Rheology of poly(methyl methacrylate-<Emphasis Type="Italic">co</Emphasis>-styrene) particles suspended in water: effects of electrostatic surface layer

 Linear and nonlinear viscoelastic properties were examined for aqueous suspensions of monodisperse poly(methyl methacrylate-co-styrene) (MS) particles having the radius a ₀ =45 nm and the volume fractions φ=0.428−0.448. These particles had surface charges and the resulting electrostatic surface layer (electric double layer) had a thickness of t_s=5.7 nm. At low frequencies in the linear viscoelastic regime, the MS particles behaved approximately as the Brownian hard particles having an effective radius a _eff=a ₀ + t_s, and the dependence of their zero-shear viscosity η₀ on an effective volume fraction φ_eff (={a _eff/a ₀}³φ) agreed with the φ dependence of η₀ of ideal hard-core silica suspensions. In a range of φ_eff < 0.63, this φ_eff dependence was well described by the Brady theory. However, the φ_eff dependence of the high-frequency plateau modulus was weaker and the terminal relaxation mode distribution was narrower for the MS suspensions than for the hard-core suspensions. This result suggested that the electrostatic surface layer of the MS particles was soft and penetrable (at high frequencies). In fact, this “softness” was more clearly observed in the nonlinear regime: the nonlinear damping against step strain was weaker and the thinning under steady shear was less significant for the MS suspension than for the hard-core silica suspensions having the same φ_eff. These weaker nonlinearities of the concentrated MS particles with φ_eff∼ 0.63 (maximum volume fraction for random packing) suggested that the surface layers of those particles were mutually penetrating to provide the particles with a rather large mobility. Received: 10 July 2001 Accepted: 2 November 2001     

正交各向异性厚板的边界元解法

本文利用 Hormander 算子法和平面波分解法导出了计入剪切变形的正交各向异性厚板的基本解。建立了计入剪切变形的正交各向异性厚板的边界积分方程。文中详细地讨论了基本解的数值计算,并用边界元法分析了一些算例。     

基于孔压静力触探(CPTU)测试的连云港海相粘土前期固结压力确定方法研究

首先回顾了基于孔压静力触探(CPTU)测试确定前期固结压力的方法,通过连云港海相粘土场地进行的CPTU试验资料,以室内固结试验得到的前期固结压力作为参考值评估了经验方法预测前期固结压力的有效性。最简单的方法是直接建立前期固结压力和净锥尖阻力的关系,同时也是最有效的方法。     

多循环脉冲爆震发动机流场数值研究

针对二维带有收敛扩张喷管的脉冲爆震发动机模型，采用带基元化学反应的Euler方程组和H2、空气的9组分20基元反应，对发动机在前六个工作循环的流场进行了数值模拟。通过对前几个循环流场进行比较，发现脉冲爆震发动机在第五个循环后流场就基本稳定，单循环得到的流场和多循环稳定后的流场有很大的差别，同时喷管对发动机内流场影响特别大。     

稀土元素的摩擦学研究发展概况

本文对稀土元素的摩擦学研究发展概况作了综述与讨论,主要涉及的是稀土金属及稀土无机化合物和稀土配合物作为润滑油、脂及润滑涂层的添加剂的摩擦学特性,并对稀土无机化合物的高温润滑特性、稀土金属及其化合物在高温涂层中的应用作了简要讨论,最后还提出了稀土的摩擦学研究中当前值得注意的几个重要课题。     

Mach reflection of a plane shock wave passing a mountain of 45° inclination

The transition from regular reflection (RR) to Mach reflection (MR) as a plane shock wave diffracts around a triangular mountain of 45° inclination is analysed in this paper, both by optical measurement in a shock tube and by numerical simulation the numerical method developed by Li Yingfan^[1] is of the FLIC type with triangular mesh. The dependence of the critical transition point Lk ofRR→MR on shock Mach numberM _i is analyzed and the variations of the incidence angle ω _i of the impinging shock and the reflection angle ω _r with the distanceL ^* are investigated. Our experimental and numerical results agree well with the theoretical results of Iton and Italya.     

Identification of stiffness, dissipation and input parameters of randomly excited non-linear systems: Capability of restricted potential models (RPM)

A dynamic identification technique in the time domain for time invariant systems under random external forces is presented. This technique is based on the use of the class of restricted potential models (RPM), which are characterized by a non-linear stiffness and a special form of damping, that is a product of the input power spectral density (PSD) matrix and the velocity gradient of a non-linear function of the total mechanical energy. By applying stochastic differential calculus and by specific analytical manipulations, some algebraic equations, depending on the response statistics and on the mechanic parameters that characterize RPM, are obtained. These equations can be used for the dynamic identification of the above mechanic parameters once the response statistics of the system to be identified are evaluated. The proposed technique allows one to identify single-degree-of-freedom or multi-degrees-of-freedom systems in the case of unmeasurable input. Further, the probabilistic characteristics of the external forces can be completely estimated in terms of PSD matrix.     

用于先进半导体制程的光刻反向计算技术(ILT)

此篇论文将介绍一个用于半导体光罩上图样设计以及可用于实际生产的光刻反向计算技术（ILT）。在论文中将讨论有关ILT的最新发展，包括在超成像极限协助图样（SRAF）的生成，可增加制程宽容度的ILT，以及如何生成满足光罩生产标准的图样等方面。从内部的研究结果和客户的使用结果可以看出，ILT已经不再只是一种用于研究的工具，而是已经可以用于先进半导体制程的大规模生产。在对各个环节优化之后，ILT可以增加制程的宽容度，同时将光罩的成本控制在可以接受的水平。     

残余应力对压力容器破坏模式的影响分析

破前漏(简称LBB)是压力容器、核电站设备结构设计与评价中的一个重要准则.表面裂纹准静态扩展的几何形貌变化规律的预测是破前漏(LBB)评判十分重要的课题之一.本文对特定焊接残余应力场加载作用下,含三维表面裂纹的压力容器模型,用有限元软件(ABAQUS)进行了表面裂纹准静态扩展模拟计算,得到在此残余应力场作用下应力强度因子沿裂纹前缘的分布规律.结合外载引起的应力强度因子,就可以判别裂纹的扩展形貌,从而判断结构是否满足LBB要求.