Tunable terahertz-wave generation from DAST crystal by dual signal-wave parametric oscillation of periodically poled lithium niobate

The first known demonstration of tunable terahertz-wave generation by difference-frequency generation of dual signal-wave quasi-phase-matched optical parametric oscillation was performed with periodically poled LiNbO(3) (PPLN) with a series of gratings. An organic ionic salt, 4-dimethylamino-N-methyl-4-stilbazolium-tosylate (DAST), was used as a nonlinear crystal. A compact terahertz-wave source resulted, and changing the temperature of the PPLN permitted the wavelength to be varied from 120 to 160 mum. The wavelength could be tuned from 100 to 700 mum by proper selection of combinations of periodically poled gratings.     

Generation of continuously tunable terahertz-wave radiation exploited by stimulated polariton scattering

The characteristics of a coherent tunable terahertz-wave source have been experimentally investigated in detail. By using a difference frequency generation as a result of stimulated Raman scattering by polaritons in MgO:LiNbO₃ crystals, the signal wave was continuously tuned in the range of 1.069–1.075 μm, which corresponded to a terahertz-wave in the wide range from 227 to 104 μm (1.3 to 2.9 THz). The highest output signal pulse energy at the pumping level of 44 mJ/pulse was 1.8 mJ/pulse with 20 mW seeder injection, and the terahertz peak power was 139 mW at the wavelength of 143 μm. This source has the advantages of simple alignment, simplicity of tuning, and compactness that makes the device more attractive.     

Josephson-vortex-flow terahertz emission in layered high-Tc superconducting single crystals

We report on the successful terahertz emission (0.6-1 THz) that is continuous and tunable in its frequency and power, by driving Josephson vortices in resonance with the collective standing Josephson plasma modes excited in stacked Bi2Sr2CaCu2O8+x intrinsic Josephson junctions. Shapiro-step detection was employed to confirm the terahertz-wave emission. Our results provide a strong feasibility of developing long-sought solid-state terahertz-wave emission devices.     

太赫兹波光谱特性分析

目前太赫兹技术的研究主要集中在它的产生、探测机理研究上。由于太赫兹波处于微波和可见光之间的频率范围,已有的微波和光波理论是否能适用于太赫兹波或者具有某些共同的特性仍需实验验证。通过实验分析验证了太赫兹波在空气介质中在垂直于传播方向的平面内场振幅是服从高斯函数分布的,测量给出了太赫兹波的能量分布图。根据测试数据推导出太赫兹波在空气介质中能量衰减公式,利用法布里-珀罗(F-P)干涉仪原理设计出太赫兹波长仪,对美国Corehent公司SIFIR-50THz太赫兹激光器发射的1～3THz波长进行了测量。讨论分析了远场发射角、光束入射角度、机械振动、温度波动和折射率n波动等相关因素对测量精度的影响。     

Achromatically injection-seeded terahertz-wave parametric generator

An achromatically injection-seeded terahertz-wave parametric generator was constructed with MgO:LiNbO (3) crystals and a tunable seeder in a stationary dispersion-compensated optical arrangement. Without readjusting the mirrors, we obtained smooth tuning of the terahertz wave over the 0.6-2.6 THz range by adjusting the seeder wavelength alone. We have successfully demonstrated the feasibility of this system for terahertz-wave absorption measurements over a wide frequency range by using low-pressure water vapor.     

Verification of terahertz-wave spectrophotometry by Compton backscattering of coherent synchrotron radiation

We developed a continuous-spectrum light beam from Compton backscattering by using coherent synchrotron radiation in an L-band linac at the Kyoto University Research Reactor Institute. The ratio of Compton backscattered photons to background photons when coherent synchrotron radiation was used was three times larger than when coherent transition radiation was used. The transmission spectrum of a polystyrene film in the terahertz-wave region was evaluated by measuring the spectrum of the Compton backscattered photons and it roughly agreed with that measured by a Martin–Puplett-type interferometer. The spectrophotometry using Compton backscattering shows promise as a new tool for investigations in terahertz-wave science.     

Research of sine waveguide slow-wave structure for a 220-GHz backward wave oscillator

A watt-class backward wave oscillator is proposed,using the concise sine waveguide slow-wave structure combined with a pencil electron beam to operate at 220 GHz.Firstly,the dispersion curve of the sine waveguide is calculated,then,the oscillation frequency and operating voltage of the device are predicted and the circuit transmission loss is calculated.Finally,the particle-in-cell simulation method is used to forecast its radiation performance.The results show that this novel backward wave oscillator can produce over 1-W continuous wave power output in a frequency range from 210 GHz to 230 GHz.Therefore,it will be considered as a very promising high-power millimeter-wave to terahertz-wave radiation source.     

高超噪比宽带毫米波噪声信号光子学产生研究

受电子器件工作频率及功率的限制,传统电子学方法产生的噪声源的超噪比通常小于20 dB,针对这一问题,本文提出了一种基于非相干光拍频产生高超噪比宽带毫米波噪声技术.首先,用两个光滤波器对宽带放大自发辐射光源进行滤波整形.将获得的两束频率不同的放大自发辐射光耦合进入光电探测器进行拍频,从而产生电噪声信号.理论分析发现,通过...     

相位失配与材料吸收对利用GaSe差频产生太赫兹波功率影响的研究

从理论上分析了相位失配与材料吸收在利用GaSe非线性差频产生太赫兹(THz)波中的影响,计算得到了4种不同情况下的晶体最佳长度值和相应THz最大功率,计算了角度失配对于相位失配的影响,计算结果为非线性光学差频实验提供了重要参考依据和理论设计基础. 关键词： 太赫兹波 GaSe晶体 相位失配 材料吸收     

Terahertz-wave parametric oscillator with a misalignment-resistant tuning cavity

We demonstrate a terahertz-wave parametric oscillator (TPO) with a corner-cube resonator consisting of a corner-cube prism (CCP) and a flat mirror. By using the cavity configuration proposed in this Letter, the generation of tunable monochromatic terahertz (THz) waves can be achieved just by rotating the flat mirror instead of rotating the TPO cavity relative to the pump beam. The THz-wave output intensity and pulse width can be controlled periodically by rotating the CCP around the cavity axis. The TPO stability against cavity misalignment is significantly improved by at least 1 to 2 orders of magnitude compared with the conventional plane-parallel resonator configuration.     

Intracavity second-harmonic and sum-frequency generation with a laser-diode-pumped multitransition-oscillation LiNdP4O12 laser

Efficient simultaneous intracavity second-harmonic and sum-frequency generation that is free from irregular large amplitude fluctuations (the so-called green problem) is achieved with a laser-diode-pumped LiNdP(4) O(12) (LNP) laser with a type II phase-matching KTiOPO(4) crystal. Observed frequency-mixing operations result from the simultaneous single-frequency oscillations on different transitions that arise from the wide fluorescence linewidth in a stoichiometric LNP laser that possesses inherently high Nd concentrations. Sum-frequency generation has been shown to arise from the interaction of oscillating longitudinal modes that belong to different transitions. A promising application to coherent terahertz-wave radiation by use of photomixers is proposed.     

Ray tracing method with Fresnel’s transmission to calculate polarized radiation power distribution focused by a terahertz Silicon lens antenna

We study a method for simulating a power-flow density distribution of terahertz-wave focused by a hemispherical Silicon lens antenna. A regular ray-tracing method is not enough to evaluate a correct radiation power-flow because it does not take into account transmittances dependent on angles of incidence at different positions on the spherical boundary of the Si-lens. In this study, we propose a ray-tracing method including Fresnel’s transmission coefficients on the surface of a Si-lens for incoming polarized rays. The power-flow-density distribution calculated by the proposed method has a good agreement except for interference and diffraction with the result obtained by an electromagnetic wave simulator. Our method is so simple and reliable that it is useful for designing and evaluating THz optical systems using dielectric lens antennas.     

周期结构GaAs晶体ps脉冲差频产生窄带THz辐射的研究

计算模拟了在ps脉冲抽运周期结构GaAs晶体差频产生窄带THz波过程中,对于不同波长、不同脉宽的抽运光,周期结构GaAs晶体的走离长度和最佳周期长度的变化,并对计算结果进行了理论分析.研究了周期结构GaAs晶体的畴数对THz波光谱的影响.根据GaAs晶体温度色散公式,计算并分析了晶体最佳周期长度的温度调谐特性,研究了温度变化对THz波光谱的影响,提出了通过温度调谐实现在周期结构GaAs晶体中产生宽调谐、窄带宽THz波的新方法,该计算结果为下一步的实验研究提供了理论基础. 关键词： ps脉冲 差频产生窄带THz波 周期结构GaAs晶体 温度调谐     

Investigation of pump-wavelength dependence of terahertz-wave parametric oscillator based on LiNbO3

This paper investigates the performances of terahertz-wave parametric oscillators(TPOs) based on the LiNbO 3 crystal at different pump wavelengths.The calculated results show that TPO characteristics,including the frequency tuning range,the THz-wave gain and the stability of THz-wave output direction based on the Si-prism coupler,can be significantly improved by using a short-wavelength pump.It also demonstrates that a long-wavelength-pump allows the employment of a short TPO cavity due to an enlarged phase-matching angle,that is,an increased angular separation between the pump and oscillated Stokes beams under the THz-wave generation at a specific frequency.The study provides an useful guide and a theoretical basis for the further improvement of TPO systems.     

基于钽酸锂晶体的太赫兹波参量振荡器运转特性的研究

基于晶格振动模受激电磁耦子散射过程的基本原理,对由LiTaO₃（LT）晶体组成的太赫兹波参量振荡器（TPO）的输出调谐特性、增益和吸收损耗特性,以及基于硅棱镜阵列耦合装置的THz波输出特性等方面进行了详细的理论研究和分析.研究结果表明,基于LiTaO₃晶体A₁对称性晶格振动的特点以及自身优异的非线性光学特性,通过利用短波长抽运光、适当提高抽运能量以及缩短TPO谐振腔腔长等方法,完全可以实现LT-TPO的高性能运转,证明了LiTaO₃晶体是一种性能优良的TPO工作介质.理论计算结果及方法为以后的LT-TPO实验工作提供了详实的理论依据和实验指导. 关键词： 非线性光学 THz辐射 3晶体')" href="#">LiTaO₃晶体 电磁耦子     

超高灵敏度太赫兹超导探测器

太赫兹(THz)波段一般定义为0.1–10 THz的频率区间, 对应波长范围3 mm–30 μm, 覆盖短毫米波至亚毫米波段(远红外). 尽管人们早已认识到太赫兹波段具有非常重要的科学意义和广泛的应用前景, 但该波段仍然是一个有待全面研究和开发的电磁频率窗口. 因此, 太赫兹波段的天文观测在天体物理及宇宙学研究中具有不可替代的作用, 对于理解宇宙状态和演化具有非常重要的意义. 具有超高灵敏度的太赫兹超导探测器, 已经成为太赫兹波段观测的主要手段. 本文主要阐述了太赫兹超导探测器的基本类型和工作原理, 以及中国科学院紫金山天文台在该领域的主要研究成果和进展.     

Acoustic propagation from a spiral wave front source in an ocean environment

A spiral wave front source generates a pressure field that has a phase that depends linearly on the azimuthal angle at which it is measured. This differs from a point source that has a phase that is constant with direction. The spiral wave front source has been developed for use in navigation; however, very little work has been done to model this source in an ocean environment. To this end, the spiral wave front analogue of the acoustic point source is developed and is shown to be related to the point source through a simple transformation. This makes it possible to transform the point source solution in a particular ocean environment into the solution for a spiral source in the same environment. Applications of this transformation are presented for a spiral source near the ocean surface and seafloor as well as for the more general case of propagation in a horizontally stratified waveguide.     

Effects of Spatial Coherence and Dispersive Diffraction on a Change in Optical Spectrum

This paper describes a change in optical spectrum on propagation in free space for a particular class of spatially partially coherent fields emanating from a polychromatic secondary source. A rectangular opening aperture in an opaque screen, illuminated with an extended incoherent polychromatic primary source, works as the secondary source. The spectral change is explored in detail theoretically and experimentally in association with spatial coherence in the secondary source as well as dispersive diffraction by the secondary source. The peak shift of the spectrum is associated with the coherence area for characterizing the secondary source. The peak shift becomes maximum if the secondary source is spatially coherent, but no shift occurs if the secondary source is spatially incoherent.     

Source implementation to eliminate low-frequency artifacts in finite difference time domain room acoustic simulation

The finite difference time domain (FDTD) method is a numerical technique that is straight forward to implement for the simulation of acoustic propagation. For room acoustics applications, the implementation of efficient source excitation and frequency dependent boundary conditions on arbitrary geometry can be seen as two of the most significant problems. This paper deals with the source implementation problem. Among existing source implementation methods, the hard source implementation is the simplest and computationally most efficient. Unfortunately, it generates a large low-frequency modulation in the measured time response. This paper presents a detailed investigation into these side effects. Surprisingly, some of these side effects are found to exist even if a transparent source implementation is used. By combing a time limited approach with a class of more natural source pulse function, this paper develops a source implementation method in FDTD that is as simple and computationally as efficient as a hard source implementation and yet capable of producing results that are virtually the same as a true transparent source. It is believed that the source implementation method developed in this paper will provide an improvement to the practical usability of the FDTD method for room acoustic simulation.     

Active noise control in ducts: some physical insights

The mechanisms of active noise control in a duct are examined. Acoustical measurements are used to determine directly the acoustic power flow associated with both primary and secondary sources as a function of secondary to primary source strength ratio and volume velocity relative phase angles. A complete analytical model is also developed which allows calculation of individual source power flows and total downstream power flow as a function of source strengths and relative phase angles for finite size sources. It is evaluated for monopole and dual secondary source arrangements, but can be extended easily to any number of secondary sources. The model considers a finite size primary source in the plane of the duct cross section and evaluates the effect that the secondary sources have on the primary source power output. Measurements of individual source output powers and total downstream acoustic powers agree well with theoretical predictions. It is demonstrated that, for the monopole system, sound attenuation is achieved primarily by suppression of the primary source acoustic power output, with a little remaining power being absorbed by the secondary source. For the dual secondary source system, it is shown that the power is primarily absorbed by the secondary sources, but that, at phase and amplitude values slightly different to optimum, noise reduction is achieved by a combination of energy absorption and primary source power suppression. The analysis also demonstrates the dependence of the achievable noise reduction on secondary source size and location with respect to the primary source.