Observation of Quantum Beat in Rb by Parametric Four-Wave Mixing

Two coupled paralnetric four-wave-mixing processes in Rb atoms are studied using perturbation theory, which reveals clear evidence of tile appearance of quantum beat at 608cm^-1, corresponding to the energy difference of the 7s - 5d states of Rb atoms, in the parametric four-wave-mixing signals. A pump-probe technique is utilized to observe the quantum beat. Tinle-varying characteristics of the quantum beat are investigated using time-dependellt Fourier transform. The results show that the time-varying characteistics of the quantum beat not oldy offers a sensitive detecting method for observing the decay of atomic wave packets, but also provides a potential tool for monitoriHg the dissociation of molecules.     

Guided Waves in a Multi-Layered Cylindrical Elastic Solid Medium

We investigate the guided waves in a multi-layered cylindrical elastic solid medium. The dispersion function of guided waves is usually complex and the dispersion curves of all modes are not conveniently obtained. Here we present an effective method to obtain the dispersion curves of all modes. First, the dispersion function of the guided waves is transformed into a real function. The dispersion curves are then calculated for all the modes of the guided waves by the bisection method. The modes with the orders n = 0, 1, and 2 are analysed in two- and three-layer media. The existence condition of Stoneley wave is discussed. The modes of the guided waves are also investigated in a two-layer medium, in which the velocity of shear wave in the outer layer is less than that in the inner layer.     

Lattice Boltzmann Simulation for the Optimized Surface Pattern in a Micro-Channel

Based on the Bhatangar-Gross-Krook （BGK） models, numerical simulation using the lattice Boltzmann model is performed to investigate the optimized surface pattern in a micro-channel. In order to simulate the practical situation correctly, a slip/no-slip boundary condition is applied with making several assumptions. To assess the validity and efficiency of the model, one benchmark problem with considering the surface patterns is studied. Numerical results show the value of rms velocity Vrms increases with the increasing ratio β and larger Reynolds number Re, higher fluctuation of the rms oscillating velocity. Furthermore, the results show that a good mixing effect can be obtained when Re is large enough and the ratio β is about 1.618,which is the appropriate choice, i.e. the well known golden section phenomenon.     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

波前编码系统成像特性的空间域分析

波前编码技术在大幅度地增加光学系统景深的同时,可以抑制各种离焦类型的像差。目前波前编码系统的成像特性分析大多是基于空间频率域的分析,在应用稳定相法导出三次型相位板波前编码系统的点扩展函数近似解析式的基础之上,描述了点扩展函数的边界、带宽与振荡等特性,分析了波前编码系统对离焦、像散、彗差等常见像差的敏感性,从空间域进一步分析了波前编码系统的成像特性。     

基于表面等等离波子的新型Y分支波导

新型高效的纳米光波导器件的研制纳米集成光学的核心技术之一。Y分支波导作为最基本的分光和光路连接元件是纳米光学器件设计与制备的基础。运用时域有限差分(FDTD)法,模拟计算了基于表面等等离波子(SPP)的纳米Y分支波导的传输特性。结果表明,该新型Y分支波导在光通信波段可以实现大角度的分光功能,且在180°分支情况下,传输效率仍高达92.8%以上。另外,该波导还具有导波性能良好、对分叉处间隙缺陷大小不敏感及制作容差较大和器件尺寸在纳米量级等特点。对该新型光波导器件的研究为未来纳米集成光学器件的研制和应用有一定的指导意义。     

太赫兹波光子晶体光纤传输特性分析

利用矢量有限元法分析了太赫兹波光子晶体光纤单模截止频率和波导色散随光纤结构的变化特性．结果表明，太赫兹波光子晶体光纤的单模截止频率随着光纤空气孔占空比的变大而降低，零波导色散点频率随着空气孔占空比变大而增加，约束损耗随着空气孔的圈数增加而降低．     

新型原子力显微镜

日本、西班牙和捷克的物理学家开发了一种新型原子力显微镜，这种显微镜可以探测材料表面单个原子的化学属性，而现在的原子力显微镜仅可以探测原子的位置．新型原子力显微镜可以精确地确定材料表面的组成和结构，这种特性甚至允许人们去操纵特定的某一类原子，换句话讲就是可以一个原子一个原子地来搭建纳米结构．     

表面注入P-top区double RESURF功率器件表面电场模型

提出表面注入P-top区double RESURF功率器件表面电场和击穿电压解析模型. 基于分区求解二维Poisson方程, 获得double RESURF表面电场的解析式. 借助此模型, 研究了器件结构参数对表面电场和电势的影响; 计算了漂移区长度和厚度与击穿电压的关系, 给出了获得最大击穿电压和最小导通电阻的途径. 数值结果, 解析结果和试验结果符合较好.     

长岗半太郎（Nagaoka，Hantaro，1865-1950）日本物理学家（Physicist，Japan）

长岗半太郎1887年毕业于东京大学，在获得博士学位后又去德国和奥匈帝国进一步深造。他对原子结构很有兴趣。当时，人们已知道原子中含有带负电的电子。汤姆孙设想原子是带正电的球体，电子散布在球体表面和内部。长岗半太郎不同意这一看法。他认为，在原子的中心有一个正电体，电子则像行星环绕太阳，或像土星的光环那样环绕行星运行。