Radially polarized and passively Q-switched Nd:YAG laser with composite structure of gain medium

We report on a radially polarized and passively Q-switched Nd:YAG/Cr4+:YAG laser.The bulk Nd:YAG crystal is bonded with two undoped YAG crystal end caps to weaken the thermal lens e?ect and thus,enhance the extraction of stored energy in the bulk gain material.In the absence of active water cooling,the average laser power reaches 383 mW with 33% slope efficiency,and the laser pulse achieves 1.457-W peak power,18.9-ns duration,and 13.9-kHz repetition rate with 97.6% polarization purity.     

Mo/Si aperiodic multilayer broadband reflective mirror for 12.5-28.5-nm wavelength range

Aperiodic molybdenum/silicon (Mo/Si) multilayer designed as a broadband reflective mirror with mean reflectivity of 10% over a wide wavelength range of 12.5-28.5 nm at incidence angle of 5° is developed using a numerical optimized method. The multilayer is prepared using direct current magnetron sputtering technology. The reflectivity is measured using synchrotron radiation. The measured mean reflectivity is 7.0% in the design wavelength range of 12.5-28.5 nm. This multilayer broadband reflective mirror can be used in extreme ultraviolet measurements and will greatly simplify the experimental arrangements.     

Study of diode-pumped Yb:YAG disk lasers at low temperature

A Yb:YAG disk laser with V-shaped stable resonator and active-mirror configuration,end-pumped by a 940-nm InGaAs laser diode array,is demonstrated.Performances and optimization of the disk laser at low temperature over a range of 130-200 K are investigated theoretically and experimentally.Laser output energy of 1.46 J/pulse operating at 10-Hz repetition rate is obtained with the optimum output coupler transmission of 30%,and the corresponding optical-to-optical efficiency is 48.7%.     

Microstructure evolution of laser solid forming of Ti-Al-V ternary system alloys from blended elemental powders

Morphology evolution of prior β grains of laser solid forming (LSF) Ti-xAl-yV (x 11,y 20) alloys from blended elemental powders is investigated. The formation mechanism of grain morphology is revealed by incorporating columnar to equiaxed transition (CET) mechanism during solidification. The morphology of prior β grains of LSF Ti-6Al-yV changes from columnar to equiaxed grains with increasing element V content from 4 to 20 wt.-%. This agrees well with CET theoretical prediction. Likewise, the grain morphology of LSF Ti-xAl-2V from blended elemental powders changes from large columnar to small equiaxed with increasing Al content from 2 to 11 wt.-%. The macro-morphologies of LSF Ti-8Al-2V and Ti-11Al-2V from blended elemental powders do not agree with CET predictions. This is caused by the increased disturbance effects of mixing enthalpy with increasing Al content, generated in the alloying process of Ti, Al, and V in the molten pool.     

Modified adaptive algebraic tomographic reconstruction of gas distribution from incomplete projection by a two-wavelength absorption scheme

A modified adaptive algebraic reconstruction technique (MAART) with an auto-adjustment relaxation parameter and smoothness regularization is developed to reveal the tomographic reconstruction of H 2 O distribution in combustion from incomplete projections. Determinations of relaxation parameter and regularization factor are discussed with regard to the consideration of improvement in reconstruction and reduction of computational burden. A two-wavelength scheme from tunable diode laser absorption measurement, 7444.36 and 7185.59 cm 1 , is used to simplify the nonlinear solution problem for obtaining the tomographic distributions of concentration and temperature simultaneously. Results of calculations demonstrate that MAART can perform the reconstruction results more efficiently with little complex modification and much lower iterations as compared with the traditional algebraic reconstruction technique (ART) or simultaneous iterative reconstruction technique (SIRT) methods. The stability of the algorithm is studied by reconstruction from projections with random noise at different levels to demonstrate the dependence of reconstruction results on precise line-of-sight measurements.     

多光束激光远场干涉实验研究

设计了多组多孔径光阑,将激光扩束后通过自制的多孔径光阑,获得多光束相干激光光源.基于多光束干涉理论,通过改变不同的光阑,得到多组点状阵列分布的远场干涉图样,结果表明远场中心主瓣具有随着占空比减小能量降低、旁瓣增多的分布规律.实验结果表明,相干源呈正三角形分布时能量集中度较好.对高功率激光相干合成具有一定的参考意义.     

舰船光电对抗中烟幕遮蔽与激光引偏的配合作战研究

通过分析舰船光电对抗作战中烟幕干扰和激光引偏干扰的特点,提出了烟幕遮蔽和激光引偏在对抗半自主激光制导武器时配合使用的作战样式,分析了各种作战样式的使用条件、工作流程和配合要素,以及作战样式的优势与不足,指出了多种干扰手段配合作战是发挥光电对抗系统综合对抗效能的关键.     

激光制备类金刚石膜技术研究

现有技术制备的类金刚石(DLC)膜由于含氢、硬度低、内应力大、附着力差等特点,严重限制了其光学工程应用.激光法是近年发展的一种制备DLC膜的新方法,相比其他制备方法具有诸多优点.综合分析了激光制备DLC膜过程中,激光波长、脉宽、功率密度、衬底温度和偏压等因素对薄膜质量的影响规律.采用氧气氛辅助沉积、元素掺杂和双波长激光...     

Efficient two-photon sensitized luminescence of europium （Ⅲ） complex based on hypersensitive transitions

Red frequency-upconversion fluorescence emission is observed in europium(Ⅲ) complex with encapsulating polybenzimidazole tripodal ligands, pumped with 930- and 1070-nm picosecond laser pulses. The lumines- cence of transition 5D0 →7F2 (612 nm) is induced by two-photon absorption of hypersensitive transitions 7F0 →5D2 (465 nm) and 7F1 →5D1 (535 nm). Analysis results suggest that the two-photon excitation strength of these hypersensitive transitions is increased dramatically owing to the C3 symmetry of the coordination field.     

Terahertz-wave generation by surface-emitted four-wave mixing in optical fiber

We propose a novel terahertz-wave source through the four-wave mixing effect in a conventional single-mode optical fiber pumped by a dual-wavelength laser whose difference frequency lies in the terahertz range. Surface-emitted geometry is employed to decrease absorption loss. A detailed derivation of the terahertz-wave power expression is presented using the coupled-wave theory. This is a promising way for realizing a reasonable narrow-band terahertz-wave source.