻容限内和17%的幅度判决容限内实现了无误码传输.     

Structural and Thermodynamic Properties of M3W3N （M=Fe,Co, Ni）

Ternary transition metal nitrides, Fe3 W3N, Coa W3N, and Nia WaN~ are studied by the use of interatomic potentials acquired from lattice inversion. The study indicates that Fe3 WaN would be more stable than the other compounds in the family of intermetallic tungsten nitrides. The investigation of phonon density of states indi- cates that the lower frequency modes are mostly excited by the metal atoms, and the higher frequency modes are mostly excited by the nitrogen atoms. A qualitative analysis is carried out with the relevant potentials for the phase stability and vibrational modes.     

Friction Properties of Bio-mimetic Nano-fibrillar Arrays

Nano-fibrillar arrays are fabricated using polystyrene materials. The average diameter of each fiber is about 300 nm. Experiments show that such a fibrillar surface possesses a relatively hydrophobie feature with a water contact angle of 142°. Nanoscale friction properties are mainly focused on. It is found that the friction force of polystyrene nano-fibrillar surfaces is obviously enhanced in contrast to polystyrene smooth surfaces. The apparent coefficient of friction increases with the applied load, but is independent of the scanning speed. An interesting observation is that the friction force increases almost linearly with the real contact area, which abides by the fundamental Bowden-Tabor law of nano-seale friction.     

An Extension of the Two-Dimensional JKR Theory to the Case with a Large Contact Width

In the Hertz and JKR theories, parabolic assumptions for the rounded profiles of the sphere or cylinder are adopted under the condition that the contact radius （width） should be very small compared to the radius of the sphere or
cylinder. However, a large contact radius （width） is often found in experiments even under a zero external loading. We aim at extending the plane strain JKR theory to the case with a large contact width. The relation between the external loading and the contact width is given. Solutions for the Hertz, JKR and rounded-profile cases are compared and analyzed. It is found that when the ratio of a/R is approximately larger than about 0.4, the parabolic assumptions in the Hertz and JKR theories are no longer valid and the exact rounded profile function should be used.     

寻找解题的“切入点”

在解难度稍大、综合性稍强的物理综合题时,常听到有些同学抱怨"一头雾水"、"无从下手",甚至在高考大题上一片空白,留下终生遗憾,究其原因,是未找准解题的"切入点",俗话讲"良好的开端,是成功的一半"、"入门即不难",可见解题时选准切人点是解题的基础和关键,切人的策略可有以下几个方面.     

简易精确的圆锥摆实验

人教版《必修2》第五章第7节向心力一节内容中,安排了“用圆锥摆粗略验证向心力的表达式”的实验．这个实验从简易方便的原则出发,用生活中常见的物品来做或用通用器材来做,一方面减少了由于器材不足引起的困难,确保实验的开展,另一方面,拉近了与学生的距离,易使学生对科学产生亲近感．这个实验的优点除了器材易得外,摆球受力的分析方法也是常用的,熟练掌握有利于后面的学习．     

氮掺杂及水分子吸附碳纳米管电子场发射第一性原理研究

对闭口碳纳米管(CNT)顶端分层掺氮及吸附不同数目水分子体系,运用第一性原理研究了有电场存在时的电子场发射性能.结果表明：掺氮并吸附水分子的CNT结构稳定;外电场愈强、水分子数愈多,体系态密度(DOS)向低能端移动幅度愈大且最高分子占据轨道(HOMO)/最低分子空轨道(LUMO)能隙愈小.吸附能,DOS/LDOS,HOMO/LUMO及其能隙分析一致表明,第三层氮掺杂CNT吸附不同数目水分子体系的场发射性能最佳. 关键词： 氮掺杂 水吸附 密度泛函理论 电子场发射     

碳掺杂硼氮纳米管电子场发射的第一性原理研究

对闭口硼氮纳米管（BNNT）顶层掺碳体系,运用第一性原理研究了电子场发射性能.结果表明,掺碳的BNNT体系电子结构变化显著;外电场愈强,体系态密度向低能端移动幅度愈大,且最高占据分子轨道（HOMO）/最低未占据分子轨道（LUMO）能隙愈小.体系态密度和局域态密度,HOMO和LUMO及其能隙分析一致表明,各种碳掺杂体系中C_eqBNNT的场发射性能最佳. 关键词： 硼氮纳米管 碳掺杂 第一性原理     

碳纳米锥电子场发射的第一性原理研究

运用第一性原理研究了不同锥角和结构的碳纳米锥 （CNC） 电子场发射性能.结果表明：随外电场 （E_add） 增强,CNC电子结构变化显著,费米能级 （E_f） 处态密度 （DOS） 明显增大;赝能隙减小;体系电荷移向尖端.DOS,HOMO/LUMO及Mulliken电荷分析表明：CNC的电子场发射性能除依赖于尖端结构外,很大程度上还取决于锥角大小,特别顶层6个原子的CNC₃和CNC₄场发射性能 关键词： 碳纳米锥 电子场发射 第一性原理