A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

溶液中CO…CO+体系相互作用的理论研究

在B3LYP/6-311+G水平上利用SCRF方法中的Onsager model模型考察了CO…CO+体系在两种介质(水和苯)中可能存在的相互作用复合物,发现由于H2O与CO+之间存在较强的相互作用,在水中仅能存在一种稳定结构,而在苯溶液中存在三种稳定的复合物.通过消除基函数引起的叠加误差(BSSE)和零点振动能(ZPVE)的校正,精确求算出三种复合物在两种介质中的相互作用能,表明溶剂的性质对复合物的稳定性有着重要的影响.     

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane as convenient chiral ligand precursors

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane (t-Bu-BisP*) were prepared and used as chiral diphosphine ligand precursors in Rh-catalyzed asymmetric hydrogenation of methyl (Z)-acetamidocinnamate to afford the hydrogenation product in up to 94% enantioselectivity.     

GM(1,1)改进模型及其应用

根据 GM( 1 ,1 )灰色模型的指数特性 ,通过在区间上求积分给出了关于背景值的一个比较确切的计算公式 ,讨论了由此建立的 GM( 1 ,1 )改进模型的适用范围和预测精度 .结果表明改进模型比原 GM( 1 ,1 )模型适用性要强、模拟和预测精度要高 ,不仅适用于低增长序列、也适用于高增长序列 ,不仅适用于短期预测 ,同样也适用于中、长期预测     

Relative intensity noise of mode-locked fiber grating external cavity semiconductor lasers

The noise of hybrid soliton pulse source (HSPS) with linearly chirped Gaussian apodized fiber Bragg grating is analyzed by couple-mode equations including spontaneous emission noise when the HSPS is mode-locked. Relative intensity noise is calculated using numerical solutions of these equations. It is shown that transform limited pulses are generated over a wide tuning range around the fundamental mode-locking frequency with low spontaneous noise. However, a high noise level affects the operation of device, and therefore transform-limited pulses are not obtainable over a wide tuning range. It is also shown that noise is extremely sensitive to the RF and DC currents, linewidth enhancement factor, gain saturation parameter and spontaneous coupling factor.     

Morphology and spectral properties of thin films of benzoxazole derivatives of biphenyl

We have studied the spectral properties and morphology of thin films (TVD films) formed by thermal vacuum deposition of 4,4′-bis[(E)-1-(1,3-benzoxazol-2-yl)-2-ethenyl]-1,1′-biphenyl and its substituted derivatives. We have shown that introducing bulky 2,2′-oxyhexyl substituents into the biphenyl units leads to a shift of the fluorescence maximum for the TVD films toward shorter wavelengths, a decrease in their photostability, and aggregation of the films during storage. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 300–303, May–June, 2007.     

Degradation process in organic thin film devices fabricated using P3HT

The stability of regioregular poly(3-hexylthiophene 2,5-diyl) (P3HT) thin films sandwiched between indium tin oxide (ITO) and aluminium (Al) electrodes have been investigated under normal environmental conditions (25°C and RH∼45–50%). Electrical and optical properties of ITO/P3HT/Al devices have been studied over a period of 30 days. Mobility μ of the order of 10⁻⁴ cm²/V-s has been obtained from the V ² law in the as-deposited P3HT films. Scanning electron microscopy (SEM) investigations show blistering of Al contacts in devices with a poly(3,4-ethylenedioxythiophene) (PEDOT) interlayer on application of voltage whereas no blistering is seen in devices without PEDOT. The results have been explained in terms of trap generation and propagation and the moisture-absorbing nature of PEDOT.      

五种氨基酸钆络合物的ESR波谱

迄今未见任何稀土氨基酸络合物的ESR波谱报道,本文在合成Gd³⁺分别与甘氨酸、β-丙氨酸、谷氨酸、天冬氨酸和天冬酰胺五种氨基酸络合物的基础上,测定了不同温度下,水溶液、粉末及分子筛吸附样品的ESR谱,讨论了络合物中晶体场强,对称性及成键特性。