磁性PS-DEA树脂的制备与表征

利用二乙醇胺(DEA)对氯甲基化聚苯乙烯基树脂(PS-Cl)进行表面改性,制备了亲水性的PS-DEA树脂,然后以FeCl3·6H2O和FeSO4·7H2O为前驱体通过共沉淀法原位复合制备了磁性PS-DEA树脂.表征了磁性PS-DEA样品的形貌、结构以及磁性能,研究了PS-DEA和磁性PS-DEA对水溶液中Hg(Ⅱ)的吸附性能.结果表明,含有Fe3O4的磁性PS-DEA树脂的比饱和磁化强度(Ms)为0.92 A·m2/kg,磁性树脂中Fe3O4所占的质量分数为1.7%.用Langmuir等温模型拟合了PS-DEA和磁性PS-DEA对水溶液中Hg(Ⅱ)的吸附数据,计算得到最大吸附量分别为320.51和352.11 mg/g,这表明磁性纳米粒子的引入有利于提高树脂的吸附性能,这种磁性树脂有望作为吸附剂用于水处理领域.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

基于表面等离子体子共振成像技术研究苏拉明和顺铂对肝癌细胞生长的抑制作用简

基于表面等离子体子共振成像(SPRi)技术提出了一种实时、非标记的新型抗癌药物药效评估方法. 以聚二甲基硅氧烷(PDMS)为材料,制作了包含微柱结构的微流控芯片作为流通反应池,配合自行设计组装的SPRi生物传感器完成肿瘤细胞的特异性捕获及检测,研究了苏拉明和顺铂对肝癌细胞HepG2的生长抑制作用. 同时引入辅助验证实验,即采用常规八肽胆囊收缩素(简称CCK-8)法测定上述药物对肝癌细胞增殖的抑制作用. SPRi检测结果表明,苏拉明和顺铂能抑制肿瘤细胞HepG2增殖并呈现剂量、时间依赖关系.     

采用反应挤出三次加料法合成苯乙烯/异戊二烯/苯乙烯

以同向啮合双螺杆挤出机为反应器,采用苯乙烯和异戊二烯为聚合单体,以正丁基锂为引发剂,采用三次加料法合成苯乙烯/异戊二烯/苯乙烯(SIS)三嵌段热塑性弹性体.氢核磁共振(1H NMR)谱分析结果表明,共聚物中聚异戊二烯嵌段以1,4-结构为主.采用四氧化锇催化双氧水氧化降解聚合物分子链,利用凝胶渗透色谱对氧化降解后的聚苯乙烯碎片进行分析,证明共聚物分子为(聚苯乙烯-聚异戊二烯-聚苯乙烯)(PS-PI-PS)三嵌段结构.动态力学分析(DMA)及透射电子显微镜(TEM)分析结果表明,SIS具有两相分离结构.拉伸试验结果表明,共聚物拉伸强度与苯乙烯含量有关.     

一锅法合成基于丁二炔-苯环冠醚的[2]轮烷

以丁二炔-苯环冠醚作为大环化合物,以带有4,4'-联吡啶正离子结构的线性分子作为半封端分子,通过简便的一锅法合成一种新的[2]轮烷分子,产率为24%.经高分辨质谱、核磁共振氢谱、核磁共振碳谱等手段确认了丁二炔-苯环冠醚大环与带有两个4,4'-联吡啶二正离子的线性封端分子组装形成[2]轮烷结构,且丁二炔-苯环冠醚在线性分子的两个识别点间作往返运动.     

锡粉促进下由醛、芳甲酰肼和烯丙基溴“一锅法”合成高烯丙基酰肼化合物

报道了锡粉促进下,以四氢呋喃(THF)为溶剂,在室温条件下,通过醛、芳甲酰肼和烯丙基溴"一锅法"反应,合成高烯丙基酰肼化合物的方法.该方法具有条件温和,不使用任何催化剂,操作简单,产率高等优点.     

低温溶剂热法制备5V级性能优异的LiCr_(0.2)Ni_(0.4)Mn_(1.4)O_4正极材料(英文)

通过低温溶剂热的方法成功制备出了LiCr0.2Ni0.4Mn1.4O4尖晶石正极材料。通过此法,溶液的饱和蒸汽压急剧降低且在室温(25℃)下即可沸腾。所有的金属离子可在随后的热聚合过程中均匀分散且煅烧后所得材料无杂质相生成。采用了热重分析,X射线衍射,扫描电镜、循环伏安,交流阻抗等测试手段对材料进行了表征。结果表明:此法所得材料含有Mn3+,为Fd3m晶型,且其形貌规则、粒度分布均一。1C和10C下放电容量为140.5和121.0 mAh·g-1,10C下100次循环容量保持率高达96.9%。其优异的电化学性能可归因于均相的前驱体制备过程,高结晶度且无杂相生成,以及较高的锂离子扩散系数诸因素的共同作用。     

Ceric ammonium nitrate supported HY-zeolite：An efficient catalyst for the synthesis of 1, 8-dioxo-octahydroxanthenes

Ceric ammonium nitrate （CAN） supported HY-zeolite has been used as an efficient catalyst for the one- pot synthesis of 1,8-dioxo-octahydroxanthenes from the readily available 1,3-diketone and aromatic aldehydes under solvent-free conditions. The present methodology is cost-effective in addition to other advantages like high yields of products in shorter reaction time and simple workup procedure without the use of any injurious solvents.     

One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.     

Simultaneous determination of dihydroxybenzene isomers utilizing a thiadiazole film electrode

The present study reports a sensitive electro-analytical method for the simultaneous determination of dihydroxybenzene isomers by using a thiadiazole film electrode, which was readily prepared by electropolymerization of 2,5-dimercapto-1,3,4-thiadiazole on a glassy carbon electrode with cyclic voltammetry. The functionalized electrode has a distinguishable and sensitive response to dihydroxybenzene isomers. Under the optimized conditions, the linear stripping peak currents showed good linear relationships with hydroquinone, catechol and resorcinol at concentration ranges 0.50-120, 0.50-110 and 1.00-110 μmol/L, and the detection limits are 0.1, 0.1 and 0.3 μmol/L, respectively. The proposed method is applicable to the simultaneous determination of dihydroxybenzene isomers in real samples with the relative standard deviations of less than 5.7% and the recovery rates of 95.6%-106%. The constructed electrode is characterized by simple preparation, good selectivity, and high sensitivity advantages.