Neurotransmitter Biomolecule Transfers Across Liquid/Liquid Interface Through A Thick Organic Membrane-Modified Electrode

Electrochemical studies at liquid/liquid interfaces (L/L, or soft interfaces) have disclosed a biomimetic model to mimic charge transfers at cytomembrane surface. Herein, we reported two neurotransmitter biomolecules of dopamine and adrenalone across the L/L interface by a thick organic membrane-modified electrode. This system comprised polarized electrode/oil and oil/water interfaces in series in which the electron transfer (ET) of redox 7,7,8,8-tetracyanoquinodimethane (TCNQ) at electrode/oil interface drove ion transfer (IT) of biomolecules at oil/water interface. This ET-IT coupled reaction overcame the limitation of polarized potential window at conventional single polarized L/L interface. The crucial design of a thick organic membrane could ensure the generated TCNQ anions maintained at electrode/oil interface during the voltammetry, which could not result in interruptions to biomolecule transfers. Through this system, their Gibbs transfer free energies were accurately determined (44.4 and 39.4 kJ mol^?1 for dopamine and adrealone, respectively). Moreover, facilitated biomolecule transfers were evaluated by crown ionophores where both facilitated numbers and constants were determined simultaneously. Owing to the simple electrochemical setup, this system would hold great potentials in future hydrophilic biomacromolecule transfers, such as DNA, peptides and proteins.     

Direct contact ultrasound for fouling control and flux enhancement in air-gap membrane distillation

Air Gap Membrane distillation (AGMD) is a thermally driven separation process capable of treating challenging water types, but its low productivity is a major drawback. Membrane fouling is a common problem in many membrane treatment systems, which exacerbates AGMD’s low overall productivity. In this study, we investigated the direct application of low-power ultrasound (8–23 W), as an in-line cleaning and performance boosting technique for AGMD. Two different highly saline feedwaters, namely natural groundwater (3970 μS/cm) and RO reject stream water (12760 μS/cm) were treated using Polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) membranes. Theoretical calculations and experimental investigations are presented, showing that the applied ultrasonic power range only produced acoustic streaming effects that enhanced cleaning and mass transfer. Attenuated Total Reflection Fourier-Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that ultrasound was capable of effectively removing silica and calcium scaling. Ultrasound application on a fouled membrane resulted in a 100% increase in the permeate flux. Cleaning effects accounted for around 30–50% of this increase and the remainder was attributed to mass transfer improvements. Contaminant rejection percentages were consistently high for all treatments (>99%), indicating that ultrasound did not deteriorate the membrane structure. Scanning Electron Microscopy (SEM) analysis of the membrane surface was used to confirm this observation. The images of the membrane surface demonstrated that ultrasound successfully cleaned the previously fouled membrane, with no signs of structural damage. The results of this study highlight the efficient and effective application of direct low power ultrasound for improving AGMD performance.     

Electrospun fibrous membranes of poly (lactic-co-glycolic acid) with β-tricalcium phosphate for guided bone regeneration application

Guided bone regeneration (GBR) have been proved great success for the treatment of bone defects in oral implantology. Bone defects are reconstructed by the use of a barrier membrane which prevents the invasion of soft tissue and create a space for guiding new bone growth into the bone defect. To develop GBR membranes with higher bioactivity, poly (lactic-co-glycolic acid) (PLGA) fibrous membranes containing β-tricalcium phosphate (β-TCP) were fabricated via electrospinning. The presence of 5 wt% and 10 wt% of β-TCP in the fibers improved mechanical properties. In vitro biocompatibility results have shown that all membranes are non-cytotoxic and the presence of β-TCP increased cell adhesion and proliferation. Furthermore, cell viability results demonstrated that the presence of 5 wt% β-TCP is advantageous for osteoblast proliferation. Therefore, the results suggest that PLGA with 5 wt% β-TCP fibrous membranes meet the requirement of morphological, physical, mechanical and bioactive properties for an effective GBR membrane.     

Monitoring the temperature of a direct contact membrane distillation

This paper deals with the heat transfer monitoring occurring within an inaccessible membrane distillation system. The membrane separates heated sea water and filtered cooled drinkable water. By adjusting the temperature of the incoming heated sea water and knowing its temperature distribution, engineers can keep its temperature within its best operating parameters and avoid hot spots to form. This would help prolong its life cycle and minimize the cost of the distillation process. In particular, we show that an external observation is enough to reconstruct the temperature of the membrane, which is considered as an unknown source term in a parabolic system.     

Recovery of biological active catechol‐O‐methyltransferase isoforms from Q‐sepharose

The development of new catechol‐O‐methyltransferase inhibitors has led to an improvement in the treatment of Parkinson's disease. However, despite the fact that the soluble isoform has been extensively investigated, few studies have been published concerning membrane isoform chromatographic recovery and bioactivity levels. In this work, chromatographic profiles of both catechol‐O‐methyltransferase isoforms were compared using quaternary amine as a ligand to evaluate its activity levels and recovery rates. Results show that both proteins required different conditions for adsorption; the soluble isoform adsorption was performed at low ionic strength, while the membrane isoform required increasing linear salt gradient. However, the application of 0.5% Triton X‐100 promoted membrane isoform adsorption even at low ionic strength. Indeed, chromatographic conditions of both isoforms became similar when detergents were applied. The developed methods also appear to be highly effective in bioactivity recovery, presenting rates of 107% for soluble protein and 67 and 91% for membrane isoform without and with detergents, respectively. The chromatographic strategies with and without detergents resulted in a 4.3‐ and sevenfold purification, respectively, corresponding to specific activity values of 331 and 496 nmol/h/mg. Thus, the use of Q‐sepharose as anion exchanger was effective in the recovery of both enzymes, which is a requirement for further kinetic and pharmacological trials.     

Morphological characterisation of vesicular structures in the canine ejaculate

Membrane vesicles (MV) have been identified in seminal plasma from various species and they are thought to have a significant impact on semen quality and fertilisation. Although recently presence of MV has been also described in the canine ejaculate, detailed knowledge on their morphology is missing by now. This is, however, needed to provide a basis for detailed biochemical and functional studies as it is generally assumed that different MV populations are responsible for distinct tasks. MV were prepared for light (LM) and transmission electron microscopy (TEM) analysis using samples from normospermic dogs (n = 15), hypokinozoospermic dogs (n = 2, h) and one castrated azoospermic dog (a). For TEM, a new preparation protocol was used resulting in a higher MV retrieval rate. Using fractionated semen samples, most MV were identified in the second (sperm-rich) fraction in LM. Using pooled ejaculates, three different MV types could be identified in LM: (1) large MV with a marginal accumulation of opaque, granulated material, (2) medium- to small size MV with dense, opaque content and (3) small MV with no further defined contents. No direct contact between sperm and MV could be visualised. In TEM, 11 different MV types were identified based on diameter, structure, contents and electron density of contents as well as presence, number and size of smaller MV inside the MV itself. In normospermic males, secondary vesicles (type i, H, K1/2) included smaller vesicles and had a weighted mean diameter of 409.46 nm; hereof types i, H and K1 were smaller (mean: 287.55 nm, range: 51.25–994.86 nm) and type K2 was larger (mean: 1746.43 nm, range: 1003.66–3289.34 nm). Primary vesicles (mean diameter: 135.29 nm) – without vesicles inside – were differentiated into larger MV (A, B, C1/2) with a mean diameter of 219.63 nm (range: 39.08–1300.13 nm) and small primary MV (F, G) with a mean diameter of 66.12 nm (range: 24.62–99.84 nm). Whereas all mentioned MV were round to oval and mostly double-, rarely multiple-membrane surrounded, one longish primary MV type (L) was identified. In general, small primary vesicles were most common independent of semen quality, but distribution frequency of vesicle types differed between normospermic, pathospermic dogs and the castrated male. Mean weighted diameter of MV was 195.14 nm (range: 24.62–3289.34 nm) in normospermic males with the maximum diameter being smaller in the other dogs (h: 2096.78 nm; a: 1314.06 nm). Our results provide new information about ultrastructure and distribution frequency of canine MV in normospermic males and point to possible differences in MVs depending on semen quality. They provide the basis for further detailed functional analysis of MV subpopulations. Furthermore, the presence of MV in the castrated azoospermic male confirms an at least partly prostatic origin of canine MV.     

Array P systems with permitting features

The biologically inspired model, known as P system, has proved to be a general framework for investigating several problems related to computing in different fields. Two-dimensional picture array languages is one such area in which different kinds of P systems have been constructed for picture array generation. Incorporating the feature of permitting symbols in the rules, a new variety of array P system is constructed here for generating picture languages consisting of picture arrays. The advantage of this approach is that there is a reduction in the number of membranes used in the construction, in comparison to the existing array P system models.     

膜分离样品前处理技术

高通量的自动化样品前处理技术正越来越引起分析化学家的关注。综述了常用的膜分离样品前处理技术的原理、影响因素、联用技术及应用。引用文献63篇。     

An insight to the filtration mechanism of Pb(II) at the surface of a clay ceramic membrane through its preconcentration at the surface of a graphite/clay composite working electrode

The use of cyclic voltammetry (CV) and linear scan anodic stripping voltammetry (LSASV) to predict the selectivity of microfiltration ceramic membranes made from a lump of local clay towards Pb(II) ions filtration is described. The membranes were characterized by different techniques followed by CV analysis of the Fe(CN)₆^3-/Fe(CN)₆^4- redox couple and Pb(II) on bare graphite, raw clay, and clay-modified carbon paste electrode (clay-modified CPE). The effect of clay loading in the range of 1–10 % (w/w) on the electrodes is studied, where an enhanced peak current is observed for 5 % w/w clay. Moreover, a decrease in the peak current can be seen for bare graphite electrodes, suggesting that the clay mineral had played a substantial role in the sieving of heavy metal ions through the ceramic membrane. The electroactive surface area of 5% w/w raw clay towards Fe(II) ions was found to be in the order of 3.07 × 10^-2 cm² and higher than 5% w/w clay sintered to 1000 °C and bare graphite. CV analysis shows that both, 5 % w/w raw clay and 5 % w/w clay sintered to 1000 °C exhibited high peak currents towards Pb(II) ions. The mobility of the Pb(II) ions is found to increase when 5% w/w clay sintered to 1000 °C is utilized as membrane/electrode, leading to an increase in the amount of reduced Pb(II) ions on the surfaces of the clay membranes/electrodes. The study suggests successful filtration of Pb(II) ions through the proposed membrane/electrode and a much better accumulation than Fe(II) at the surface of the membrane/electrode before being subjected to filtration.