核壳式碳纳米管-萘夫西林分子印迹聚合物的制备及应用

采用溶胶-凝胶的方法,以碳纳米管为载体,萘夫西林(Nafcillin)为模板,无水乙醇为溶剂,氨丙基三乙氧基硅烷(APTES)和苯基三甲氧基硅烷(PTMOS)为双功能单体,四乙氧基硅烷(TEOS)为交联剂,合成核壳结构萘夫西林分子印迹聚合物(CNTs@Naf-MIPs).用透射电子显微镜(TEM)、傅立叶变换红外光谱仪(FT-IR)对萘夫西林分子印迹聚合物的结构、形貌进行了表征;对其吸附性能进行了详细研究,CNTs@NafMIPs对模板分子的吸附符合Langmuir方程,Qmax为9.5 mg/g,KD为56.6 mL/mg.制备的印迹聚合物只需30 min达到吸附平衡,吸附-解吸循环5次后,性能稳定.将其应用于加标5和10 μg/kg萘夫西林的鸡蛋样品的选择性富集,回收率可达61.3％～84.3％,准确性较好.     

碳纳米管在简单荷载作用下的变形屈曲行为研究

采用分子动力学方法研究了不同螺旋性的单壁碳纳米管在轴压、扭转和外压分别作用下的变形屈曲行为。针对每种加载形式，给出了宏观形式的内力一变形曲线来反映碳原子间相互作用力的变化与碳管变形量之间的关系。对碳管在这三种不同荷载作用下的失稳特性、微观结构和应变能的变化进行了详细的分析。结合经典弹性理论和本文的模拟结果，得出了单壁碳纳米管的等效壁厚、弹性模量和Poisson比。另外，通过对比不同螺旋性碳管的模拟结果，讨论了螺旋性对碳纳米管力学行为的影响。文中采用的势能函数为Brenner多体势。     

GUIDED CIRCUMFERENTIAL WAVES IN DOUBLE-WALLED CARBON NANOTUBES

A model of guided circumferential waves propagating in double-walled carbon nan- otubes is built by the theory of wave propagation in continuum mechanics,while the van der Waals force between the inner and outer nanotube has been taken into account in the model.The dispersion curves of the guided circumferential wave propagation are studied,and some dispersion characteristics are illustrated by comparing with those of single-walled carbon nanotubes.It is found that in double-walled carbon nanotubes,the guided circumferential waves will propagate in more dispersive ways.More interactions between neighboring wave modes may take place.In particular,it has been found that a couple of wave modes may disappear at a certain frequency and that,while a couple of wave modes disappear,another new couple of wave modes are excited at the same wave number.     

Explicit solution of the radial breathing mode frequency of single-walled carbon nanotubes

On the basis of a molecular mechanics model, an analytical solution of the radial breathing mode (RBM) frequency of single-walled carbon nanotubes (SWCNTs) is obtained. The effects of tube chirality and tube diameter on the RBM frequency are investigated and good agreement between the present results and existing data is found. The present analytical formula indicates that the chirality and size dependent elastic properties are responsible for the effects of the chirality and small size on the RBM frequency of an SWCNT. The project supported by the National Natural Science Foundation of China (10402019), Shanghai Rising-Star Program (05QMX1421), Shanghai Leading Academic Discipline Project (Y0103), and Key Project of Shanghai Committee of Science and Technology (04JC14034).     

电流对碳纳米管-银-石墨复合材料摩擦磨损性能的影响

采用粉末冶金方法制备了碳纳米管-银-石墨复合材料,研究了复合材料在机械磨损和带电磨损2种状态下的摩擦磨损性能及接触电压降的变化情况.结果表明,复合材料在带电磨损条件下的摩擦系数和磨损体积损失均比不带电条件下的大.这是由于外加电场不利于保持摩擦副接触表面在摩擦热等作用下形成润滑膜的均匀性和完整性所致.此外,在带电磨损条件下,阳极的磨损体积损失比阴极的大.其原因在于,摩擦副接触表面润滑膜中的水在电场作用下发生离解,在正刷侧释放出活性氧,活性氧与电刷表层中的碳或金属发生氧化反应,从而使得磨损加剧.     

Zr改性MnO_x/MWCNTs催化剂的结构特征与低温SCR活性

以ZrO(NO3)2·2H2O为前驱体对多壁碳纳米管(MWCNTs)进行了改性并负载MnOx制备了MnOx/ZrO2/MWCNTs催化剂.考察了Zr对催化剂低温选择性催化还原(SCR)反应活性的影响,并通过多种分析手段对催化剂的结构进行了表征.结果表明Zr的添加对催化剂的低温SCR活性具有显著的促进作用,当Zr负载量为30%时,催化剂活性最佳.X射线衍射(XRD)、拉曼(Raman)光谱、透射电镜(TEM)、N2吸附-脱附的表征结果分析表明,适量的Zr改性促进了MnOx在载体表面的分散,增强金属氧化物与MWCNTs之间的作用,也能增加催化剂的比表面积、孔容和孔径.X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)和NH3程序升温脱附(NH3-TPD)的分析结果则显示,Zr能提高催化剂表面化学吸附氧浓度,促进Mn3+转化为Mn4+,从而使催化剂表面的活性位点增多,氧化还原能力增强,同时还提高了催化剂表面酸性位点的数量和强度,促进了NH3的吸附,是MnOx/ZrO2/MWCNTs催化剂低温SCR活性提高的主要原因.     

新型碳纳米结构的发现与启示

回顾了C60、碳纳米管和石墨烯3种重要碳纳米结构的发现过程,着重总结了新型碳单质发现过程中对科学研究者有益的启示与思考。     

碳纳米管/聚氨酯杂化膜的原位聚合构建及气体渗透性能

采用H2SO4/HNO3混酸处理得到不同氧化程度的多壁碳纳米管(MWCNT-COOH),再通过与4,4′-二苯基甲烷二异氰酸酯(MDI)、1,4-丁二醇(BDO)的预聚和扩链反应构建碳纳米管/聚氨酯(MWCNT-COOH/PU)杂化膜。利用傅里叶红外光谱(FTIR)、拉曼光谱(Raman)和透射电子显微镜(TEM)等分析表征多壁碳纳米管结构;探讨了多壁碳纳米管氧化程度和填充量对MWCNTCOOH/PU杂化膜的形貌和CO2、N2渗透性能的影响。结果表明,混酸处理后的多壁碳纳米管带有一定的含氧基团,并随氧化程度的提高,多壁碳纳米管的拉曼光谱G峰和D峰的强度之比(ID/IG)有所增大;氧化程度对多壁碳纳米管在溶剂和杂化膜中的分散性有较大影响,氧化程度越高,分散性越好;杂化膜的CO2、N2渗透性及CO2/N2渗透选择性随多壁碳纳米管氧化程度的增加有所增大,而随多壁碳纳米管填充量的增加表现出先增大后减小的趋势,当氧化程度较高的多壁碳纳米管(H-MWCNT-COOH)填充量为1.0wt%时,H-MWCNT-COOH/PU杂化膜的CO2渗透系数为67.8 Barrer,CO2/N2渗透选择性可达45,表明适量填充MWCNT-COOH能显著提高MWCNT/PU杂化膜的CO2渗透性及CO2/N2的渗透选择性。     

Photoelectrochemical properties of MWCNT-TiO2 hybrid materials as a counter electrode for dye-sensitized solar cells

The MWCNT-Ti02 hybrid materials were prepared by a simply mixing method and used as a counter electrode （CE） for dye-sensitized solar cells. Compared with the platinum CE, MWCNT-TiO2 CE has the similar redox voltage and current response in the cyclic voltammetry. The electrochemical catalytic activity was characterized by the electrochemical impedance spectroscopy and Tafel curve, including the equivalent circuit, the exchange current density, the limiting diffusion current density, and the diffusion coefficient of triiodide/iodide redox species. The results indicate that the reduction process from triiodide to iodide is determined by the kinetic-controlled and diffusion-limited processes. The device performance is optimal based on the MWCNT-TiO2 （mass ratio of 2：1） CE, such as the open-circuit voltage of 0.72 V, the short-circuit photocurrent density of 15.71 mA/cm2, the fill factor of 0.68, and the photon-to-electron conversion efficiency of 7.69%.     

Detection of dopamine using self-assembled diazoresin/single-walled carbon nanotube modified electrodes

Ultrathin films of diazoresin(DR)/single-walled carbon nanotube(SWNT) were fabricated on thioglycollic acid(TGA) decorated gold(Au) electrodes by the self-assembly method combined with the photocrosslinlcing technique.The electrochemical behavior of dopamine(DA) at the DR/SWNT modified electrodes was studied using the cyclic voltammetry(CV) and differential pulse voltammetry(DPV) methods.Under the optimal conditions,a linear CV response to DA concentration from 1 μmol/L to 40 μmol/L was observed,and the detection limit of DA was 2.1 ×10~(-3) μmol/L via the DPV method in the presence of 10 μmol/L of uric acid(UA) or 2.5 × 10~(-3) μmol/L via the DPV method in the presence of10 μmol/L of ascorbic acid(AA).Moreover,the modified electrodes exhibited good reproducibility and sensitivity,demonstrating its feasibility for analytical purposes.